By default all the sensors are runtime suspended state (lowest power
state). During Linux suspend process, all the run time suspended
devices are resumed and then suspended. This caused all sensors to
power up and introduced delay in suspend time, when we introduced
runtime PM for HID sensors. The opposite process happens during resume
process.
To fix this, we do powerup process of the sensors only when the request
is issued from user (raw or tiggerred). In this way when runtime,
resume calls for powerup it will simply return as this will not match
user requested state.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
---
drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 11 ++++++++++-
include/linux/hid-sensor-hub.h | 1 +
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index 610fc98..5955110 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -36,6 +36,8 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
s32 poll_value = 0;
if (state) {
+ if (!atomic_read(&st->user_requested_state))
+ return 0;
if (sensor_hub_device_open(st->hsdev))
return -EIO;
@@ -52,8 +54,12 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
poll_value = hid_sensor_read_poll_value(st);
} else {
- if (!atomic_dec_and_test(&st->data_ready))
+ int val;
+
+ val = atomic_dec_if_positive(&st->data_ready);
+ if (val < 0)
return 0;
+
sensor_hub_device_close(st->hsdev);
state_val = hid_sensor_get_usage_index(st->hsdev,
st->power_state.report_id,
@@ -92,9 +98,11 @@ EXPORT_SYMBOL(hid_sensor_power_state);
int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
{
+
#ifdef CONFIG_PM
int ret;
+ atomic_set(&st->user_requested_state, state);
if (state)
ret = pm_runtime_get_sync(&st->pdev->dev);
else {
@@ -109,6 +117,7 @@ int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
return 0;
#else
+ atomic_set(&st->user_requested_state, state);
return _hid_sensor_power_state(st, state);
#endif
}
diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index 0042bf3..c02b5ce 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -230,6 +230,7 @@ struct hid_sensor_common {
struct platform_device *pdev;
unsigned usage_id;
atomic_t data_ready;
+ atomic_t user_requested_state;
struct iio_trigger *trigger;
struct hid_sensor_hub_attribute_info poll;
struct hid_sensor_hub_attribute_info report_state;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
