After enabling and disabling ADC continuous mode via sysfs, ts_print_raw fails to return any data. This is because when ADC is configured for continuous mode, it disables touch screen steps.These steps are not re-enabled when ADC continuous mode is disabled. Therefore existing values of REG_SE needs to be cached before enabling continuous mode and disabling touch screen steps and enabling ADC steps. The cached value are to be restored to REG_SE once ADC is disabled. Fixes: 7ca6740cd1cd ("mfd: input: iio: ti_amm335x: Rework TSC/ADC synchronization") Cc: stable@xxxxxxxxxxxxxxx # v3.13+ Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> Signed-off-by: Vignesh R <vigneshr@xxxxxx> --- fixed $SUBJECT, added stable and ack from Lee Jones. No code change. drivers/mfd/ti_am335x_tscadc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index d4e860413bb5..e3076afe6b3c 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -54,7 +54,7 @@ void am335x_tsc_se_set_cache(struct ti_tscadc_dev *tsadc, u32 val) unsigned long flags; spin_lock_irqsave(&tsadc->reg_lock, flags); - tsadc->reg_se_cache = val; + tsadc->reg_se_cache |= val; if (tsadc->adc_waiting) wake_up(&tsadc->reg_se_wait); else if (!tsadc->adc_in_use) @@ -97,6 +97,7 @@ static void am335x_tscadc_need_adc(struct ti_tscadc_dev *tsadc) void am335x_tsc_se_set_once(struct ti_tscadc_dev *tsadc, u32 val) { spin_lock_irq(&tsadc->reg_lock); + tsadc->reg_se_cache |= val; am335x_tscadc_need_adc(tsadc); tscadc_writel(tsadc, REG_SE, val); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html