On 25/10/14 18:34, Hartmut Knaack wrote:
> Jonathan Cameron schrieb am 25.10.2014 12:02:
>> On 18/10/14 20:46, Hartmut Knaack wrote:
>>> In si7020_read_raw() the pointer to the i2c client was obtained as second level pointer, although a simple pointer would be sufficient. Cleaned this.
>>> When reading temperature or humidity values, a right-shift of two bits needs to be applied, and only for the humidity channel a mask of the lower 12 bits needs to be applied. This reduces code repetition.
>>> During probe, i2c_set_clientdata() was used, although its counterpart was not, so drop it.
>>>
>>> Signed-off-by: Hartmut Knaack <knaack.h@xxxxxx>
>> I think the incorrect pointer is a bug (rather than simply unnecessary).
> Could you give me some infos, why you assess this issue as a bug?
Fair point. It's a bug with no effect whatsoever.
I didn't really follow that through other than going
"Gah it has the wrong type, we'll dereference it once too many and it will
eat babies!"
Clearly it just gets passed on wards thus two bugs cancel each other out.
>> The other stuff is a cleanup (sensible but not stable material).
>>
>> Please split the patch into two.
> No problem at all.
I'll probably just take them both through togreg anyway so would have
been fine in the first place. Sorry about that.
J
>>
>> Thanks,
>>
>> Jonathan
>>> ---
>>> diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
>>> index e336af7..b541646 100644
>>> --- a/drivers/iio/humidity/si7020.c
>>> +++ b/drivers/iio/humidity/si7020.c
>>> @@ -45,21 +45,20 @@ static int si7020_read_raw(struct iio_dev *indio_dev,
>>> struct iio_chan_spec const *chan, int *val,
>>> int *val2, long mask)
>>> {
>>> - struct i2c_client **client = iio_priv(indio_dev);
>>> + struct i2c_client *client = iio_priv(indio_dev);
>>> int ret;
>>>
>>> switch (mask) {
>>> case IIO_CHAN_INFO_RAW:
>>> - ret = i2c_smbus_read_word_data(*client,
>>> + ret = i2c_smbus_read_word_data(client,
>>> chan->type == IIO_TEMP ?
>>> SI7020CMD_TEMP_HOLD :
>>> SI7020CMD_RH_HOLD);
>>> if (ret < 0)
>>> return ret;
>>> - if (chan->type == IIO_TEMP)
>>> - *val = ret >> 2;
>>> - else
>>> - *val = (ret & 0x3FFF) >> 2;
>>> + *val = ret >> 2;
>>> + if (chan->type == IIO_HUMIDITYRELATIVE)
>>> + *val &= GENMASK(11, 0);
>>> return IIO_VAL_INT;
>>> case IIO_CHAN_INFO_SCALE:
>>> if (chan->type == IIO_TEMP)
>>> @@ -133,7 +132,6 @@ static int si7020_probe(struct i2c_client *client,
>>>
>>> data = iio_priv(indio_dev);
>>> *data = client;
>>> - i2c_set_clientdata(client, indio_dev);
>>>
>>> indio_dev->dev.parent = &client->dev;
>>> indio_dev->name = dev_name(&client->dev);
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
