On 21/06/15 12:29, Lars-Peter Clausen wrote: > On 06/21/2015 12:18 PM, Hartmut Knaack wrote: >> Rework the help text of several ADCs to make sure that: >> - the module name is mentioned, if the driver can be built as a module >> - "If unsure, say N" messages are dropped >> - right indentation is maintained >> >> Signed-off-by: Hartmut Knaack <knaack.h@xxxxxx> > > Looks good. Thanks. > > Acked-by: Lars-Peter Clausen <lars@xxxxxxxxxx> Applied to the togreg branch of iio.git - will get pushed out as testing sometime, probably at the end of the week. I'm travelling and doing two jobs at the same time for added fun. How many hours are there in the day? J > >> --- >> This patch is based on the cc10001_adc dependency and sort order fixes I >> just submitted. >> >> drivers/iio/adc/Kconfig | 48 ++++++++++++++++++++++++++++++++++++++---------- >> 1 file changed, 38 insertions(+), 10 deletions(-) >> >> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig >> index 4790071..aee1e87 100644 >> --- a/drivers/iio/adc/Kconfig >> +++ b/drivers/iio/adc/Kconfig >> @@ -20,6 +20,9 @@ config AD7266 >> Say yes here to build support for Analog Devices AD7265 and AD7266 >> ADCs. >> >> + To compile this driver as a module, choose M here: the module will be >> + called ad7266. >> + >> config AD7291 >> tristate "Analog Devices AD7291 ADC driver" >> depends on I2C >> @@ -52,8 +55,6 @@ config AD7476 >> AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, >> AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC). >> >> - If unsure, say N (but it's safe to say "Y"). >> - >> To compile this driver as a module, choose M here: the >> module will be called ad7476. >> >> @@ -63,8 +64,7 @@ config AD7791 >> select AD_SIGMA_DELTA >> help >> Say yes here to build support for Analog Devices AD7787, AD7788, AD7789, >> - AD7790 and AD7791 SPI analog to digital converters (ADC). If unsure, say >> - N (but it is safe to say "Y"). >> + AD7790 and AD7791 SPI analog to digital converters (ADC). >> >> To compile this driver as a module, choose M here: the module will be >> called ad7791. >> @@ -76,7 +76,6 @@ config AD7793 >> help >> Say yes here to build support for Analog Devices AD7785, AD7792, AD7793, >> AD7794 and AD7795 SPI analog to digital converters (ADC). >> - If unsure, say N (but it's safe to say "Y"). >> >> To compile this driver as a module, choose M here: the >> module will be called AD7793. >> @@ -89,7 +88,6 @@ config AD7887 >> help >> Say yes here to build support for Analog Devices >> AD7887 SPI analog to digital converter (ADC). >> - If unsure, say N (but it's safe to say "Y"). >> >> To compile this driver as a module, choose M here: the >> module will be called ad7887. >> @@ -117,6 +115,9 @@ config AD799X >> i2c analog to digital converters (ADC). Provides direct access >> via sysfs. >> >> + To compile this driver as a module, choose M here: the module will be >> + called ad799x. >> + >> config AT91_ADC >> tristate "Atmel AT91 ADC" >> depends on ARCH_AT91 >> @@ -127,6 +128,9 @@ config AT91_ADC >> help >> Say yes here to build support for Atmel AT91 ADC. >> >> + To compile this driver as a module, choose M here: the module will be >> + called at91_adc. >> + >> config AXP288_ADC >> tristate "X-Powers AXP288 ADC driver" >> depends on MFD_AXP20X >> @@ -135,6 +139,9 @@ config AXP288_ADC >> device. Depending on platform configuration, this general purpose ADC can >> be used for sampling sensors such as thermal resistors. >> >> + To compile this driver as a module, choose M here: the module will be >> + called axp288_adc. >> + >> config BERLIN2_ADC >> tristate "Marvell Berlin2 ADC driver" >> depends on ARCH_BERLIN >> @@ -142,6 +149,9 @@ config BERLIN2_ADC >> Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for >> temperature measurement. >> >> + To compile this driver as a module, choose M here: the module will be >> + called berlin2-adc. >> + >> config CC10001_ADC >> tristate "Cosmic Circuits 10001 ADC driver" >> depends on HAS_IOMEM && HAVE_CLK && REGULATOR >> @@ -170,12 +180,18 @@ config EXYNOS_ADC >> of SoCs for drivers such as the touchscreen and hwmon to use to share >> this resource. >> >> + To compile this driver as a module, choose M here: the module will be >> + called exynos_adc. >> + >> config LP8788_ADC >> tristate "LP8788 ADC driver" >> depends on MFD_LP8788 >> help >> Say yes here to build support for TI LP8788 ADC. >> >> + To compile this driver as a module, choose M here: the module will be >> + called lp8788_adc. >> + >> config MAX1027 >> tristate "Maxim max1027 ADC driver" >> depends on SPI >> @@ -185,6 +201,9 @@ config MAX1027 >> Say yes here to build support for Maxim SPI ADC models >> max1027, max1029 and max1031. >> >> + To compile this driver as a module, choose M here: the module will be >> + called max1027. >> + >> config MAX1363 >> tristate "Maxim max1363 ADC driver" >> depends on I2C >> @@ -201,6 +220,9 @@ config MAX1363 >> max11646, max11647) Provides direct access via sysfs and buffered >> data via the iio dev interface. >> >> + To compile this driver as a module, choose M here: the module will be >> + called max1363. >> + >> config MCP320X >> tristate "Microchip Technology MCP3x01/02/04/08" >> depends on SPI >> @@ -309,15 +331,18 @@ config TI_AM335X_ADC >> Say yes here to build support for Texas Instruments ADC >> driver which is also a MFD client. >> >> + To compile this driver as a module, choose M here: the module will be >> + called ti_am335x_adc. >> + >> config TWL4030_MADC >> tristate "TWL4030 MADC (Monitoring A/D Converter)" >> depends on TWL4030_CORE >> help >> - This driver provides support for Triton TWL4030-MADC. The >> - driver supports both RT and SW conversion methods. >> + This driver provides support for Triton TWL4030-MADC. The >> + driver supports both RT and SW conversion methods. >> >> - This driver can also be built as a module. If so, the module will be >> - called twl4030-madc. >> + This driver can also be built as a module. If so, the module will be >> + called twl4030-madc. >> >> config TWL6030_GPADC >> tristate "TWL6030 GPADC (General Purpose A/D Converter) Support" >> @@ -350,6 +375,9 @@ config VIPERBOARD_ADC >> Say yes here to access the ADC part of the Nano River >> Technologies Viperboard. >> >> + To compile this driver as a module, choose M here: the module will be >> + called viperboard_adc. >> + >> config XILINX_XADC >> tristate "Xilinx XADC driver" >> depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
