In one shot mode, sequencer automatically disables all enabled steps at the end of each cycle. (both ADC steps and TSC steps) Hence these steps need not be saved in reg_se_cache for clearing these steps at a later stage. Also, when ADC wakes up Sequencer should not be busy executing any of the config steps except for the charge step. Previously charge step was 1 ADC clock cycle and hence it was ignored. Signed-off-by: Vignesh R <vigneshr@xxxxxx> --- drivers/mfd/ti_am335x_tscadc.c | 7 +++++-- include/linux/mfd/ti_am335x_tscadc.h | 1 + 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index d877e777cce6..94ef8992f46b 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -86,8 +86,12 @@ static void am335x_tscadc_need_adc(struct ti_tscadc_dev *tsadc) spin_lock_irq(&tsadc->reg_lock); finish_wait(&tsadc->reg_se_wait, &wait); + /* + * Sequencer should either be idle or + * busy applying the charge step. + */ reg = tscadc_readl(tsadc, REG_ADCFSM); - WARN_ON(reg & SEQ_STATUS); + WARN_ON(reg & SEQ_STATUS & (!CHARGE_STEP)); tsadc->adc_waiting = false; } tsadc->adc_in_use = true; @@ -96,7 +100,6 @@ static void am335x_tscadc_need_adc(struct ti_tscadc_dev *tsadc) void am335x_tsc_se_set_once(struct ti_tscadc_dev *tsadc, u32 val) { spin_lock_irq(&tsadc->reg_lock); - tsadc->reg_se_cache |= val; am335x_tscadc_need_adc(tsadc); tscadc_writel(tsadc, REG_SE, val); diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index c99be5dc0f5c..fcce182e4a35 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -128,6 +128,7 @@ /* Sequencer Status */ #define SEQ_STATUS BIT(5) +#define CHARGE_STEP 0x11 #define ADC_CLK 3000000 #define TOTAL_STEPS 16 -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html