On śro, 2015-02-25 at 11:54 +0000, Jonathan Cameron wrote:
> On 24/02/15 09:41, Krzysztof Kozlowski wrote:
> > The regmap_access_table and regmap_config structures may be const
> > because they are not modified by the driver and regmap_init() accepts
> > pointer to const.
> >
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> Applied to the togreg branch of iio.git. Note I ended up hand applying
> this due to DOS line endings and some fuzz.
Thanks! I rebased the patchsed on next-20150224 so I did not expect any
fuzz.
Best regards,
Krzysztof
>
> Jonathan
> > ---
> > drivers/staging/iio/magnetometer/hmc5843_i2c.c | 8 ++++----
> > drivers/staging/iio/magnetometer/hmc5843_spi.c | 8 ++++----
> > 2 files changed, 8 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/staging/iio/magnetometer/hmc5843_i2c.c b/drivers/staging/iio/magnetometer/hmc5843_i2c.c
> > index 6acd614cdbc6..8346cf81fc2e 100644
> > --- a/drivers/staging/iio/magnetometer/hmc5843_i2c.c
> > +++ b/drivers/staging/iio/magnetometer/hmc5843_i2c.c
> > @@ -22,7 +22,7 @@ static const struct regmap_range hmc5843_readable_ranges[] = {
> > regmap_reg_range(0, HMC5843_ID_END),
> > };
> >
> > -static struct regmap_access_table hmc5843_readable_table = {
> > +static const struct regmap_access_table hmc5843_readable_table = {
> > .yes_ranges = hmc5843_readable_ranges,
> > .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges),
> > };
> > @@ -31,7 +31,7 @@ static const struct regmap_range hmc5843_writable_ranges[] = {
> > regmap_reg_range(0, HMC5843_MODE_REG),
> > };
> >
> > -static struct regmap_access_table hmc5843_writable_table = {
> > +static const struct regmap_access_table hmc5843_writable_table = {
> > .yes_ranges = hmc5843_writable_ranges,
> > .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges),
> > };
> > @@ -40,12 +40,12 @@ static const struct regmap_range hmc5843_volatile_ranges[] = {
> > regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG),
> > };
> >
> > -static struct regmap_access_table hmc5843_volatile_table = {
> > +static const struct regmap_access_table hmc5843_volatile_table = {
> > .yes_ranges = hmc5843_volatile_ranges,
> > .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges),
> > };
> >
> > -static struct regmap_config hmc5843_i2c_regmap_config = {
> > +static const struct regmap_config hmc5843_i2c_regmap_config = {
> > .reg_bits = 8,
> > .val_bits = 8,
> >
> > diff --git a/drivers/staging/iio/magnetometer/hmc5843_spi.c b/drivers/staging/iio/magnetometer/hmc5843_spi.c
> > index 98c4b57101c9..8e658f736e1f 100644
> > --- a/drivers/staging/iio/magnetometer/hmc5843_spi.c
> > +++ b/drivers/staging/iio/magnetometer/hmc5843_spi.c
> > @@ -19,7 +19,7 @@ static const struct regmap_range hmc5843_readable_ranges[] = {
> > regmap_reg_range(0, HMC5843_ID_END),
> > };
> >
> > -static struct regmap_access_table hmc5843_readable_table = {
> > +static const struct regmap_access_table hmc5843_readable_table = {
> > .yes_ranges = hmc5843_readable_ranges,
> > .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges),
> > };
> > @@ -28,7 +28,7 @@ static const struct regmap_range hmc5843_writable_ranges[] = {
> > regmap_reg_range(0, HMC5843_MODE_REG),
> > };
> >
> > -static struct regmap_access_table hmc5843_writable_table = {
> > +static const struct regmap_access_table hmc5843_writable_table = {
> > .yes_ranges = hmc5843_writable_ranges,
> > .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges),
> > };
> > @@ -37,12 +37,12 @@ static const struct regmap_range hmc5843_volatile_ranges[] = {
> > regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG),
> > };
> >
> > -static struct regmap_access_table hmc5843_volatile_table = {
> > +static const struct regmap_access_table hmc5843_volatile_table = {
> > .yes_ranges = hmc5843_volatile_ranges,
> > .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges),
> > };
> >
> > -static struct regmap_config hmc5843_spi_regmap_config = {
> > +static const struct regmap_config hmc5843_spi_regmap_config = {
> > .reg_bits = 8,
> > .val_bits = 8,
> >
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
