> -----Original Message----- > From: Markus Pargmann [mailto:mpa@xxxxxxxxxxxxxx] > Sent: 20 August, 2015 15:50 > To: Jonathan Cameron > Cc: Srinivas Pandruvada; Tirdea, Irina; Lars-Peter Clausen; linux-iio@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; > kernel@xxxxxxxxxxxxxx; Markus Pargmann > Subject: [PATCH v2 0/4] iio: bmc150 regmap and SPI > > Hi, > Hi Markus, I tested your patches with my BMA250E driver connected on the i2c bus . The code looks good and most of it works. There are a couple of issues I will mention below and in the individual patches. The patches in this version no longer apply cleanly on the togreg branch of the iio tree. I did the rebase myself, but since there were many conflicts I will do another test when you send the new rebased v3. > this series converts the bmc150 driver to use regmap and adds an SPI interface. > > In v1 this was part of the series "Regmap max_raw_io and bmc150 SPI support". > It now depends on "regmap: i2c block support". > I used the patches that were already merged in the regmap tree. This bmc150 series should probably wait until the regmap patches end up in Jonathan's tree, otherwise they will break the build. Thanks, Irina > Changes in v2: > - Removed default values for regmap_config fields. > - Redesigned the fifo_transfer function to avoid running in errors first. > - Dropped irq checks patch as it is already mainline > - Core can now be built as module with autoselection of i2c and spi parts > > As my hardware is missing an interrupt line from the SPI connected bmc150 I am > not able to test the iio buffer code path and the i2c code path. Tests would be > appreciated. > > Best regards, > > Markus > > > Markus Pargmann (4): > iio: bmc150: Use i2c regmap > iio: bcm150: Remove i2c_client from private data > iio: bmc150: Split the driver into core and i2c > iio: bmc150: Add SPI driver > > drivers/iio/accel/Kconfig | 14 +- > drivers/iio/accel/Makefile | 4 +- > .../accel/{bmc150-accel.c => bmc150-accel-core.c} | 398 ++++++++------------- > drivers/iio/accel/bmc150-accel-i2c.c | 99 +++++ > drivers/iio/accel/bmc150-accel-spi.c | 83 +++++ > drivers/iio/accel/bmc150-accel.h | 21 ++ > 6 files changed, 367 insertions(+), 252 deletions(-) > rename drivers/iio/accel/{bmc150-accel.c => bmc150-accel-core.c} (81%) > create mode 100644 drivers/iio/accel/bmc150-accel-i2c.c > create mode 100644 drivers/iio/accel/bmc150-accel-spi.c > create mode 100644 drivers/iio/accel/bmc150-accel.h > > -- > 2.4.6 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
