> -----Original Message----- > From: Markus Pargmann [mailto:mpa@xxxxxxxxxxxxxx] > Sent: 21 September, 2015 13:55 > To: Jonathan Cameron > Cc: Srinivas Pandruvada; Tirdea, Irina; Lars-Peter Clausen; linux-iio@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; > kernel@xxxxxxxxxxxxxx; Markus Pargmann > Subject: [PATCH v3 0/4] iio: bmc150 regmap and SPI > > Hi, > Hi Markus, I tested the new version of you patches and everything works fine. I used a BMA250E chip connected on the i2c bus. The tests included the iio buffer code path and the i2c code path (including using the fifo and forcing the i2c bus to use the regmap_i2c_smbus_i2c_block calls you added to regmap). > this series converts the bmc150 driver to use regmap and adds an SPI interface. > > Thanks for testing and review so far. I rebased the series onto v4.3-rc2 now > (the togreg branch seems to be on v4.2). > It still works for me but there were some differences regarding the chip id. > I actually used the togreg branch (to get the latest bmc150 driver changes) and cherry-picked the regmap patches. Everything applied without any conflicts. Thanks, Irina > Changes in v3: > - Fixed type of variable 'step' which lead to compile warnings. Type is now > size_t. > - Fixed patch that moved irq variable without reason > - Readded MODULE_* to the core driver > - Reintroduced check id NULL check > > Changes in v2: > - Removed default values for regmap_config fields. > - Redesigned the fifo_transfer function to avoid running in errors first. > - Dropped irq checks patch as it is already mainline > - Core can now be built as module with autoselection of i2c and spi parts > > As my hardware is missing an interrupt line from the SPI connected bmc150 I am > not able to test the iio buffer code path and the i2c code path. Tests would be > appreciated. > > @Srinivas: > As there were some rebase conflicts on the first patch, I removed your > reviewed-by tag again for the moment. > > Best regards, > > Markus > > > Markus Pargmann (4): > iio: bmc150: Use i2c regmap > iio: bcm150: Remove i2c_client from private data > iio: bmc150: Split the driver into core and i2c > iio: bmc150: Add SPI driver > > drivers/iio/accel/Kconfig | 14 +- > drivers/iio/accel/Makefile | 4 +- > .../accel/{bmc150-accel.c => bmc150-accel-core.c} | 388 ++++++++------------- > drivers/iio/accel/bmc150-accel-i2c.c | 102 ++++++ > drivers/iio/accel/bmc150-accel-spi.c | 80 +++++ > drivers/iio/accel/bmc150-accel.h | 20 ++ > 6 files changed, 366 insertions(+), 242 deletions(-) > rename drivers/iio/accel/{bmc150-accel.c => bmc150-accel-core.c} (82%) > create mode 100644 drivers/iio/accel/bmc150-accel-i2c.c > create mode 100644 drivers/iio/accel/bmc150-accel-spi.c > create mode 100644 drivers/iio/accel/bmc150-accel.h > > -- > 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
