Rework the help text of several ADCs to make sure that: - the module name is mentioned, if the driver can be built as a module - "If unsure, say N" messages are dropped - right indentation is maintained Signed-off-by: Hartmut Knaack <knaack.h@xxxxxx> --- This patch is based on the cc10001_adc dependency and sort order fixes I just submitted. drivers/iio/adc/Kconfig | 48 ++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 38 insertions(+), 10 deletions(-) diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 4790071..aee1e87 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -20,6 +20,9 @@ config AD7266 Say yes here to build support for Analog Devices AD7265 and AD7266 ADCs. + To compile this driver as a module, choose M here: the module will be + called ad7266. + config AD7291 tristate "Analog Devices AD7291 ADC driver" depends on I2C @@ -52,8 +55,6 @@ config AD7476 AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC). - If unsure, say N (but it's safe to say "Y"). - To compile this driver as a module, choose M here: the module will be called ad7476. @@ -63,8 +64,7 @@ config AD7791 select AD_SIGMA_DELTA help Say yes here to build support for Analog Devices AD7787, AD7788, AD7789, - AD7790 and AD7791 SPI analog to digital converters (ADC). If unsure, say - N (but it is safe to say "Y"). + AD7790 and AD7791 SPI analog to digital converters (ADC). To compile this driver as a module, choose M here: the module will be called ad7791. @@ -76,7 +76,6 @@ config AD7793 help Say yes here to build support for Analog Devices AD7785, AD7792, AD7793, AD7794 and AD7795 SPI analog to digital converters (ADC). - If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the module will be called AD7793. @@ -89,7 +88,6 @@ config AD7887 help Say yes here to build support for Analog Devices AD7887 SPI analog to digital converter (ADC). - If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the module will be called ad7887. @@ -117,6 +115,9 @@ config AD799X i2c analog to digital converters (ADC). Provides direct access via sysfs. + To compile this driver as a module, choose M here: the module will be + called ad799x. + config AT91_ADC tristate "Atmel AT91 ADC" depends on ARCH_AT91 @@ -127,6 +128,9 @@ config AT91_ADC help Say yes here to build support for Atmel AT91 ADC. + To compile this driver as a module, choose M here: the module will be + called at91_adc. + config AXP288_ADC tristate "X-Powers AXP288 ADC driver" depends on MFD_AXP20X @@ -135,6 +139,9 @@ config AXP288_ADC device. Depending on platform configuration, this general purpose ADC can be used for sampling sensors such as thermal resistors. + To compile this driver as a module, choose M here: the module will be + called axp288_adc. + config BERLIN2_ADC tristate "Marvell Berlin2 ADC driver" depends on ARCH_BERLIN @@ -142,6 +149,9 @@ config BERLIN2_ADC Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for temperature measurement. + To compile this driver as a module, choose M here: the module will be + called berlin2-adc. + config CC10001_ADC tristate "Cosmic Circuits 10001 ADC driver" depends on HAS_IOMEM && HAVE_CLK && REGULATOR @@ -170,12 +180,18 @@ config EXYNOS_ADC of SoCs for drivers such as the touchscreen and hwmon to use to share this resource. + To compile this driver as a module, choose M here: the module will be + called exynos_adc. + config LP8788_ADC tristate "LP8788 ADC driver" depends on MFD_LP8788 help Say yes here to build support for TI LP8788 ADC. + To compile this driver as a module, choose M here: the module will be + called lp8788_adc. + config MAX1027 tristate "Maxim max1027 ADC driver" depends on SPI @@ -185,6 +201,9 @@ config MAX1027 Say yes here to build support for Maxim SPI ADC models max1027, max1029 and max1031. + To compile this driver as a module, choose M here: the module will be + called max1027. + config MAX1363 tristate "Maxim max1363 ADC driver" depends on I2C @@ -201,6 +220,9 @@ config MAX1363 max11646, max11647) Provides direct access via sysfs and buffered data via the iio dev interface. + To compile this driver as a module, choose M here: the module will be + called max1363. + config MCP320X tristate "Microchip Technology MCP3x01/02/04/08" depends on SPI @@ -309,15 +331,18 @@ config TI_AM335X_ADC Say yes here to build support for Texas Instruments ADC driver which is also a MFD client. + To compile this driver as a module, choose M here: the module will be + called ti_am335x_adc. + config TWL4030_MADC tristate "TWL4030 MADC (Monitoring A/D Converter)" depends on TWL4030_CORE help - This driver provides support for Triton TWL4030-MADC. The - driver supports both RT and SW conversion methods. + This driver provides support for Triton TWL4030-MADC. The + driver supports both RT and SW conversion methods. - This driver can also be built as a module. If so, the module will be - called twl4030-madc. + This driver can also be built as a module. If so, the module will be + called twl4030-madc. config TWL6030_GPADC tristate "TWL6030 GPADC (General Purpose A/D Converter) Support" @@ -350,6 +375,9 @@ config VIPERBOARD_ADC Say yes here to access the ADC part of the Nano River Technologies Viperboard. + To compile this driver as a module, choose M here: the module will be + called viperboard_adc. + config XILINX_XADC tristate "Xilinx XADC driver" depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST -- 2.3.6 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in
