On Thursday 28 August 2014 18:11:43 Heiko Stübner wrote: > Am Donnerstag, 28. August 2014, 10:37:35 schrieb Eduardo Valentin: > > > On the driver side, I believe the correct way to deal with this setup > > > is to split your driver into a generic drivers/iio/adc/rockchips-tsadc.c > > > file, and a smaller thermal driver that uses the iio in-kernel interfaces, > > > ideally one that is independent of the underlying hardware and can > > > work on any ADC implementation. > > > > Agreed. If you can write such interface and make your driver to work in > > such way, that would be great. > > But I currently don't see how you would model the temperature handling parts > from a generic thermal driver to a generic adc driver for the rk3288-tsadc. > > I guess the general temperature irq handling would use iio-triggers? But how > does the target temperature get into the TSADC_COMP1_INT register. > > Also when getting the temperature, Caesar's driver compares it to its trip > points and sets the next trip point depending on the current temperature > (passive <-> critical) in rockchip_get_temp. > > Maybe there is some completely easy way for this, but currently I don't see > it. Eduardo earlier today replied to an email about a generic driver for thermal, which was posted in February but hasn't been merged. See https://lkml.org/lkml/2014/2/5/810 There may be a newer version of this patch, which I haven't found. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
