[PATCH] staging:iio: Remove ad5930/ad9850/ad9852/ad9910/ad9951 dummy drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



All what these 'drivers' do is expose a single (non standard ABI) sysfs
attribute that when written to does a direct pass-through to spi_write(). This
is rather ugly and does not justify the existence of a driver as the same can
easily done by using the spidev interface.

The drivers will eventually be rewritten as proper IIO ABI compliant drivers
which do have the proper abstraction layers between userspace and the device.
But in the meantime these driver do not add any extra value and just clutter up
the staging area. So just remove them.

Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
---
 drivers/staging/iio/frequency/Kconfig  |  35 ----
 drivers/staging/iio/frequency/Makefile |   5 -
 drivers/staging/iio/frequency/ad5930.c | 140 -------------
 drivers/staging/iio/frequency/ad9850.c | 120 -----------
 drivers/staging/iio/frequency/ad9852.c | 245 ----------------------
 drivers/staging/iio/frequency/ad9910.c | 371 ---------------------------------
 drivers/staging/iio/frequency/ad9951.c | 201 ------------------
 7 files changed, 1117 deletions(-)
 delete mode 100644 drivers/staging/iio/frequency/ad5930.c
 delete mode 100644 drivers/staging/iio/frequency/ad9850.c
 delete mode 100644 drivers/staging/iio/frequency/ad9852.c
 delete mode 100644 drivers/staging/iio/frequency/ad9910.c
 delete mode 100644 drivers/staging/iio/frequency/ad9951.c

diff --git a/drivers/staging/iio/frequency/Kconfig b/drivers/staging/iio/frequency/Kconfig
index 93b7141..fc726d3 100644
--- a/drivers/staging/iio/frequency/Kconfig
+++ b/drivers/staging/iio/frequency/Kconfig
@@ -3,13 +3,6 @@
 #
 menu "Direct Digital Synthesis"
 
-config AD5930
-	tristate "Analog Devices ad5930/5932 driver"
-	depends on SPI
-	help
-	  Say yes here to build support for Analog Devices DDS chip
-	  ad5930/ad5932, provides direct access via sysfs.
-
 config AD9832
 	tristate "Analog Devices ad9832/5 driver"
 	depends on SPI
@@ -30,32 +23,4 @@ config AD9834
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad9834.
 
-config AD9850
-	tristate "Analog Devices ad9850/1 driver"
-	depends on SPI
-	help
-	  Say yes here to build support for Analog Devices DDS chip
-	  ad9850/1, provides direct access via sysfs.
-
-config AD9852
-	tristate "Analog Devices ad9852/4 driver"
-	depends on SPI
-	help
-	  Say yes here to build support for Analog Devices DDS chip
-	  ad9852/4, provides direct access via sysfs.
-
-config AD9910
-	tristate "Analog Devices ad9910 driver"
-	depends on SPI
-	help
-	  Say yes here to build support for Analog Devices DDS chip
-	  ad9910, provides direct access via sysfs.
-
-config AD9951
-	tristate "Analog Devices ad9951 driver"
-	depends on SPI
-	help
-	  Say yes here to build support for Analog Devices DDS chip
-	  ad9951, provides direct access via sysfs.
-
 endmenu
diff --git a/drivers/staging/iio/frequency/Makefile b/drivers/staging/iio/frequency/Makefile
index 1477461..e5dbcfc 100644
--- a/drivers/staging/iio/frequency/Makefile
+++ b/drivers/staging/iio/frequency/Makefile
@@ -2,10 +2,5 @@
 # Makefile for Direct Digital Synthesis drivers
 #
 
-obj-$(CONFIG_AD5930) += ad5930.o
 obj-$(CONFIG_AD9832) += ad9832.o
 obj-$(CONFIG_AD9834) += ad9834.o
-obj-$(CONFIG_AD9850) += ad9850.o
-obj-$(CONFIG_AD9852) += ad9852.o
-obj-$(CONFIG_AD9910) += ad9910.o
-obj-$(CONFIG_AD9951) += ad9951.o
diff --git a/drivers/staging/iio/frequency/ad5930.c b/drivers/staging/iio/frequency/ad5930.c
deleted file mode 100644
index a4aeee6..0000000
--- a/drivers/staging/iio/frequency/ad5930.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Driver for ADI Direct Digital Synthesis ad5930
- *
- * Copyright (c) 2010-2010 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/types.h>
-#include <linux/mutex.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-
-#define DRV_NAME "ad5930"
-
-#define value_mask (u16)0xf000
-#define addr_shift 12
-
-/* Register format: 4 bits addr + 12 bits value */
-struct ad5903_config {
-	u16 control;
-	u16 incnum;
-	u16 frqdelt[2];
-	u16 incitvl;
-	u16 buritvl;
-	u16 strtfrq[2];
-};
-
-struct ad5930_state {
-	struct mutex lock;
-	struct spi_device *sdev;
-};
-
-static ssize_t ad5930_set_parameter(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf,
-					size_t len)
-{
-	struct spi_transfer xfer;
-	int ret;
-	struct ad5903_config *config = (struct ad5903_config *)buf;
-	struct iio_dev *idev = dev_to_iio_dev(dev);
-	struct ad5930_state *st = iio_priv(idev);
-
-	config->control = (config->control & ~value_mask);
-	config->incnum = (config->control & ~value_mask) | (1 << addr_shift);
-	config->frqdelt[0] = (config->control & ~value_mask) | (2 << addr_shift);
-	config->frqdelt[1] = (config->control & ~value_mask) | 3 << addr_shift;
-	config->incitvl = (config->control & ~value_mask) | 4 << addr_shift;
-	config->buritvl = (config->control & ~value_mask) | 8 << addr_shift;
-	config->strtfrq[0] = (config->control & ~value_mask) | 0xc << addr_shift;
-	config->strtfrq[1] = (config->control & ~value_mask) | 0xd << addr_shift;
-
-	xfer.len = len;
-	xfer.tx_buf = config;
-	mutex_lock(&st->lock);
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-error_ret:
-	mutex_unlock(&st->lock);
-
-	return ret ? ret : len;
-}
-
-static IIO_DEVICE_ATTR(dds, S_IWUSR, NULL, ad5930_set_parameter, 0);
-
-static struct attribute *ad5930_attributes[] = {
-	&iio_dev_attr_dds.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group ad5930_attribute_group = {
-	.attrs = ad5930_attributes,
-};
-
-static const struct iio_info ad5930_info = {
-	.attrs = &ad5930_attribute_group,
-	.driver_module = THIS_MODULE,
-};
-
-static int ad5930_probe(struct spi_device *spi)
-{
-	struct ad5930_state *st;
-	struct iio_dev *idev;
-	int ret = 0;
-
-	idev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
-	if (!idev)
-		return -ENOMEM;
-	spi_set_drvdata(spi, idev);
-	st = iio_priv(idev);
-
-	mutex_init(&st->lock);
-	st->sdev = spi;
-	idev->dev.parent = &spi->dev;
-	idev->info = &ad5930_info;
-	idev->modes = INDIO_DIRECT_MODE;
-
-	ret = iio_device_register(idev);
-	if (ret)
-		return ret;
-	spi->max_speed_hz = 2000000;
-	spi->mode = SPI_MODE_3;
-	spi->bits_per_word = 16;
-	spi_setup(spi);
-
-	return 0;
-}
-
-static int ad5930_remove(struct spi_device *spi)
-{
-	iio_device_unregister(spi_get_drvdata(spi));
-
-	return 0;
-}
-
-static struct spi_driver ad5930_driver = {
-	.driver = {
-		.name = DRV_NAME,
-		.owner = THIS_MODULE,
-	},
-	.probe = ad5930_probe,
-	.remove = ad5930_remove,
-};
-module_spi_driver(ad5930_driver);
-
-MODULE_AUTHOR("Cliff Cai");
-MODULE_DESCRIPTION("Analog Devices ad5930 driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("spi:" DRV_NAME);
diff --git a/drivers/staging/iio/frequency/ad9850.c b/drivers/staging/iio/frequency/ad9850.c
deleted file mode 100644
index 8727933..0000000
--- a/drivers/staging/iio/frequency/ad9850.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Driver for ADI Direct Digital Synthesis ad9850
- *
- * Copyright (c) 2010-2010 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/types.h>
-#include <linux/mutex.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-
-#define DRV_NAME "ad9850"
-
-/* Register format: 4 bits addr + 12 bits value */
-struct ad9850_config {
-	u8 control[5];
-};
-
-struct ad9850_state {
-	struct mutex lock;
-	struct spi_device *sdev;
-};
-
-static ssize_t ad9850_set_parameter(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf,
-					size_t len)
-{
-	struct spi_transfer xfer;
-	int ret;
-	struct ad9850_config *config = (struct ad9850_config *)buf;
-	struct iio_dev *idev = dev_to_iio_dev(dev);
-	struct ad9850_state *st = iio_priv(idev);
-
-	xfer.len = len;
-	xfer.tx_buf = config;
-	mutex_lock(&st->lock);
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	mutex_unlock(&st->lock);
-
-	return ret ? ret : len;
-}
-
-static IIO_DEVICE_ATTR(dds, S_IWUSR, NULL, ad9850_set_parameter, 0);
-
-static struct attribute *ad9850_attributes[] = {
-	&iio_dev_attr_dds.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group ad9850_attribute_group = {
-	.attrs = ad9850_attributes,
-};
-
-static const struct iio_info ad9850_info = {
-	.attrs = &ad9850_attribute_group,
-	.driver_module = THIS_MODULE,
-};
-
-static int ad9850_probe(struct spi_device *spi)
-{
-	struct ad9850_state *st;
-	struct iio_dev *idev;
-	int ret = 0;
-
-	idev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
-	if (!idev)
-		return -ENOMEM;
-	spi_set_drvdata(spi, idev);
-	st = iio_priv(idev);
-	mutex_init(&st->lock);
-	st->sdev = spi;
-
-	idev->dev.parent = &spi->dev;
-	idev->info = &ad9850_info;
-	idev->modes = INDIO_DIRECT_MODE;
-
-	ret = iio_device_register(idev);
-	if (ret)
-		return ret;
-	spi->max_speed_hz = 2000000;
-	spi->mode = SPI_MODE_3;
-	spi->bits_per_word = 16;
-	spi_setup(spi);
-
-	return 0;
-}
-
-static int ad9850_remove(struct spi_device *spi)
-{
-	iio_device_unregister(spi_get_drvdata(spi));
-
-	return 0;
-}
-
-static struct spi_driver ad9850_driver = {
-	.driver = {
-		.name = DRV_NAME,
-		.owner = THIS_MODULE,
-	},
-	.probe = ad9850_probe,
-	.remove = ad9850_remove,
-};
-module_spi_driver(ad9850_driver);
-
-MODULE_AUTHOR("Cliff Cai");
-MODULE_DESCRIPTION("Analog Devices ad9850 driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("spi:" DRV_NAME);
diff --git a/drivers/staging/iio/frequency/ad9852.c b/drivers/staging/iio/frequency/ad9852.c
deleted file mode 100644
index af2f2cc..0000000
--- a/drivers/staging/iio/frequency/ad9852.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * Driver for ADI Direct Digital Synthesis ad9852
- *
- * Copyright (c) 2010 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/types.h>
-#include <linux/mutex.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-
-#define DRV_NAME "ad9852"
-
-#define addr_phaad1 0x0
-#define addr_phaad2 0x1
-#define addr_fretu1 0x2
-#define addr_fretu2 0x3
-#define addr_delfre 0x4
-#define addr_updclk 0x5
-#define addr_ramclk 0x6
-#define addr_contrl 0x7
-#define addr_optskm 0x8
-#define addr_optskr 0xa
-#define addr_dacctl 0xb
-
-#define COMPPD		(1 << 4)
-#define REFMULT2	(1 << 2)
-#define BYPPLL		(1 << 5)
-#define PLLRANG		(1 << 6)
-#define IEUPCLK		(1)
-#define OSKEN		(1 << 5)
-
-#define read_bit	(1 << 7)
-
-/* Register format: 1 byte addr + value */
-struct ad9852_config {
-	u8 phajst0[3];
-	u8 phajst1[3];
-	u8 fretun1[6];
-	u8 fretun2[6];
-	u8 dltafre[6];
-	u8 updtclk[5];
-	u8 ramprat[4];
-	u8 control[5];
-	u8 outpskm[3];
-	u8 outpskr[2];
-	u8 daccntl[3];
-};
-
-struct ad9852_state {
-	struct mutex lock;
-	struct spi_device *sdev;
-};
-
-static ssize_t ad9852_set_parameter(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf,
-					size_t len)
-{
-	struct spi_transfer xfer;
-	int ret;
-	struct ad9852_config *config = (struct ad9852_config *)buf;
-	struct iio_dev *idev = dev_to_iio_dev(dev);
-	struct ad9852_state *st = iio_priv(idev);
-
-	xfer.len = 3;
-	xfer.tx_buf = &config->phajst0[0];
-	mutex_lock(&st->lock);
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 3;
-	xfer.tx_buf = &config->phajst1[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 6;
-	xfer.tx_buf = &config->fretun1[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 6;
-	xfer.tx_buf = &config->fretun2[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 6;
-	xfer.tx_buf = &config->dltafre[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 5;
-	xfer.tx_buf = &config->updtclk[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 4;
-	xfer.tx_buf = &config->ramprat[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 5;
-	xfer.tx_buf = &config->control[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 3;
-	xfer.tx_buf = &config->outpskm[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 2;
-	xfer.tx_buf = &config->outpskr[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 3;
-	xfer.tx_buf = &config->daccntl[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-error_ret:
-	mutex_unlock(&st->lock);
-
-	return ret ? ret : len;
-}
-
-static IIO_DEVICE_ATTR(dds, S_IWUSR, NULL, ad9852_set_parameter, 0);
-
-static void ad9852_init(struct ad9852_state *st)
-{
-	struct spi_transfer xfer;
-	int ret;
-	u8 config[5];
-
-	config[0] = addr_contrl;
-	config[1] = COMPPD;
-	config[2] = REFMULT2 | BYPPLL | PLLRANG;
-	config[3] = IEUPCLK;
-	config[4] = OSKEN;
-
-	mutex_lock(&st->lock);
-
-	xfer.len = 5;
-	xfer.tx_buf = &config;
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-error_ret:
-	mutex_unlock(&st->lock);
-
-
-
-}
-
-static struct attribute *ad9852_attributes[] = {
-	&iio_dev_attr_dds.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group ad9852_attribute_group = {
-	.attrs = ad9852_attributes,
-};
-
-static const struct iio_info ad9852_info = {
-	.attrs = &ad9852_attribute_group,
-	.driver_module = THIS_MODULE,
-};
-
-static int ad9852_probe(struct spi_device *spi)
-{
-	struct ad9852_state *st;
-	struct iio_dev *idev;
-	int ret = 0;
-
-	idev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
-	if (!idev)
-		return -ENOMEM;
-	st = iio_priv(idev);
-	spi_set_drvdata(spi, idev);
-	mutex_init(&st->lock);
-	st->sdev = spi;
-
-	idev->dev.parent = &spi->dev;
-	idev->info = &ad9852_info;
-	idev->modes = INDIO_DIRECT_MODE;
-
-	ret = devm_iio_device_register(&spi->dev, idev);
-	if (ret)
-		return ret;
-	spi->max_speed_hz = 2000000;
-	spi->mode = SPI_MODE_3;
-	spi->bits_per_word = 8;
-	spi_setup(spi);
-	ad9852_init(st);
-
-	return 0;
-}
-
-static struct spi_driver ad9852_driver = {
-	.driver = {
-		.name = DRV_NAME,
-		.owner = THIS_MODULE,
-	},
-	.probe = ad9852_probe,
-};
-module_spi_driver(ad9852_driver);
-
-MODULE_AUTHOR("Cliff Cai");
-MODULE_DESCRIPTION("Analog Devices ad9852 driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("spi:" DRV_NAME);
diff --git a/drivers/staging/iio/frequency/ad9910.c b/drivers/staging/iio/frequency/ad9910.c
deleted file mode 100644
index 755e048..0000000
--- a/drivers/staging/iio/frequency/ad9910.c
+++ /dev/null
@@ -1,371 +0,0 @@
-/*
- * Driver for ADI Direct Digital Synthesis ad9910
- *
- * Copyright (c) 2010 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/types.h>
-#include <linux/mutex.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-
-#define DRV_NAME "ad9910"
-
-#define CFR1 0x0
-#define CFR2 0x1
-#define CFR3 0x2
-
-#define AUXDAC 0x3
-#define IOUPD 0x4
-#define FTW 0x7
-#define POW 0x8
-#define ASF 0x9
-#define MULTC 0x0A
-#define DIG_RAMPL 0x0B
-#define DIG_RAMPS 0x0C
-#define DIG_RAMPR 0x0D
-#define SIN_TONEP0 0x0E
-#define SIN_TONEP1 0x0F
-#define SIN_TONEP2 0x10
-#define SIN_TONEP3 0x11
-#define SIN_TONEP4 0x12
-#define SIN_TONEP5 0x13
-#define SIN_TONEP6 0x14
-#define SIN_TONEP7 0x15
-
-#define RAM_ENABLE	(1 << 7)
-
-#define MANUAL_OSK	(1 << 7)
-#define INVSIC		(1 << 6)
-#define DDS_SINEOP	(1)
-
-#define AUTO_OSK	(1)
-#define OSKEN		(1 << 1)
-#define LOAD_ARR	(1 << 2)
-#define CLR_PHA		(1 << 3)
-#define CLR_DIG		(1 << 4)
-#define ACLR_PHA	(1 << 5)
-#define ACLR_DIG	(1 << 6)
-#define LOAD_LRR	(1 << 7)
-
-#define LSB_FST		(1)
-#define SDIO_IPT	(1 << 1)
-#define EXT_PWD		(1 << 3)
-#define ADAC_PWD	(1 << 4)
-#define REFCLK_PWD	(1 << 5)
-#define DAC_PWD		(1 << 6)
-#define DIG_PWD		(1 << 7)
-
-#define ENA_AMP		(1)
-#define READ_FTW	(1)
-#define DIGR_LOW	(1 << 1)
-#define DIGR_HIGH	(1 << 2)
-#define DIGR_ENA	(1 << 3)
-#define SYNCCLK_ENA	(1 << 6)
-#define ITER_IOUPD	(1 << 7)
-
-#define TX_ENA		(1 << 1)
-#define PDCLK_INV	(1 << 2)
-#define PDCLK_ENB	(1 << 3)
-
-#define PARA_ENA	(1 << 4)
-#define SYNC_DIS	(1 << 5)
-#define DATA_ASS	(1 << 6)
-#define MATCH_ENA	(1 << 7)
-
-#define PLL_ENA		(1)
-#define PFD_RST		(1 << 2)
-#define REFCLK_RST	(1 << 6)
-#define REFCLK_BYP	(1 << 7)
-
-/* Register format: 1 byte addr + value */
-struct ad9910_config {
-	u8 auxdac[5];
-	u8 ioupd[5];
-	u8 ftw[5];
-	u8 pow[3];
-	u8 asf[5];
-	u8 multc[5];
-	u8 dig_rampl[9];
-	u8 dig_ramps[9];
-	u8 dig_rampr[5];
-	u8 sin_tonep0[9];
-	u8 sin_tonep1[9];
-	u8 sin_tonep2[9];
-	u8 sin_tonep3[9];
-	u8 sin_tonep4[9];
-	u8 sin_tonep5[9];
-	u8 sin_tonep6[9];
-	u8 sin_tonep7[9];
-};
-
-struct ad9910_state {
-	struct mutex lock;
-	struct spi_device *sdev;
-};
-
-static ssize_t ad9910_set_parameter(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf,
-					size_t len)
-{
-	struct spi_transfer xfer;
-	int ret;
-	struct ad9910_config *config = (struct ad9910_config *)buf;
-	struct iio_dev *idev = dev_to_iio_dev(dev);
-	struct ad9910_state *st = iio_priv(idev);
-
-	xfer.len = 5;
-	xfer.tx_buf = &config->auxdac[0];
-	mutex_lock(&st->lock);
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 5;
-	xfer.tx_buf = &config->ioupd[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 5;
-	xfer.tx_buf = &config->ftw[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 3;
-	xfer.tx_buf = &config->pow[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 5;
-	xfer.tx_buf = &config->asf[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 5;
-	xfer.tx_buf = &config->multc[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 9;
-	xfer.tx_buf = &config->dig_rampl[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 9;
-	xfer.tx_buf = &config->dig_ramps[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 5;
-	xfer.tx_buf = &config->dig_rampr[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 9;
-	xfer.tx_buf = &config->sin_tonep0[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 9;
-	xfer.tx_buf = &config->sin_tonep1[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 9;
-	xfer.tx_buf = &config->sin_tonep2[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-	xfer.len = 9;
-	xfer.tx_buf = &config->sin_tonep3[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 9;
-	xfer.tx_buf = &config->sin_tonep4[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 9;
-	xfer.tx_buf = &config->sin_tonep5[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 9;
-	xfer.tx_buf = &config->sin_tonep6[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 9;
-	xfer.tx_buf = &config->sin_tonep7[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-error_ret:
-	mutex_unlock(&st->lock);
-
-	return ret ? ret : len;
-}
-
-static IIO_DEVICE_ATTR(dds, S_IWUSR, NULL, ad9910_set_parameter, 0);
-
-static void ad9910_init(struct ad9910_state *st)
-{
-	struct spi_transfer xfer;
-	int ret;
-	u8 cfr[5];
-
-	cfr[0] = CFR1;
-	cfr[1] = 0;
-	cfr[2] = MANUAL_OSK | INVSIC | DDS_SINEOP;
-	cfr[3] = AUTO_OSK | OSKEN | ACLR_PHA | ACLR_DIG | LOAD_LRR;
-	cfr[4] = 0;
-
-	mutex_lock(&st->lock);
-
-	xfer.len = 5;
-	xfer.tx_buf = &cfr;
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	cfr[0] = CFR2;
-	cfr[1] = ENA_AMP;
-	cfr[2] = READ_FTW | DIGR_ENA | ITER_IOUPD;
-	cfr[3] = TX_ENA | PDCLK_INV | PDCLK_ENB;
-	cfr[4] = PARA_ENA;
-
-	xfer.len = 5;
-	xfer.tx_buf = &cfr;
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	cfr[0] = CFR3;
-	cfr[1] = PLL_ENA;
-	cfr[2] = 0;
-	cfr[3] = REFCLK_RST | REFCLK_BYP;
-	cfr[4] = 0;
-
-	xfer.len = 5;
-	xfer.tx_buf = &cfr;
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-error_ret:
-	mutex_unlock(&st->lock);
-
-
-
-}
-
-static struct attribute *ad9910_attributes[] = {
-	&iio_dev_attr_dds.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group ad9910_attribute_group = {
-	.attrs = ad9910_attributes,
-};
-
-static const struct iio_info ad9910_info = {
-	.attrs = &ad9910_attribute_group,
-	.driver_module = THIS_MODULE,
-};
-
-static int ad9910_probe(struct spi_device *spi)
-{
-	struct ad9910_state *st;
-	struct iio_dev *idev;
-	int ret = 0;
-
-	idev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
-	if (!idev)
-		return -ENOMEM;
-	spi_set_drvdata(spi, idev);
-	st = iio_priv(idev);
-	mutex_init(&st->lock);
-	st->sdev = spi;
-
-	idev->dev.parent = &spi->dev;
-	idev->info = &ad9910_info;
-	idev->modes = INDIO_DIRECT_MODE;
-
-	ret = iio_device_register(idev);
-	if (ret)
-		return ret;
-	spi->max_speed_hz = 2000000;
-	spi->mode = SPI_MODE_3;
-	spi->bits_per_word = 8;
-	spi_setup(spi);
-	ad9910_init(st);
-	return 0;
-}
-
-static int ad9910_remove(struct spi_device *spi)
-{
-	iio_device_unregister(spi_get_drvdata(spi));
-
-	return 0;
-}
-
-static struct spi_driver ad9910_driver = {
-	.driver = {
-		.name = DRV_NAME,
-		.owner = THIS_MODULE,
-	},
-	.probe = ad9910_probe,
-	.remove = ad9910_remove,
-};
-module_spi_driver(ad9910_driver);
-
-MODULE_AUTHOR("Cliff Cai");
-MODULE_DESCRIPTION("Analog Devices ad9910 driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("spi:" DRV_NAME);
diff --git a/drivers/staging/iio/frequency/ad9951.c b/drivers/staging/iio/frequency/ad9951.c
deleted file mode 100644
index d465db0..0000000
--- a/drivers/staging/iio/frequency/ad9951.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Driver for ADI Direct Digital Synthesis ad9951
- *
- * Copyright (c) 2010 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/types.h>
-#include <linux/mutex.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-
-#define DRV_NAME "ad9951"
-
-#define CFR1 0x0
-#define CFR2 0x1
-
-#define AUTO_OSK	(1)
-#define OSKEN		(1 << 1)
-#define LOAD_ARR	(1 << 2)
-
-#define AUTO_SYNC	(1 << 7)
-
-#define LSB_FST		(1)
-#define SDIO_IPT	(1 << 1)
-#define CLR_PHA		(1 << 2)
-#define SINE_OPT	(1 << 4)
-#define ACLR_PHA	(1 << 5)
-
-#define VCO_RANGE	(1 << 2)
-
-#define CRS_OPT		(1 << 1)
-#define HMANU_SYNC	(1 << 2)
-#define HSPD_SYNC	(1 << 3)
-
-/* Register format: 1 byte addr + value */
-struct ad9951_config {
-	u8 asf[3];
-	u8 arr[2];
-	u8 ftw0[5];
-	u8 ftw1[3];
-};
-
-struct ad9951_state {
-	struct mutex lock;
-	struct spi_device *sdev;
-};
-
-static ssize_t ad9951_set_parameter(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf,
-					size_t len)
-{
-	struct spi_transfer xfer;
-	int ret;
-	struct ad9951_config *config = (struct ad9951_config *)buf;
-	struct iio_dev *idev = dev_to_iio_dev(dev);
-	struct ad9951_state *st = iio_priv(idev);
-
-	xfer.len = 3;
-	xfer.tx_buf = &config->asf[0];
-	mutex_lock(&st->lock);
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 2;
-	xfer.tx_buf = &config->arr[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 5;
-	xfer.tx_buf = &config->ftw0[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	xfer.len = 3;
-	xfer.tx_buf = &config->ftw1[0];
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-error_ret:
-	mutex_unlock(&st->lock);
-
-	return ret ? ret : len;
-}
-
-static IIO_DEVICE_ATTR(dds, S_IWUSR, NULL, ad9951_set_parameter, 0);
-
-static void ad9951_init(struct ad9951_state *st)
-{
-	struct spi_transfer xfer;
-	int ret;
-	u8 cfr[5];
-
-	cfr[0] = CFR1;
-	cfr[1] = 0;
-	cfr[2] = LSB_FST | CLR_PHA | SINE_OPT | ACLR_PHA;
-	cfr[3] = AUTO_OSK | OSKEN | LOAD_ARR;
-	cfr[4] = 0;
-
-	mutex_lock(&st->lock);
-
-	xfer.len = 5;
-	xfer.tx_buf = &cfr;
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-	cfr[0] = CFR2;
-	cfr[1] = VCO_RANGE;
-	cfr[2] = HSPD_SYNC;
-	cfr[3] = 0;
-
-	xfer.len = 4;
-	xfer.tx_buf = &cfr;
-
-	ret = spi_sync_transfer(st->sdev, &xfer, 1);
-	if (ret)
-		goto error_ret;
-
-error_ret:
-	mutex_unlock(&st->lock);
-
-
-
-}
-
-static struct attribute *ad9951_attributes[] = {
-	&iio_dev_attr_dds.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group ad9951_attribute_group = {
-	.attrs = ad9951_attributes,
-};
-
-static const struct iio_info ad9951_info = {
-	.attrs = &ad9951_attribute_group,
-	.driver_module = THIS_MODULE,
-};
-
-static int ad9951_probe(struct spi_device *spi)
-{
-	struct ad9951_state *st;
-	struct iio_dev *idev;
-	int ret = 0;
-
-	idev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
-	if (!idev)
-		return -ENOMEM;
-	spi_set_drvdata(spi, idev);
-	st = iio_priv(idev);
-	mutex_init(&st->lock);
-	st->sdev = spi;
-
-	idev->dev.parent = &spi->dev;
-
-	idev->info = &ad9951_info;
-	idev->modes = INDIO_DIRECT_MODE;
-
-	ret = devm_iio_device_register(&spi->dev, idev);
-	if (ret)
-		return ret;
-	spi->max_speed_hz = 2000000;
-	spi->mode = SPI_MODE_3;
-	spi->bits_per_word = 8;
-	spi_setup(spi);
-	ad9951_init(st);
-	return 0;
-}
-
-static struct spi_driver ad9951_driver = {
-	.driver = {
-		.name = DRV_NAME,
-		.owner = THIS_MODULE,
-	},
-	.probe = ad9951_probe,
-};
-module_spi_driver(ad9951_driver);
-
-MODULE_AUTHOR("Cliff Cai");
-MODULE_DESCRIPTION("Analog Devices ad9951 driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("spi:" DRV_NAME);
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux