On Friday, November 21, 2014 03:11:48 PM Aaron Lu wrote: > v3: > Only some function/variable name changes, no functiona changes: > - Replace the dptf/DPTF word originate from the BIOS ACPI table with more > meaningful word thermal/THERMAL in all places; > - Eliminate the soc part in various structure and function names to make > them shorter: > intel_soc_pmic_opregion -> intel_pmic_opregion > intel_soc_pmic_pmop_handler -> intel_pmic_pmop_handler > intel_soc_pmic_install_opregion_handler -> intel_pmic_install_opregion_handler > etc. > > > v2: > Place PMIC operation files under drivers/acpi/pmic instead of > drivers/acpi/pmic_opregion as suggested by Rafael; > Rename PMIC operation files to make them shorter as suggested by Rafael. > > v1: > On Intel Baytrail-T and Baytrail-T-CR platforms, there are two customized > ACPI operation regions defined for the Power Management Integrated Circuit > device, one is for power resource handling and one is for thermal: sensor > temperature reporting, trip point setting, etc. There are different PMIC > chips used on those platforms and though each has the same two operation > regions and functionality, their implementation is different so every PMIC > will need a driver. But since their functionality is similar, some common > code is abstracted into the intel_soc_pmic_opregion.c. > > The last version is posted here: > https://lkml.org/lkml/2014/9/8/801 > > Changes since then: > 1 Move to drivers/acpi as discussed on the above thread; > 2 Added support for XPower AXP288 PMIC operation region support; > 3 Since operation region handler can not be removed(at the moment at least), > use bool for the two operation region driver configs instead of tristate; > Another reason to do this is that, with Mika's MFD ACPI support patch, all > those MFD cell devices created will have the same modalias as their parent's > so it doesn't make much sense to compile these drivers into modules. > > Patch 1 applies on top of Rafael's pm-next branch, and then patch 2 and > patch 3 needs merge of Lee's mfd/ib-mfd-iio-3.19 branch where the PMIC > driver XPower AXP288 and iio driver axp288_adc is located. > > > Aaron Lu (3): > ACPI / PMIC: support PMIC operation region for CrystalCove > ACPI / PMIC: support PMIC operation region for XPower AXP288 > ACPI / PMIC: AXP288: support virtual GPIO in ACPI table OK I've pulled the Lee's 'mfd/ib-mfd-iio-3.19' branch and applied your updated three on top of that. Please check the bleeding-edge branch of linux-pm.git for the result. -- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center. -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
