Re: [PATCH v2 07/11] iio:bma180: Introduce part_info to differentiate further chip variants

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/08/14 23:43, Peter Meerwald wrote:
> Signed-off-by: Peter Meerwald <pmeerw@xxxxxxxxxx>
> Cc: Oleksandr Kravchenko <o.v.kravchenko@xxxxxxxxxxxxxxx>
applied
> ---
>  drivers/iio/accel/bma180.c | 41 ++++++++++++++++++++++++++++++++---------
>  1 file changed, 32 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
> index 5838318..fc7c7b8 100644
> --- a/drivers/iio/accel/bma180.c
> +++ b/drivers/iio/accel/bma180.c
> @@ -26,6 +26,19 @@
>  #define BMA180_DRV_NAME "bma180"
>  #define BMA180_IRQ_NAME "bma180_event"
>  
> +enum {
> +	BMA180,
> +};
> +
> +struct bma180_part_info {
> +	const struct iio_chan_spec *channels;
> +	unsigned num_channels;
> +	const int *scale_table;
> +	unsigned num_scales;
> +	const int *bw_table;
> +	unsigned num_bw;
> +};
> +
>  /* Register set */
>  #define BMA180_CHIP_ID		0x00 /* Need to distinguish BMA180 from other */
>  #define BMA180_ACC_X_LSB	0x02 /* First of 6 registers of accel data */
> @@ -77,6 +90,7 @@
>  struct bma180_data {
>  	struct i2c_client *client;
>  	struct iio_trigger *trig;
> +	const struct bma180_part_info *part_info;
>  	struct mutex mutex;
>  	bool sleep_state;
>  	int scale;
> @@ -193,8 +207,8 @@ static int bma180_set_bw(struct bma180_data *data, int val)
>  	if (data->sleep_state)
>  		return -EBUSY;
>  
> -	for (i = 0; i < ARRAY_SIZE(bma180_bw_table); ++i) {
> -		if (bma180_bw_table[i] == val) {
> +	for (i = 0; i < data->part_info->num_bw; ++i) {
> +		if (data->part_info->bw_table[i] == val) {
>  			ret = bma180_set_bits(data,
>  					BMA180_BW_TCS, BMA180_BW, i);
>  			if (ret) {
> @@ -217,8 +231,8 @@ static int bma180_set_scale(struct bma180_data *data, int val)
>  	if (data->sleep_state)
>  		return -EBUSY;
>  
> -	for (i = 0; i < ARRAY_SIZE(bma180_scale_table); ++i)
> -		if (bma180_scale_table[i] == val) {
> +	for (i = 0; i < data->part_info->num_scales; ++i)
> +		if (data->part_info->scale_table[i] == val) {
>  			ret = bma180_set_bits(data,
>  					BMA180_OFFSET_LSB1, BMA180_RANGE, i);
>  			if (ret) {
> @@ -488,6 +502,14 @@ static const struct iio_chan_spec bma180_channels[] = {
>  	IIO_CHAN_SOFT_TIMESTAMP(4),
>  };
>  
> +static const struct bma180_part_info bma180_part_info[] = {
> +	[BMA180] = {
> +		bma180_channels, ARRAY_SIZE(bma180_channels),
> +		bma180_scale_table, ARRAY_SIZE(bma180_scale_table),
> +		bma180_bw_table, ARRAY_SIZE(bma180_bw_table),
> +	},
> +};
> +
>  static irqreturn_t bma180_trigger_handler(int irq, void *p)
>  {
>  	struct iio_poll_func *pf = p;
> @@ -554,6 +576,7 @@ static int bma180_probe(struct i2c_client *client,
>  	data = iio_priv(indio_dev);
>  	i2c_set_clientdata(client, indio_dev);
>  	data->client = client;
> +	data->part_info = &bma180_part_info[id->driver_data];
>  
>  	ret = bma180_chip_init(data);
>  	if (ret < 0)
> @@ -562,8 +585,8 @@ static int bma180_probe(struct i2c_client *client,
>  	mutex_init(&data->mutex);
>  
>  	indio_dev->dev.parent = &client->dev;
> -	indio_dev->channels = bma180_channels;
> -	indio_dev->num_channels = ARRAY_SIZE(bma180_channels);
> +	indio_dev->channels = data->part_info->channels;
> +	indio_dev->num_channels = data->part_info->num_channels;
>  	indio_dev->name = BMA180_DRV_NAME;
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  	indio_dev->info = &bma180_info;
> @@ -674,8 +697,8 @@ static SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume);
>  #define BMA180_PM_OPS NULL
>  #endif
>  
> -static struct i2c_device_id bma180_id[] = {
> -	{ BMA180_DRV_NAME, 0 },
> +static struct i2c_device_id bma180_ids[] = {
> +	{ BMA180_DRV_NAME, BMA180 },
>  	{ }
>  };
>  
> @@ -689,7 +712,7 @@ static struct i2c_driver bma180_driver = {
>  	},
>  	.probe		= bma180_probe,
>  	.remove		= bma180_remove,
> -	.id_table	= bma180_id,
> +	.id_table	= bma180_ids,
>  };
>  
>  module_i2c_driver(bma180_driver);
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux