Re: [PATCH v2 08/11] iio:bma180: Introduce part-specific _config() and disable() code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14/09/14 20:20, Jonathan Cameron wrote:
> On 19/08/14 23:43, Peter Meerwald wrote:
>> move part of bma180_init() to bma180_config() (split initialization and
>> configuration code); configuration is heavily chip-specific
>>
>> Signed-off-by: Peter Meerwald <pmeerw@xxxxxxxxxx>
>> Cc: Oleksandr Kravchenko <o.v.kravchenko@xxxxxxxxxxxxxxx>
> applied
Actually - minor fixlet in here as well.
>> ---
>>  drivers/iio/accel/bma180.c | 31 +++++++++++++++++++++----------
>>  1 file changed, 21 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
>> index fc7c7b8..a25b060 100644
>> --- a/drivers/iio/accel/bma180.c
>> +++ b/drivers/iio/accel/bma180.c
>> @@ -37,6 +37,8 @@ struct bma180_part_info {
>>  	unsigned num_scales;
>>  	const int *bw_table;
>>  	unsigned num_bw;
>> +	int (*chip_config)(struct bma180_data *data);
>> +	void (*chip_disable)(struct bma180_data *data);
struct bma180_data hasn't been defined yet.  I've added a forward definition above this
to fix that up rather that reordering the rest of the file.

Jonathan
>>  };
>>  
>>  /* Register set */
>> @@ -279,21 +281,28 @@ static int bma180_chip_init(struct bma180_data *data)
>>  	int ret = i2c_smbus_read_byte_data(data->client, BMA180_CHIP_ID);
>>  
>>  	if (ret < 0)
>> -		goto err;
>> -	if (ret != BMA180_ID_REG_VAL) {
>> -		ret = -ENODEV;
>> -		goto err;
>> -	}
>> +		return ret;
>> +	if (ret != BMA180_ID_REG_VAL)
>> +		return -ENODEV;
>>  
>>  	ret = bma180_soft_reset(data);
>>  	if (ret)
>> -		goto err;
>> +		return ret;
>>  	/*
>>  	 * No serial transaction should occur within minimum 10 us
>>  	 * after soft_reset command
>>  	 */
>>  	msleep(20);
>>  
>> +	return 0;
>> +}
>> +
>> +static int bma180_chip_config(struct bma180_data *data)
>> +{
>> +	int ret = bma180_chip_init(data);
>> +
>> +	if (ret)
>> +		goto err;
>>  	ret = bma180_set_bits(data, BMA180_CTRL_REG0, BMA180_DIS_WAKE_UP, 1);
>>  	if (ret)
>>  		goto err;
>> @@ -319,7 +328,7 @@ static int bma180_chip_init(struct bma180_data *data)
>>  	return 0;
>>  
>>  err:
>> -	dev_err(&data->client->dev, "failed to init the chip\n");
>> +	dev_err(&data->client->dev, "failed to config the chip\n");
>>  	return ret;
>>  }
>>  
>> @@ -507,6 +516,8 @@ static const struct bma180_part_info bma180_part_info[] = {
>>  		bma180_channels, ARRAY_SIZE(bma180_channels),
>>  		bma180_scale_table, ARRAY_SIZE(bma180_scale_table),
>>  		bma180_bw_table, ARRAY_SIZE(bma180_bw_table),
>> +		bma180_chip_config,
>> +		bma180_chip_disable,
>>  	},
>>  };
>>  
>> @@ -578,7 +589,7 @@ static int bma180_probe(struct i2c_client *client,
>>  	data->client = client;
>>  	data->part_info = &bma180_part_info[id->driver_data];
>>  
>> -	ret = bma180_chip_init(data);
>> +	ret = data->part_info->chip_config(data);
>>  	if (ret < 0)
>>  		goto err_chip_disable;
>>  
>> @@ -640,7 +651,7 @@ err_trigger_unregister:
>>  err_trigger_free:
>>  	iio_trigger_free(data->trig);
>>  err_chip_disable:
>> -	bma180_chip_disable(data);
>> +	data->part_info->chip_disable(data);
>>  
>>  	return ret;
>>  }
>> @@ -658,7 +669,7 @@ static int bma180_remove(struct i2c_client *client)
>>  	}
>>  
>>  	mutex_lock(&data->mutex);
>> -	bma180_chip_disable(data);
>> +	data->part_info->chip_disable(data);
>>  	mutex_unlock(&data->mutex);
>>  
>>  	return 0;
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux