Re: [PATCH 2/2] iio: adc: ti_am335x_adc: make sample delay, open delay, averaging DT parameters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wednesday 27 August 2014 07:26 PM, Lee Jones wrote:
> On Wed, 27 Aug 2014, Vignesh R wrote:
> 
>> Number of averaging, open delay, sample delay are made DT parameters.
>> By decreasing averaging and delays more samples can be obtained per
>> second increasing performance of ADC. Previously the number of
>> averages per step was fixed to 16. Making these parameters
>> configurable will help in balancing speed vs accuracy.
>> For each ADC step provide DT based paramters to set open delay,
>> sample delay and number of averaging. One configurable step is
>> used per ADC channel. Since there can be atmost 8 ADC channels,
>> steps 16 to 8 are used for ADC.
>>
>> Signed-off-by: Vignesh R <vigneshr@xxxxxx>
>> ---
>>  .../bindings/input/touchscreen/ti-tsc-adc.txt      |   18 +++++++
>>  drivers/iio/adc/ti_am335x_adc.c                    |   49 +++++++++++++++++---
>>  include/linux/mfd/ti_am335x_tscadc.h               |    3 ++
>>  3 files changed, 63 insertions(+), 7 deletions(-)
> 
> [...]
> 
>> diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
>> index fb96c84..26d3e84 100644
>> --- a/include/linux/mfd/ti_am335x_tscadc.h
>> +++ b/include/linux/mfd/ti_am335x_tscadc.h
>> @@ -82,14 +82,17 @@
> 
> There are so many different formats at play here, it's difficult to
> see what's happening where!

I did not understand "different formats". Please explain.

> 
>>  #define STEPCONFIG_INP_AN4	STEPCONFIG_INP(4)
>>  #define STEPCONFIG_INP_ADCREFM	STEPCONFIG_INP(8)
>>  #define STEPCONFIG_FIFO1	BIT(26)
>> +#define STEPCONFIG_AVG_MAX	16
>>  
>>  /* Delay register */
>>  #define STEPDELAY_OPEN_MASK	(0x3FFFF << 0)
>>  #define STEPDELAY_OPEN(val)	((val) << 0)
> 
> What's the point in shifting by zero?

I agree. But my patch did not add these lines. I can remove them. Do you
want me to do this change as part of current patch or as a separate
cleanup patch?

> 
>>  #define STEPCONFIG_OPENDLY	STEPDELAY_OPEN(0x098)
>> +#define STEPDELAY_OPEN_MAX	0x3FFFF
> 
> Put this up the top, then you can use it when defining
> STEPDELAY_OPEN_MASK.

Done.

> 
>>  #define STEPDELAY_SAMPLE_MASK	(0xFF << 24)
>>  #define STEPDELAY_SAMPLE(val)	((val) << 24)
>>  #define STEPCONFIG_SAMPLEDLY	STEPDELAY_SAMPLE(0)
>> +#define STEPDELAY_SAMPLE_MAX	0xFF
> 
>>  /* Charge Config */
>>  #define STEPCHARGE_RFP_MASK	(7 << 12)
> 

Regards
Vignesh R
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux