On 23/08/15 22:06, Nicola Corna wrote: > The maximum possible value for the relative humidity is 55575 (100%RH). > This value, if shifted right by 2 bits, uses 14 bits and masking it with > a 12 bit mask removes 2 meaningful bits. > The masking has been replaced with a range check that sets the minimum > value at 786 (0%RH) and the maximum at 13893 (99.998%RH). > > Signed-off-by: Nicola Corna <nicola@xxxxxxxxxx> > Reviewed-by: Hartmut Knaack <knaack.h@xxxxxx> Applied. > --- > drivers/iio/humidity/si7020.c | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c > index fa3b809..12128d1 100644 > --- a/drivers/iio/humidity/si7020.c > +++ b/drivers/iio/humidity/si7020.c > @@ -57,8 +57,12 @@ static int si7020_read_raw(struct iio_dev *indio_dev, > if (ret < 0) > return ret; > *val = ret >> 2; > + /* > + * Humidity values can slightly exceed the 0-100%RH > + * range and should be corrected by software > + */ > if (chan->type == IIO_HUMIDITYRELATIVE) > - *val &= GENMASK(11, 0); > + *val = clamp_val(*val, 786, 13893); > return IIO_VAL_INT; > case IIO_CHAN_INFO_SCALE: > if (chan->type == IIO_TEMP) > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
