Tested it on the Miami board, and this patch indeed fixes the issue. You can
add my tested-by if you like:
Tested-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
On 11/26/2014 11:35 AM, Lars-Peter Clausen wrote:
The ad7991/ad7995/ad7999 does not have a configuration register like the
other devices that can be written and read. The configuration is written as
part of the conversion sequence.
Fixes: 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe and reset alert status on probe")
Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
---
drivers/iio/adc/ad799x.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
index e37412d..b99de00 100644
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -143,9 +143,15 @@ static int ad799x_write_config(struct ad799x_state *st, u16 val)
case ad7998:
return i2c_smbus_write_word_swapped(st->client, AD7998_CONF_REG,
val);
- default:
+ case ad7992:
+ case ad7993:
+ case ad7994:
return i2c_smbus_write_byte_data(st->client, AD7998_CONF_REG,
val);
+ default:
+ /* Will be written when doing a conversion */
+ st->config = val;
+ return 0;
}
}
@@ -155,8 +161,13 @@ static int ad799x_read_config(struct ad799x_state *st)
case ad7997:
case ad7998:
return i2c_smbus_read_word_swapped(st->client, AD7998_CONF_REG);
- default:
+ case ad7992:
+ case ad7993:
+ case ad7994:
return i2c_smbus_read_byte_data(st->client, AD7998_CONF_REG);
+ default:
+ /* No readback support */
+ return st->config;
}
}
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Systems
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: (+31) (0) 499 33 69 79
Telefax: (+31) (0) 499 33 69 70
E-mail: mike.looijmans@xxxxxxxx
Website: www.topic.nl
Please consider the environment before printing this e-mail
Topic zoekt gedreven (embedded) software specialisten!
http://topic.nl/vacatures/topic-zoekt-software-engineers/
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
