On 25/11/14 18:25, Adam Thomson wrote: > Add information on in_current related readings. > > Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx> This one stands on it's own to applied (with some fuzz and tiny bit of rearranging) to the togreg branch of iio.git - initially pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > --- > Documentation/ABI/testing/sysfs-bus-iio | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio > index d760b02..37cd4d4 100644 > --- a/Documentation/ABI/testing/sysfs-bus-iio > +++ b/Documentation/ABI/testing/sysfs-bus-iio > @@ -92,6 +92,18 @@ Description: > is required is a consistent labeling. Units after application > of scale and offset are millivolts. > > +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_raw > +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw > +KernelVersion: 3.17 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Raw (unscaled no bias removal etc.) current measurement from > + channel Y. In special cases where the channel does not > + correspond to externally available input one of the named > + versions may be used. The number must always be specified and > + unique to allow association with event codes. Units after > + application of scale and offset are milliamps. > + > What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw > KernelVersion: 3.2 > Contact: linux-iio@xxxxxxxxxxxxxxx > @@ -227,6 +239,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset > What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset > What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset > What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset > +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_offset > +What: /sys/bus/iio/devices/iio:deviceX/in_current_offset > What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset > What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset > What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset > @@ -249,8 +263,11 @@ Description: > to the _raw output. > > What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale > +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_scale > What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale > +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale > What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale > +What: /sys/bus/iio/devices/iio:deviceX/in_current_scale > What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale > What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale > What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale > -- > 1.9.3 > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
