Re: [PATCH v2 3/4] iio: accel: kxcjk-1013: error handling when set mode fails

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/12/14 16:23, Irina Tirdea wrote:
> If there is an error in set mode at runtime resume, reset the state of
> the runtime usage count.
> 
> If there is an error in set mode at runtime suspend, make sure the framework
> retries to suspend the device.
> 
> Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx>
> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
Applied to the togreg branch of iio.git - to be pushed out as testing later
today.

Thanks,

Jonathan
> ---
>  drivers/iio/accel/kxcjk-1013.c |   13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
> index 7b0a9da..0dc6ccf 100644
> --- a/drivers/iio/accel/kxcjk-1013.c
> +++ b/drivers/iio/accel/kxcjk-1013.c
> @@ -388,6 +388,8 @@ static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on)
>  	if (ret < 0) {
>  		dev_err(&data->client->dev,
>  			"Failed: kxcjk1013_set_power_state for %d\n", on);
> +		if (on)
> +			pm_runtime_put_noidle(&data->client->dev);
>  		return ret;
>  	}
>  #endif
> @@ -859,6 +861,8 @@ static int kxcjk1013_write_event_config(struct iio_dev *indio_dev,
>  
>  	ret =  kxcjk1013_setup_any_motion_interrupt(data, state);
>  	if (ret < 0) {
> +		kxcjk1013_set_power_state(data, false);
> +		data->ev_enable_state = 0;
>  		mutex_unlock(&data->mutex);
>  		return ret;
>  	}
> @@ -1009,6 +1013,7 @@ static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig,
>  	else
>  		ret = kxcjk1013_setup_new_data_interrupt(data, state);
>  	if (ret < 0) {
> +		kxcjk1013_set_power_state(data, false);
>  		mutex_unlock(&data->mutex);
>  		return ret;
>  	}
> @@ -1368,8 +1373,14 @@ static int kxcjk1013_runtime_suspend(struct device *dev)
>  {
>  	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
>  	struct kxcjk1013_data *data = iio_priv(indio_dev);
> +	int ret;
>  
> -	return kxcjk1013_set_mode(data, STANDBY);
> +	ret = kxcjk1013_set_mode(data, STANDBY);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "powering off device failed\n");
> +		return -EAGAIN;
> +	}
> +	return 0;
>  }
>  
>  static int kxcjk1013_runtime_resume(struct device *dev)
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux