Support for TSYS02D temperature sensor Signed-off-by: Ludovic Tancerel <ludovic.tancerel@xxxxxxxxxxxxxxxxx> --- Documentation/ABI/testing/sysfs-bus-iio-meas-spec | 7 + drivers/iio/temperature/Kconfig | 11 ++ drivers/iio/temperature/Makefile | 1 + drivers/iio/temperature/tsys02d.c | 192 ++++++++++++++++++++++ 4 files changed, 211 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-meas-spec create mode 100644 drivers/iio/temperature/tsys02d.c diff --git a/Documentation/ABI/testing/sysfs-bus-iio-meas-spec b/Documentation/ABI/testing/sysfs-bus-iio-meas-spec new file mode 100644 index 0000000..6d47e54 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-meas-spec @@ -0,0 +1,7 @@ +What: /sys/bus/iio/devices/iio:deviceX/battery_low +KernelVersion: 4.1.0 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Reading returns either '1' or '0'. '1' means that the + battery level supplied to sensor is below 2.25V. + This ABI is available for tsys02d, htu21, ms8607 diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig index 35712032..c4664e5 100644 --- a/drivers/iio/temperature/Kconfig +++ b/drivers/iio/temperature/Kconfig @@ -34,4 +34,15 @@ config TSYS01 This driver can also be built as a module. If so, the module will be called tsys01. +config TSYS02D + tristate "Measurement Specialties TSYS02D temperature sensor" + depends on I2C + select IIO_MS_SENSORS_I2C + help + If you say yes here you get support for the Measurement Specialties + TSYS02D temperature sensor. + + This driver can also be built as a module. If so, the module will + be called tsys02d. + endmenu diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile index 368a2a2..02bc79d 100644 --- a/drivers/iio/temperature/Makefile +++ b/drivers/iio/temperature/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_MLX90614) += mlx90614.o obj-$(CONFIG_TMP006) += tmp006.o obj-$(CONFIG_TSYS01) += tsys01.o +obj-$(CONFIG_TSYS02D) += tsys02d.o diff --git a/drivers/iio/temperature/tsys02d.c b/drivers/iio/temperature/tsys02d.c new file mode 100644 index 0000000..f8940d6 --- /dev/null +++ b/drivers/iio/temperature/tsys02d.c @@ -0,0 +1,192 @@ +/* + * tsys02d.c - Support for Measurement-Specialties tsys02d temperature sensor + * + * Copyright (c) 2015 Measurement-Specialties + * + * Licensed under the GPL-2. + * + * (7-bit I2C slave address 0x40) + * + * Datasheet: + * http://www.meas-spec.com/downloads/Digital_Sensor_TSYS02D.pdf + * + */ + +#include <linux/init.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/stat.h> +#include <linux/module.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#include "../common/ms_sensors/ms_sensors_i2c.h" + +#define TSYS02D_RESET 0xFE + +static const int tsys02d_samp_freq[4] = { 20, 40, 70, 140 }; +/* String copy of the above const for readability purpose */ +static const char tsys02d_show_samp_freq[] = "20 40 70 140"; + +static int tsys02d_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int *val, + int *val2, long mask) +{ + int ret; + s32 temperature; + struct ms_ht_dev *dev_data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (channel->type) { + case IIO_TEMP: /* in milli °C */ + ret = ms_sensors_i2c_ht_read_temperature(dev_data, + &temperature); + if (ret) + return ret; + *val = temperature; + + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SAMP_FREQ: + *val = tsys02d_samp_freq[dev_data->res_index]; + + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int tsys02d_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct ms_ht_dev *dev_data = iio_priv(indio_dev); + int i, ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + i = ARRAY_SIZE(tsys02d_samp_freq); + while (i-- > 0) + if (val == tsys02d_samp_freq[i]) + break; + if (i < 0) + return -EINVAL; + mutex_lock(&dev_data->lock); + dev_data->res_index = i; + ret = ms_sensors_i2c_write_resolution(dev_data, i); + mutex_unlock(&dev_data->lock); + + return ret; + default: + return -EINVAL; + } +} + +static const struct iio_chan_spec tsys02d_channels[] = { + { + .type = IIO_TEMP, + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + } +}; + +static ssize_t tsys02_read_battery_low(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ms_ht_dev *dev_data = iio_priv(indio_dev); + + return ms_sensors_i2c_show_battery_low(dev_data, buf); +} + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(tsys02d_show_samp_freq); +static IIO_DEVICE_ATTR(battery_low, S_IRUGO, + tsys02_read_battery_low, NULL, 0); + +static struct attribute *tsys02d_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_battery_low.dev_attr.attr, + NULL, +}; + +static const struct attribute_group tsys02d_attribute_group = { + .attrs = tsys02d_attributes, +}; + +static const struct iio_info tsys02d_info = { + .read_raw = tsys02d_read_raw, + .write_raw = tsys02d_write_raw, + .attrs = &tsys02d_attribute_group, + .driver_module = THIS_MODULE, +}; + +int tsys02d_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ms_ht_dev *dev_data; + struct iio_dev *indio_dev; + int ret; + u64 serial_number; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE | + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + dev_err(&client->dev, + "Adapter does not support some i2c transaction\n"); + return -ENODEV; + } + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data)); + if (!indio_dev) + return -ENOMEM; + + dev_data = iio_priv(indio_dev); + dev_data->client = client; + dev_data->res_index = 0; + mutex_init(&dev_data->lock); + + indio_dev->info = &tsys02d_info; + indio_dev->name = id->name; + indio_dev->dev.parent = &client->dev; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = tsys02d_channels; + indio_dev->num_channels = ARRAY_SIZE(tsys02d_channels); + + i2c_set_clientdata(client, indio_dev); + + ret = ms_sensors_i2c_reset(client, TSYS02D_RESET, 15000); + if (ret) + return ret; + + ret = ms_sensors_i2c_read_serial(client, &serial_number); + if (ret) + return ret; + dev_info(&client->dev, "Serial number : %llx", serial_number); + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id tsys02d_id[] = { + {"tsys02d", 0}, + {} +}; + +static struct i2c_driver tsys02d_driver = { + .probe = tsys02d_probe, + .id_table = tsys02d_id, + .driver = { + .name = "tsys02d", + }, +}; + +module_i2c_driver(tsys02d_driver); + +MODULE_DESCRIPTION("Measurement-Specialties tsys02d temperature driver"); +MODULE_AUTHOR("William Markezana <william.markezana@xxxxxxxxxxxxx>"); +MODULE_AUTHOR("Ludovic Tancerel <ludovic.tancerel@xxxxxxxxxxxxxxxxx>"); +MODULE_LICENSE("GPL v2"); -- 2.3.7 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
