[PATCH v2 5/6] iio: magnetometer: mmc35240: Fix sensitivity on z-axis

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Datasheet says (Page 2) that typical value for sensitivity
for 16 bits mode on Z-axis is 770. Anyhow, looking at the
input driver provided by Memsic the value for MMC35240 is
1024.

Also, testing shows that using 1024 for Z-axis senzitivity
offers better results.

Fixes: abeb6b1e7b ("iio: magnetometer: Add support for MEMSIC MMC35240")
Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxxxx>
---
 drivers/iio/magnetometer/mmc35240.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c
index 7bc72b3..73fa111 100644
--- a/drivers/iio/magnetometer/mmc35240.c
+++ b/drivers/iio/magnetometer/mmc35240.c
@@ -77,7 +77,7 @@ static const struct {
 } mmc35240_props_table[] = {
 	/* 16 bits, 100Hz ODR */
 	{
-		{1024, 1024, 770},
+		{1024, 1024, 1024},
 		32768,
 	},
 	/* 16 bits, 200Hz ODR */
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux