Re: [PATCH] iio: adc: rockchip_saradc: add support for rk3066-tsadc variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/09/14 11:13, Heiko Stübner wrote:
> Am Mittwoch, 3. September 2014, 00:20:58 schrieb Hartmut Knaack:
>> Heiko Stübner schrieb:
>>> Older Rockchip SoCs, at least the rk3066, used a slightly modified saradc
>>> for temperature measurements. This so called tsadc does not contain any
>>> active parts like temperature interrupts and only supports polling the
>>> current temperature. The returned voltage can then be converted by a
>>> suitable thermal driver to and actual temperature and used for thermal
>>> handling.
>>>
>>> Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
>>> ---
>>
>> Looks mostly good to me, just some minor style issues inline.
>>
>>> This is a different IP than the rk3288-tsadc Ceasar provided a driver for.
>>> As the commit messages states, the one used on the rk3066 is just a
>>> saradc,
>>> while the new tsadc in the rk3288 contains active components for thermal
>>> handling.
>>>
>>> A working example using the pending iio-thermal driver can found on
>>> https://github.com/mmind/linux-rockchip/commit/c07e02f069d9677d489f2541766
>>> 19fae36f2aad0> 
>>>  .../bindings/iio/adc/rockchip-saradc.txt           |  2 +-
>>>  drivers/iio/adc/rockchip_saradc.c                  | 62
>>>  +++++++++++++++++----- 2 files changed, 50 insertions(+), 14
>>>  deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
>>> b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt index
>>> 5d3ec1d..a9a5fe1 100644
>>> --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
>>> +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
>>> @@ -1,7 +1,7 @@
>>>
>>>  Rockchip Successive Approximation Register (SAR) A/D Converter bindings
>>>
>>>  Required properties:
>>> -- compatible: Should be "rockchip,saradc"
>>> +- compatible: Should be "rockchip,saradc" or "rockchip,rk3066-tsadc"
>>>
>>>  - reg: physical base address of the controller and length of memory
>>>  mapped
>>>  
>>>         region.
>>>  
>>>  - interrupts: The interrupt number to the cpu. The interrupt specifier
>>>  format> 
>>> diff --git a/drivers/iio/adc/rockchip_saradc.c
>>> b/drivers/iio/adc/rockchip_saradc.c index e074a0b..7effada 100644
>>> --- a/drivers/iio/adc/rockchip_saradc.c
>>> +++ b/drivers/iio/adc/rockchip_saradc.c
>>> @@ -18,13 +18,13 @@
>>>
>>>  #include <linux/interrupt.h>
>>>  #include <linux/io.h>
>>>  #include <linux/of.h>
>>>
>>> +#include <linux/of_device.h>
>>>
>>>  #include <linux/clk.h>
>>>  #include <linux/completion.h>
>>>  #include <linux/regulator/consumer.h>
>>>  #include <linux/iio/iio.h>
>>>  
>>>  #define SARADC_DATA			0x00
>>>
>>> -#define SARADC_DATA_MASK		0x3ff
>>>
>>>  #define SARADC_STAS			0x04
>>>  #define SARADC_STAS_BUSY		BIT(0)
>>>
>>> @@ -38,15 +38,22 @@
>>>
>>>  #define SARADC_DLY_PU_SOC		0x0c
>>>  #define SARADC_DLY_PU_SOC_MASK		0x3f
>>>
>>> -#define SARADC_BITS			10
>>>
>>>  #define SARADC_TIMEOUT			msecs_to_jiffies(100)
>>>
>>> +struct rockchip_saradc_data {
>>> +	int				num_bits;
>>> +	const struct iio_chan_spec	*channels;
>>> +	int				num_channels;
>>> +	unsigned long			clk_rate;
>>> +};
>>> +
>>>
>>>  struct rockchip_saradc {
>>>  
>>>  	void __iomem		*regs;
>>>  	struct clk		*pclk;
>>>  	struct clk		*clk;
>>>  	struct completion	completion;
>>>  	struct regulator	*vref;
>>>
>>> +	const struct rockchip_saradc_data *data;
>>>
>>>  	u16			last_val;
>>>  
>>>  };
>>
>> The alignment of the whole block should be adjusted to fit with the new
>> element.
> 
> Hmm, I'm not sure if this should be in this patch, as changing the indentation 
> is more or less an unrelated change which makes recognizing the actual change 
> of adding the data field harder to see. 
> 
> It could be a second patch on top to adapt the formating, but this also sounds 
> a bit like overkill.
> 
> In any case I guess I'll wait for Jonathan to decide how he likes this to be 
> approached.
> 
Personally I hate this sort of careful block alignment for structures precisely because
it generates churn.  I just don't hate it enough to moan about it in reviews :)

Definitely doesn't want to be in this patch, but feel free to submit another
either tidying up or dropping it in favour of not bothering to align it.


> 
>>> @@ -90,7 +97,7 @@ static int rockchip_saradc_read_raw(struct iio_dev
>>> *indio_dev,> 
>>>  		}
>>>  		
>>>  		*val = ret / 1000;
>>>
>>> -		*val2 = SARADC_BITS;
>>> +		*val2 = info->data->num_bits;
>>>
>>>  		return IIO_VAL_FRACTIONAL_LOG2;
>>>  	
>>>  	default:
>>>  		return -EINVAL;
>>>
>>> @@ -103,7 +110,7 @@ static irqreturn_t rockchip_saradc_isr(int irq, void
>>> *dev_id)> 
>>>  	/* Read value */
>>>  	info->last_val = readl_relaxed(info->regs + SARADC_DATA);
>>>
>>> -	info->last_val &= SARADC_DATA_MASK;
>>> +	info->last_val &= BIT(info->data->num_bits) - 1;
>>
>> I think using GENMASK would reflect the intention better, that you want to
>> mask out your data.
> 
> I didn't know GENMASK before, so thanks for the pointer .. this looks quite 
> cool :-)
> 
> 
>>>  	/* Clear irq & power down adc */
>>>  	writel_relaxed(0, info->regs + SARADC_CTRL);
>>>
>>> @@ -133,12 +140,44 @@ static const struct iio_chan_spec
>>> rockchip_saradc_iio_channels[] = {> 
>>>  	ADC_CHANNEL(2, "adc2"),
>>>  
>>>  };
>>>
>>> +static const struct rockchip_saradc_data saradc_data = {
>>> +	.num_bits = 10,
>>> +	.channels = rockchip_saradc_iio_channels,
>>> +	.num_channels = ARRAY_SIZE(rockchip_saradc_iio_channels),
>>> +	.clk_rate = 1000000,
>>> +};
>>> +
>>> +static const struct iio_chan_spec rockchip_rk3066_tsadc_iio_channels[] =
>>> {
>>> +	ADC_CHANNEL(0, "adc0"),
>>> +	ADC_CHANNEL(1, "adc1"),
>>> +};
>>> +
>>> +static const struct rockchip_saradc_data rk3066_tsadc_data = {
>>> +	.num_bits = 12,
>>> +	.channels = rockchip_rk3066_tsadc_iio_channels,
>>> +	.num_channels = ARRAY_SIZE(rockchip_rk3066_tsadc_iio_channels),
>>> +	.clk_rate = 50000,
>>> +};
>>> +
>>> +static const struct of_device_id rockchip_saradc_match[] = {
>>> +	{
>>> +		.compatible = "rockchip,saradc",
>>> +		.data = &saradc_data,
>>> +	}, {
>>> +		.compatible = "rockchip,rk3066-tsadc",
>>> +		.data = &rk3066_tsadc_data,
>>> +	},
>>> +	{},
>>> +};
>>> +MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
>>> +
>>>
>>>  static int rockchip_saradc_probe(struct platform_device *pdev)
>>>  {
>>>  
>>>  	struct rockchip_saradc *info = NULL;
>>>  	struct device_node *np = pdev->dev.of_node;
>>>  	struct iio_dev *indio_dev = NULL;
>>>  	struct resource	*mem;
>>>
>>> +	const struct of_device_id *match;
>>>
>>>  	int ret;
>>>  	int irq;
>>>
>>> @@ -152,6 +191,9 @@ static int rockchip_saradc_probe(struct
>>> platform_device *pdev)> 
>>>  	}
>>>  	info = iio_priv(indio_dev);
>>>
>>> +	match = of_match_device(rockchip_saradc_match, &pdev->dev);
>>> +	info->data = match->data;
>>> +
>>>
>>>  	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>  	info->regs = devm_ioremap_resource(&pdev->dev, mem);
>>>  	if (IS_ERR(info->regs))
>>>
>>> @@ -195,7 +237,7 @@ static int rockchip_saradc_probe(struct
>>> platform_device *pdev)> 
>>>  	 * Use a default of 1MHz for the converter clock.
>>>  	 * This may become user-configurable in the future.
>>>  	 */
>>>
>>> -	ret = clk_set_rate(info->clk, 1000000);
>>> +	ret = clk_set_rate(info->clk, info->data->clk_rate);
>>>
>>>  	if (ret < 0) {
>>>  	
>>>  		dev_err(&pdev->dev, "failed to set adc clk rate, %d\n", ret);
>>>  		return ret;
>>>
>>> @@ -227,8 +269,8 @@ static int rockchip_saradc_probe(struct
>>> platform_device *pdev)> 
>>>  	indio_dev->info = &rockchip_saradc_iio_info;
>>>  	indio_dev->modes = INDIO_DIRECT_MODE;
>>>
>>> -	indio_dev->channels = rockchip_saradc_iio_channels;
>>> -	indio_dev->num_channels = ARRAY_SIZE(rockchip_saradc_iio_channels);
>>> +	indio_dev->channels = info->data->channels;
>>> +	indio_dev->num_channels = info->data->num_channels;
>>>
>>>  	ret = iio_device_register(indio_dev);
>>>  	if (ret)
>>>
>>> @@ -296,12 +338,6 @@ static int rockchip_saradc_resume(struct device *dev)
>>>
>>>  static SIMPLE_DEV_PM_OPS(rockchip_saradc_pm_ops,
>>>  
>>>  			 rockchip_saradc_suspend, rockchip_saradc_resume);
>>>
>>> -static const struct of_device_id rockchip_saradc_match[] = {
>>> -	{ .compatible = "rockchip,saradc" },
>>> -	{},
>>> -};
>>> -MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
>>> -
>>>
>>>  static struct platform_driver rockchip_saradc_driver = {
>>>  
>>>  	.probe		= rockchip_saradc_probe,
>>>  	.remove		= rockchip_saradc_remove,
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux