Am 2015-07-19 um 15:47 schrieb Jonathan Cameron:
> On 06/07/15 13:34, Martin Kepplinger wrote:
>> For the devices supported by the mma8452 driver, two interrupt pins are
>> available to route the interrupt signals to. By default INT1 is assumed.
>>
>> This adds a simple boolean DT property, for users to configure it for
>> INT2, if that is the wired interrupt pin for them.
>>
>> This is important for everyone to be able to use this driver, no matter
>> how their chip is wired.
>>
>> Since this doesn't change the default behaviour, it doesn't break anything
>> for existing users.
>>
>> Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxxxxxxxxxx>
>> Signed-off-by: Christoph Muellner <christoph.muellner@xxxxxxxxxxxxxxxxxxxxx>
> The whole series looks good to me. Just want those acks from Peter and / or
> Martin before I apply it.
>
> Thanks,
>
> Jonathan
Peter at least replied to the first version of these patches, so he
should be around. I suspect that holidays get in the way now.
While I'm at it: I'll be on holidays pretty much all of august. In
general I could maintain the driver and have more improvements planned
on top of this patchset. Maybe I'll include a maintainers file entry
with those (later this year).
And: It shouldn't apply cleanly at least on your fixes-togreg branch of
iio.git. I don't know if this is in -next but in case you don't want to
resolve the diff, please feel free to ask for a clean version of the
whole patchset against -next at any time.
thanks,
martin
>> ---
>> Documentation/devicetree/bindings/iio/accel/mma8452.txt | 2 ++
>> drivers/iio/accel/mma8452.c | 14 ++++++++------
>> 2 files changed, 10 insertions(+), 6 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
>> index 8d98e05..9bad1fc 100644
>> --- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt
>> +++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
>> @@ -10,6 +10,7 @@ Optional properties:
>>
>> - interrupt-parent: should be the phandle for the interrupt controller
>> - interrupts: interrupt mapping for GPIO IRQ
>> + - use_int2: assume interrupt pin wired to INT2 instead of INT1
>>
>> Example:
>>
>> @@ -18,4 +19,5 @@ Example:
>> reg = <0x1d>;
>> interrupt-parent = <&gpio1>;
>> interrupts = <5 0>;
>> + use_int2;
>> };
>> diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
>> index 2b8ed67..f8ba146 100644
>> --- a/drivers/iio/accel/mma8452.c
>> +++ b/drivers/iio/accel/mma8452.c
>> @@ -1105,12 +1105,14 @@ static int mma8452_probe(struct i2c_client *client,
>> int enabled_interrupts = MMA8452_INT_TRANS |
>> MMA8452_INT_FF_MT;
>>
>> - /* Assume wired to INT1 pin */
>> - ret = i2c_smbus_write_byte_data(client,
>> - MMA8452_CTRL_REG5,
>> - supported_interrupts);
>> - if (ret < 0)
>> - return ret;
>> + /* Assume wired to INT1 pin, except "use_int2" is found in DT */
>> + if (!of_property_read_bool(client->dev.of_node, "use_int2")) {
>> + ret = i2c_smbus_write_byte_data(client,
>> + MMA8452_CTRL_REG5,
>> + supported_interrupts);
>> + if (ret < 0)
>> + return ret;
>> + }
>>
>> ret = i2c_smbus_write_byte_data(client,
>> MMA8452_CTRL_REG4,
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
