> Minimal implementation. This driver provides raw illuminance readings. > > This is based on drivers/hwmon/al3320.c (*) driver from msm tree written > by Tsechih Lin <Tsechih_Lin@xxxxxxxx> > > * https://android.googlesource.com/kernel/msm.git some more comments on minor things below... > Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxxxx> > --- > Changes since v1: (reported by Peter Meerwald) > * used u8 instead of int for passing gain and mean_time > * used i2c_smbus_read_word_swapped instead of 2 x i2c_smbus_read_byte_data > * used devm_iio_device_register instead of iio_device_register > * small style fixes > > drivers/iio/light/Kconfig | 10 ++ > drivers/iio/light/Makefile | 1 + > drivers/iio/light/al3320a.c | 247 ++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 258 insertions(+) > create mode 100644 drivers/iio/light/al3320a.c > > diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig > index bf05ca5..5bea821 100644 > --- a/drivers/iio/light/Kconfig > +++ b/drivers/iio/light/Kconfig > @@ -17,6 +17,16 @@ config ADJD_S311 > This driver can also be built as a module. If so, the module > will be called adjd_s311. > > +config AL3320A > + tristate "AL3320A ambient light sensor" > + depends on I2C > + help > + Say Y here if you want to build a driver for the Dyna Image AL3320A > + ambient light sensor. > + > + To compile this driver as a module, choose M here: the > + module will be called al3320a. > + > config APDS9300 > tristate "APDS9300 ambient light sensor" > depends on I2C > diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile > index 8b8c09f..47877a3 100644 > --- a/drivers/iio/light/Makefile > +++ b/drivers/iio/light/Makefile > @@ -4,6 +4,7 @@ > > # When adding new entries keep the list in alphabetical order > obj-$(CONFIG_ADJD_S311) += adjd_s311.o > +obj-$(CONFIG_AL3320A) += al3320a.o > obj-$(CONFIG_APDS9300) += apds9300.o > obj-$(CONFIG_CM32181) += cm32181.o > obj-$(CONFIG_CM36651) += cm36651.o > diff --git a/drivers/iio/light/al3320a.c b/drivers/iio/light/al3320a.c > new file mode 100644 > index 0000000..787ce2e > --- /dev/null > +++ b/drivers/iio/light/al3320a.c > @@ -0,0 +1,247 @@ > +/* > + * AL3320A - Dyna Image Ambient Light Sensor > + * > + * Copyright (c) 2014, Intel Corporation. > + * > + * This file is subject to the terms and conditions of version 2 of > + * the GNU General Public License. See the file COPYING in the main > + * directory of this archive for more details. > + * > + * IIO driver for AL3320A (7-bit I2C slave address 0x1C). > + * > + * TODO: interrupt support > + * > + */ > + > +#include <linux/module.h> > +#include <linux/init.h> > +#include <linux/i2c.h> > +#include <linux/mutex.h> mutex is not needed > + > +#include <linux/iio/iio.h> > +#include <linux/iio/sysfs.h> > + > +#define AL3320A_DRV_NAME "al3320a" > + > +#define AL3320A_REG_CONFIG 0x00 > +#define AL3320A_REG_STATUS 0x01 > +#define AL3320A_REG_INT 0x02 > +#define AL3320A_REG_WAIT 0x06 > +#define AL3320A_REG_CONFIG_RANGE 0x07 > +#define AL3320A_REG_PERSIST 0x08 PERSIST is not used, maybe add to TODO > +#define AL3320A_REG_MEAN_TIME 0x09 > +#define AL3320A_REG_ADUMMY 0x0A > +#define AL3320A_REG_DATA_LOW 0x22 > +#define AL3320A_REG_DATA_HIGH 0x23 DATA_HIGH became unused by read_word_swapped() > + > +#define AL3320A_REG_LOW_THRESH_LOW 0x30 > +#define AL3320A_REG_LOW_THRESH_HIGH 0x31 > +#define AL3320A_REG_HIGH_THRESH_LOW 0x32 > +#define AL3320A_REG_HIGH_THRESH_HIGH 0x33 threshold are TODO > + > +#define AL3320A_CONFIG_DISABLE 0x00 > +#define AL3320A_CONFIG_ENABLE BIT(0) > +#define AL3320A_CONFIG_SW_RESET BIT(2) SW_RESET is unused > + > +#define AL3320A_GAIN_SHIFT 1 > + > +/* chip params default values */ > +#define AL3320A_DEFAULT_MEAN_TIME 4 > +#define AL3320A_DEFAULT_WAIT_TIME 0 /* no waiting */ > + > +enum al3320a_range { > + AL3320A_RANGE_1, /* 33.28K lux */ > + AL3320A_RANGE_2, /* 8.32K lux */ > + AL3320A_RANGE_3, /* 2.08K lux */ > + AL3320A_RANGE_4 /* 0.65K lux */ > +}; > + > +static const int al3320a_scales[][2] = { > + {0, 512000}, {0, 128000}, {0, 32000}, {0, 10000} > +}; > + > +struct al3320a_data { > + struct i2c_client *client; > + u8 range; > +}; > + > +static const struct iio_chan_spec al3320a_channels[] = { > + { > + .type = IIO_LIGHT, > + .info_mask_separate = > + BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE), > + } > +}; > + > +static int al3320a_enable(struct al3320a_data *data) > +{ > + return i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG, > + AL3320A_CONFIG_ENABLE); > +} > + > +static int al3320a_disable(struct al3320a_data *data) > +{ > + return i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG, > + AL3320A_CONFIG_DISABLE); > +} > + > +static int al3320a_set_config_range(struct al3320a_data *data, u8 gain) > +{ > + int ret; > + > + ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG_RANGE, > + gain << AL3320A_GAIN_SHIFT); > + if (ret >= 0) > + data->range = gain; > + return ret; > +} > + > +static int al3320a_set_mean_time(struct al3320a_data *data, u8 mean_time) > +{ > + return i2c_smbus_write_byte_data(data->client, AL3320A_REG_MEAN_TIME, > + mean_time); > +} > + > +static int al3320a_set_wait_time(struct al3320a_data *data, u8 wait_time) > +{ > + return i2c_smbus_write_byte_data(data->client, AL3320A_REG_WAIT, > + wait_time); > +} > + > +static int al3320a_get_adc_value(struct al3320a_data *data) > +{ > + return i2c_smbus_read_word_swapped(data->client, AL3320A_REG_DATA_LOW); > +} > + > +static int al3320a_init(struct al3320a_data *data) > +{ > + int ret; > + > + /* power on */ > + ret = al3320a_enable(data); > + if (ret) > + return ret; > + > + ret = al3320a_set_config_range(data, AL3320A_RANGE_3); > + if (ret) > + return ret; > + > + ret = al3320a_set_mean_time(data, AL3320A_DEFAULT_MEAN_TIME); > + if (ret) > + return ret; > + > + ret = al3320a_set_wait_time(data, AL3320A_DEFAULT_WAIT_TIME); > + if (ret) > + return ret; > + > + return 0; > +} > + > +static int al3320a_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, > + int *val2, > + long mask) > +{ > + struct al3320a_data *data = iio_priv(indio_dev); > + int ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + ret = al3320a_get_adc_value(data); > + if (ret < 0) > + return ret; > + *val = ret; > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_SCALE: > + *val = al3320a_scales[data->range][0]; > + *val2 = al3320a_scales[data->range][1]; > + return IIO_VAL_INT_PLUS_MICRO; > + } > + return -EINVAL; > +} > + > +static int al3320a_write_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int val, int val2, long mask) > +{ > + struct al3320a_data *data = iio_priv(indio_dev); > + int i; > + > + switch (mask) { > + case IIO_CHAN_INFO_SCALE: > + for (i = 0; i < ARRAY_SIZE(al3320a_scales); i++) { > + if (val == al3320a_scales[i][0] && > + val2 == al3320a_scales[i][1]) > + return al3320a_set_config_range(data, i); > + } could add a break; here so it is not missed when handling more masks > + } > + return -EINVAL; > +} > + > +static const struct iio_info al3320a_info = { > + .driver_module = THIS_MODULE, > + .read_raw = al3320a_read_raw, > + .write_raw = al3320a_write_raw, > +}; > + > +static int al3320a_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct al3320a_data *data; > + struct iio_dev *indio_dev; > + int ret; > + > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); > + if (!indio_dev) > + return -ENOMEM; > + > + data = iio_priv(indio_dev); > + i2c_set_clientdata(client, indio_dev); > + data->client = client; > + > + indio_dev->dev.parent = &client->dev; > + indio_dev->info = &al3320a_info; > + indio_dev->name = AL3320A_DRV_NAME; > + indio_dev->channels = al3320a_channels; > + indio_dev->num_channels = ARRAY_SIZE(al3320a_channels); > + indio_dev->modes = INDIO_DIRECT_MODE; > + > + ret = al3320a_init(data); > + if (ret) { > + dev_err(&client->dev, "al3320a chip init failed\n"); > + return ret; > + } > + > + return devm_iio_device_register(&client->dev, indio_dev); > +} > + > +static int al3320a_remove(struct i2c_client *client) > +{ > + struct iio_dev *indio_dev = i2c_get_clientdata(client); > + struct al3320a_data *data = iio_priv(indio_dev); > + > + return al3320a_disable(data); extra space before al3320a_disable() > +} > + > +static const struct i2c_device_id al3320a_id[] = { > + {"al3320a", 0}, > + {} > +}; > +MODULE_DEVICE_TABLE(i2c, al3320a_id); > + > +static struct i2c_driver al3320a_driver = { > + .driver = { > + .name = AL3320A_DRV_NAME, > + }, > + .probe = al3320a_probe, > + .remove = al3320a_remove, > + .id_table = al3320a_id, > +}; > + > +module_i2c_driver(al3320a_driver); > + > +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@xxxxxxxxx>"); > +MODULE_DESCRIPTION("AL3320A Ambient Light Sensor driver"); > +MODULE_LICENSE("GPL v2"); > -- Peter Meerwald +43-664-2444418 (mobile) -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
