This patch adds support for KXCJ9-1008 3-axis acceleromenter sensor. KXCJ9-1008 uses the same register definitions as KXCJK-1013. The specification for KXCJ9-1008 can be downloaded from: http://www.kionix.com/sites/default/files/KXCJ9-1008%20Specifications%20Rev%205.pdf Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxxxx> --- drivers/iio/accel/Kconfig | 2 +- drivers/iio/accel/kxcjk-1013.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 5704d6b..01b857e 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -97,7 +97,7 @@ config KXCJK1013 select IIO_TRIGGERED_BUFFER help Say Y here if you want to build a driver for the Kionix KXCJK-1013 - triaxial acceleration sensor. + triaxial acceleration sensor. This driver also supports KXCJ9-1008. To compile this driver as a module, choose M here: the module will be called kxcjk-1013. diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index 57c515b..70a5679 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -932,12 +932,14 @@ static const struct dev_pm_ops kxcjk1013_pm_ops = { static const struct acpi_device_id kx_acpi_match[] = { {"KXCJ1013", 0}, + {"KXCJ1008", 0}, { }, }; MODULE_DEVICE_TABLE(acpi, kx_acpi_match); static const struct i2c_device_id kxcjk1013_id[] = { {"kxcjk1013", 0}, + {"kxcj91008", 0}, {} }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
