Re: [PATCH 1/3] iio:kxcjk-1013: Correct error messages

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 20/07/14 17:51, Jonathan Cameron wrote:
> On 14/07/14 23:58, Srinivas Pandruvada wrote:
>> On 07/14/2014 01:38 PM, Peter Meerwald wrote:
>>> Signed-off-by: Peter Meerwald <pmeerw@xxxxxxxxxx>
>>> Cc: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
> This one doesn't apply cleanly on top of Srinivas' patches that I took
> earlier today.  I'll hold it for now as it's not as urgent as the next
> one and sort it out after Srinivas' series is all in place.
> 
No longer relevant as far as I can see so dropped.
> J
>>> ---
>>>   drivers/iio/accel/kxcjk-1013.c | 6 +++---
>>>   1 file changed, 3 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
>>> index 72a6dbb..a11588c 100644
>>> --- a/drivers/iio/accel/kxcjk-1013.c
>>> +++ b/drivers/iio/accel/kxcjk-1013.c
>>> @@ -144,7 +144,7 @@ static int kxcjk1013_chip_ack_intr(struct kxcjk1013_data *data)
>>>
>>>       ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL);
>>>       if (ret < 0) {
>>> -        dev_err(&data->client->dev, "Error writing reg_int_rel\n");
>>> +        dev_err(&data->client->dev, "Error reading reg_int_rel\n");
>>>           return ret;
>>>       }
>>>
>>> @@ -183,7 +183,7 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
>>>       ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL1,
>>>                       ret);
>>>       if (ret < 0) {
>>> -        dev_err(&data->client->dev, "Error reading reg_ctrl\n");
>>> +        dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
>>>           return ret;
>>>       }
>>>
>>> @@ -337,7 +337,7 @@ static int kxcjk1013_get_acc_reg(struct kxcjk1013_data *data, int axis)
>>>       ret = i2c_smbus_read_word_data(data->client, reg);
>>>       if (ret < 0) {
>>>           dev_err(&data->client->dev,
>>> -            "failed to read accel_%c registers\n", 'x' + axis);
>>> +            "failed to read accel_%c register\n", 'x' + axis);
>>>           return ret;
>>>       }
>>>
>>>
>> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
>>
> 
> -- 
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux