> -----Original Message----- > From: Michael Welling [mailto:mwelling79@xxxxxxxxx] On Behalf > Of Michael Welling > Sent: Monday, August 24, 2015 9:55 AM > To: Greg Wilson-Lindberg > Cc: linux-iio@xxxxxxxxxxxxxxx > Subject: Re: Adding MAX1363 to BBB > > On Mon, Aug 24, 2015 at 09:26:53AM -0700, Greg Wilson-Lindberg wrote: > > I don't know if anybody on this list can answer this, we > are going to add an IIO compatible Maxim MAX1363 4 channel > ADC to our BBB cape and I am not sure how to specify in the > dts file that it is connected to the I2C channel. > > If anyone can give me suggestions, it would be greatly appreciated. > > > > Give this a try: > > &i2c1 { > status = "okay"; > > adc@34 { > compatible = "maxim,max1363"; > vcc-supply = <®_3v3>; > reg = <0x34>; > }; > }; > > This assume you have an i2c1 and reg_3v3 defined. I wasn't sure about specifying the compatible line because the max1363 driver doesn't have a struct of_device_id in it. > > Here is a real example that looks like it uses the same driver: > http://lxr.free-electrons.com/source/arch/arm/boot/dts/imx27-p > hytec-phycard-s-rdk.dts?v=3.14#L56 > > > > Greg Wilson-Lindberg > > Sakura Finetek > > 310-783-5075 > > -- > > To unsubscribe from this list: send the line "unsubscribe > linux-iio" > > in the body of a message to majordomo@xxxxxxxxxxxxxxx More > majordomo > > info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
