> The TI DAC8554 is a quad-channel Digital-to-Analog Converter with an SPI
> interface.
some minor comments below, looks good
> Signed-off-by: Nikolaus Schulz <nikolaus.schulz@xxxxxxxxxxxxxxxxx>
> ---
> drivers/iio/dac/Kconfig | 10 ++
> drivers/iio/dac/Makefile | 1 +
> drivers/iio/dac/ti-dac8554.c | 365 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 376 insertions(+)
> create mode 100644 drivers/iio/dac/ti-dac8554.c
>
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index 2236ea2..1689260 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -181,4 +181,14 @@ config MCP4922
> To compile this driver as a module, choose M here: the module
> will be called mcp4922.
>
> +config TI_DAC8554
> + tristate "TI DAC8554 driver"
> + depends on SPI
> + depends on OF
> + help
> + Say yes here to build the driver for the TI DAC8554.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called ti-dac8554.
> +
> endmenu
> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
> index 52be7e1..b98d79a 100644
> --- a/drivers/iio/dac/Makefile
> +++ b/drivers/iio/dac/Makefile
> @@ -20,3 +20,4 @@ obj-$(CONFIG_MAX517) += max517.o
> obj-$(CONFIG_MAX5821) += max5821.o
> obj-$(CONFIG_MCP4725) += mcp4725.o
> obj-$(CONFIG_MCP4922) += mcp4922.o
> +obj-$(CONFIG_TI_DAC8554) += ti-dac8554.o
> diff --git a/drivers/iio/dac/ti-dac8554.c b/drivers/iio/dac/ti-dac8554.c
> new file mode 100644
> index 0000000..9c135e1
> --- /dev/null
> +++ b/drivers/iio/dac/ti-dac8554.c
> @@ -0,0 +1,365 @@
> +/*
> + * TI DAC8554 Digital to Analog Converter SPI driver
> + *
> + * Copyright (C) 2014 Avionic Design GmbH
> + *
> + * Based on ad5446r_spi.c
> + * Copyright (C) 2010,2011 Analog Devices Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/spi/spi.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/module.h>
> +#include <linux/iio/iio.h>
> +#include <linux/of.h>
> +
> +#define DAC8554_DRIVERNAME "ti-dac8554"
> +#define DAC8554_DAC_CHANNELS 4
> +
> +/* Load commands */
> +#define DAC8554_CMD_STORE_DAC_N 0x0
> +#define DAC8554_CMD_UPDATE_DAC_N 0x1
> +#define DAC8554_CMD_STORE_DAC_N_UPDATE_ALL 0x2
> +#define DAC8554_CMD_UPDATE_BROADCAST 0x3
> +
> +#define DAC8554_BROADCAST_USE_SRDATA 0x2
> +/* Powerdown modes (ORed PD1|PD2 bits) */
> +#define DAC8554_PWRDN_HIZ 0x0
> +#define DAC8554_PWRDN_1K 0x1
> +#define DAC8554_PWRDN_100K 0x2
> +
> +#define DAC8554_PWRDN_TO_SR(mode) (BIT(16) | (mode) << 14)
> +
> +/**
> + * struct dac8554_state - driver instance specific data
> + * @spi: spi_device
> + * @reg: supply regulator
> + * @addr: two-bit chip address
> + * @vref_mv: reference voltage in millivolt
> + * @val DAC/channel data
> + * @powerdown channel powerdown flag
> + * @powerdown_mode channel powerdown mode
> + */
> +struct dac8554_state {
> + struct spi_device *spi;
> + struct regulator *reg;
> + unsigned addr;
> + unsigned vref_mv;
> + u16 val[DAC8554_DAC_CHANNELS];
> + bool powerdown[DAC8554_DAC_CHANNELS];
> + u8 powerdown_mode[DAC8554_DAC_CHANNELS];
> +};
> +
> +static int dac8554_spi_write(struct spi_device *spi,
> + unsigned chip_addr, unsigned cmd,
> + unsigned chan_addr, unsigned val)
> +{
> + u32 data;
> + u8 msg[3];
careful with SPI; data should be ____cacheline_aligned
> +
> + /*
> + * The input shift register is 24 bits wide. The 8 MSB are
> + * control bits, followed by 16 data bits.
> + * The first two bits A1 and A0 address a DAC8554 chip.
> + * The next two are the command bits, LD1 and LD0.
> + * After a don't-care-bit, the next two bits select the channel.
> + * The final control bit PD0 is a flag signalling if the data
> + * bits encode a powerdown mode. We merge PD0 with the adjacent
> + * data bits.
> + */
> +
> + if (chip_addr > 3 || cmd > 3 || chan_addr > 3 ||
> + (val > 0xffff && (val & ~DAC8554_PWRDN_TO_SR(3))))
> + return -EINVAL;
> +
> + data = (chip_addr << 22) | (cmd << 20) | (chan_addr << 17) | val;
> + msg[0] = data >> 16;
> + msg[1] = data >> 8;
> + msg[2] = data;
> +
> + return spi_write(spi, msg, sizeof(msg));
> +}
> +
> +static int dac8554_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val,
> + int *val2,
> + long m)
> +{
> + struct dac8554_state *st = iio_priv(indio_dev);
> +
> + switch (m) {
> + case IIO_CHAN_INFO_RAW:
> + *val = st->val[chan->address];
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + *val = st->vref_mv;
> + *val2 = 16;
> + return IIO_VAL_FRACTIONAL_LOG2;
> + }
> + return -EINVAL;
> +}
> +
> +static int dac8554_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val,
> + int val2,
> + long mask)
> +{
> + struct dac8554_state *st = iio_priv(indio_dev);
> + int err = 0;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + if (val > 0xffff || val < 0)
> + return -EINVAL;
> +
> + err = dac8554_spi_write(st->spi, st->addr,
> + DAC8554_CMD_UPDATE_DAC_N,
> + chan->address, val);
> + if (err)
> + return err;
> +
> + st->val[chan->address] = val;
> +
> + /* By hw design, DAC updates automatically trigger powerup. */
> + st->powerdown[chan->address] = false;
> +
> + return 0;
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int dac8554_get_powerdown_mode(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan)
> +{
> + struct dac8554_state *st = iio_priv(indio_dev);
> +
> + return st->powerdown_mode[chan->address];
> +}
> +
> +static int dac8554_set_powerdown_mode(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + unsigned int mode)
> +{
> + struct dac8554_state *st = iio_priv(indio_dev);
> +
> + st->powerdown_mode[chan->address] = mode;
> +
> + return 0;
> +}
> +
> +static ssize_t dac8554_read_dac_powerdown(struct iio_dev *indio_dev,
> + uintptr_t private,
> + const struct iio_chan_spec *chan,
> + char *buf)
> +{
> + struct dac8554_state *st = iio_priv(indio_dev);
> +
> + return sprintf(buf, "%d\n", st->powerdown[chan->address]);
> +}
> +
> +static ssize_t dac8554_write_dac_powerdown(struct iio_dev *indio_dev,
> + uintptr_t private,
> + const struct iio_chan_spec *chan,
> + const char *buf,
> + size_t len)
> +{
> + bool powerdown;
> + int ret;
> + struct dac8554_state *st = iio_priv(indio_dev);
> + u8 powerdown_mode;
> +
> + ret = strtobool(buf, &powerdown);
> + if (ret)
> + return ret;
> +
> + st->powerdown[chan->address] = powerdown;
> +
> + if (powerdown) {
> + powerdown_mode = st->powerdown_mode[chan->address];
> + ret = dac8554_spi_write(st->spi, st->addr,
> + DAC8554_CMD_UPDATE_DAC_N,
> + chan->address,
> + DAC8554_PWRDN_TO_SR(powerdown_mode));
> + } else {
> + /* Load DAC with cached value. This triggers a powerup. */
> + ret = dac8554_spi_write(st->spi, st->addr,
> + DAC8554_CMD_UPDATE_DAC_N,
> + chan->address,
> + st->val[chan->address]);
> + }
> +
> + if (ret)
> + return ret;
> +
> + return len;
> +}
> +
> +static int dac8554_powerdown_broadcast(struct dac8554_state *st,
> + u8 powerdown_mode)
> +{
> + int ret;
> +
> + ret = dac8554_spi_write(st->spi, 0,
> + DAC8554_CMD_UPDATE_BROADCAST,
> + DAC8554_BROADCAST_USE_SRDATA,
> + DAC8554_PWRDN_TO_SR(powerdown_mode));
> + if (ret)
> + return ret;
> +
> + memset(st->powerdown_mode, powerdown_mode, sizeof(st->powerdown_mode));
> + memset(st->powerdown, true, sizeof(st->powerdown));
> +
> + return 0;
> +}
> +
> +static const struct iio_info dac8554_info = {
> + .write_raw = dac8554_write_raw,
> + .read_raw = dac8554_read_raw,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static const char * const dac8554_powerdown_modes[] = {
> + "hi-z",
hi-z is (not yet) described in ABI/testing/sysfs-bus-iio, you should add
that
> + "1kohm_to_gnd",
> + "100kohm_to_gnd"
> +};
> +
> +static const struct iio_enum dac8854_powerdown_mode_enum = {
> + .items = dac8554_powerdown_modes,
> + .num_items = ARRAY_SIZE(dac8554_powerdown_modes),
> + .get = dac8554_get_powerdown_mode,
> + .set = dac8554_set_powerdown_mode,
> +};
> +
> +static const struct iio_chan_spec_ext_info dac8554_ext_info[] = {
> + {
> + .name = "powerdown",
> + .read = dac8554_read_dac_powerdown,
> + .write = dac8554_write_dac_powerdown,
> + .shared = IIO_SEPARATE,
> + },
> + IIO_ENUM("powerdown_mode", IIO_SEPARATE,
> + &dac8854_powerdown_mode_enum),
> + IIO_ENUM_AVAILABLE("powerdown_mode", &dac8854_powerdown_mode_enum),
> + { },
> +};
> +
> +#define DAC8554_CHANNEL(chan) { \
> + .type = IIO_VOLTAGE, \
> + .indexed = 1, \
> + .output = 1, \
> + .channel = (chan), \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> + .address = (chan), \
> + .ext_info = dac8554_ext_info, \
> +}
> +const struct iio_chan_spec dac8554_channels[] = {
> + DAC8554_CHANNEL(0),
> + DAC8554_CHANNEL(1),
> + DAC8554_CHANNEL(2),
> + DAC8554_CHANNEL(3),
> +};
> +#undef DAC8554_CHANNEL
nothing wrong, but this would be the first IIO driver to #undef its
channel macro
> +
> +static int dac8554_probe(struct spi_device *spi)
> +{
> + struct dac8554_state *st;
> + struct iio_dev *indio_dev;
> + int ret, voltage_uv = 0;
> + u32 addr;
> +
> + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + indio_dev->dev.parent = &spi->dev;
> + indio_dev->name = DAC8554_DRIVERNAME;
> + indio_dev->info = &dac8554_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->channels = dac8554_channels;
> + indio_dev->num_channels = ARRAY_SIZE(dac8554_channels);
> +
> + spi_set_drvdata(spi, indio_dev);
> + ret = iio_device_register(indio_dev);
iio_device_register() should probably be the last thing in _probe();
_state should be fully set up so requests can be handled
> + if (ret)
> + return ret;
> +
> + st = iio_priv(indio_dev);
> +
> + if (!spi->dev.of_node) {
> + dev_err(&spi->dev, "missing OF node");
> + return -ENODEV;
> + }
> + ret = of_property_read_u32(spi->dev.of_node, "address", &addr);
> + if (ret || addr > 2) {
addr < 0?
> + dev_err(&spi->dev, "no or invalid chip address");
> + return -ENODEV;
> + }
> +
> + st->spi = spi;
> + st->addr = addr;
> +
> + st->reg = devm_regulator_get(&spi->dev, "vref");
> + if (IS_ERR(st->reg))
> + return PTR_ERR(st->reg);
> +
> + ret = regulator_enable(st->reg);
> + if (ret)
> + return ret;
> +
> + voltage_uv = regulator_get_voltage(st->reg);
> + if (voltage_uv < 0)
> + goto error_disable_reg;
> + st->vref_mv = voltage_uv / 1000;
> +
> + ret = dac8554_powerdown_broadcast(st, DAC8554_PWRDN_100K);
> + if (ret)
> + goto error_disable_reg;
> +
> + return 0;
> +
> +error_disable_reg:
> + regulator_disable(st->reg);
> + return ret;
> +}
> +
> +static int dac8554_remove(struct spi_device *spi)
> +{
> + struct iio_dev *indio_dev = spi_get_drvdata(spi);
> + struct dac8554_state *st = iio_priv(indio_dev);
> +
> + iio_device_unregister(indio_dev);
probably a powerdown?
> + regulator_disable(st->reg);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id dac8554_of_match[] = {
> + { .compatible = "ti,dac8554" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, dac8554_of_match);
> +
> +static struct spi_driver dac8554_driver = {
> + .driver = {
> + .name = DAC8554_DRIVERNAME,
> + .owner = THIS_MODULE,
> + .of_match_table = dac8554_of_match,
> + },
> + .probe = dac8554_probe,
> + .remove = dac8554_remove,
> +};
> +module_spi_driver(dac8554_driver);
> +
> +MODULE_AUTHOR("Nikolaus Schulz <nikolaus.schulz@xxxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Texas Instruments DAC8554 SPI driver");
> +MODULE_LICENSE("GPL v2");
>
--
Peter Meerwald
+43-664-2444418 (mobile)
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
