On 07/22/2014 09:59 PM, Arnd Bergmann wrote: > On Tuesday 22 July 2014 11:11:14 Chanwoo Choi wrote: >> This patch add support for s3c2410/s3c2416/s3c2440/s3c2443 ADC. The s3c24xx >> is alomost same as ADCv1. But, There are a little difference as following: >> - ADCMUX register address to select channel >> - ADCDAT mask (10bit or 12bit ADC resolution according to SoC version) >> >> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx> >> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> >> > > While looking at the driver again to see if the touchscreen patch needs > an update for this, I noticed that the s3c24xx variants don't have the > ADC_V1_INTCLR and ADC_V1_CLRINTPNDNUP registers, so I assume your patch > will have to be updated not to acknowledge the interrupts. > > It's possible that writing to the missing registers is harmless though and > that you don't need that change. OK, I'll remove the function pointer of clear_irq for s3c24xx. Best Regards, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
