---
drivers/iio/magnetometer/hid-sensor-magn-3d.c | 149 ++++++++++++++++++--------
1 file changed, 105 insertions(+), 44 deletions(-)
diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
index b2b0937..d3b9114 100644
--- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
+++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
@@ -42,7 +42,12 @@ struct magn_3d_state {
struct hid_sensor_hub_callbacks callbacks;
struct hid_sensor_common common_attributes;
struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX];
- u32 magn_val[MAGN_3D_CHANNEL_MAX];
+
+ /* dynamically sized array to hold sensor values */
+ u32 *iio_vals;
+ /* array of pointers to sensor value */
+ u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX];
+
int scale_pre_decml;
int scale_post_decml;
int scale_precision;
@@ -66,7 +71,6 @@ static const struct iio_chan_spec magn_3d_channels[] = {
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
- .scan_index = CHANNEL_SCAN_INDEX_X,
}, {
.type = IIO_MAGN,
.modified = 1,
@@ -76,7 +80,6 @@ static const struct iio_chan_spec magn_3d_channels[] = {
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
- .scan_index = CHANNEL_SCAN_INDEX_Y,
}, {
.type = IIO_MAGN,
.modified = 1,
@@ -86,7 +89,6 @@ static const struct iio_chan_spec magn_3d_channels[] = {
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
- .scan_index = CHANNEL_SCAN_INDEX_Z,
}
};
@@ -126,8 +128,8 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
msleep_interruptible(poll_value * 2);
report_id =
- magn_state->magn[chan->scan_index].report_id;
- address = magn_3d_addresses[chan->scan_index];
+ magn_state->magn[chan->address].report_id;
+ address = magn_3d_addresses[chan->address];
if (report_id >= 0)
*val = sensor_hub_input_attr_get_raw_value(
magn_state->common_attributes.hsdev,
@@ -218,8 +220,8 @@ static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev,
dev_dbg(&indio_dev->dev, "magn_3d_proc_event\n");
if (atomic_read(&magn_state->common_attributes.data_ready))
hid_sensor_push_data(indio_dev,
- magn_state->magn_val,
- sizeof(magn_state->magn_val));
+ magn_state->iio_vals,
+ sizeof(magn_state->iio_vals));
return 0;
}
@@ -233,52 +235,119 @@ static int magn_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
struct iio_dev *indio_dev = platform_get_drvdata(priv);
struct magn_3d_state *magn_state = iio_priv(indio_dev);
int offset;
- int ret = -EINVAL;
+ int ret = 0;
+ u32 *iio_val = NULL;
switch (usage_id) {
case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS:
case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS:
case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS:
- offset = usage_id - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS;
- magn_state->magn_val[CHANNEL_SCAN_INDEX_X + offset] =
- *(u32 *)raw_data;
- ret = 0;
+ offset = (usage_id - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS)
+ + CHANNEL_SCAN_INDEX_X;
break;
default:
- break;
+ return -EINVAL;
}
+ iio_val = magn_state->magn_val_addr[offset];
+
+ if (iio_val != NULL)
+ *iio_val = *((u32 *)raw_data);
+ else
+ ret = -EINVAL;
+
return ret;
}
/* Parse report which is specific to an usage id*/
static int magn_3d_parse_report(struct platform_device *pdev,
struct hid_sensor_hub_device *hsdev,
- struct iio_chan_spec *channels,
+ struct iio_chan_spec **channels,
+ int *chan_count,
unsigned usage_id,
struct magn_3d_state *st)
{
- int ret;
int i;
+ int attr_count = 0;
+ struct iio_chan_spec *_channels;
+
+ /* Scan for each usage attribute supported */
+ for (i = 0; i < MAGN_3D_CHANNEL_MAX; i++) {
+ int status;
+ u32 address = magn_3d_addresses[i];
+
+ /* Check if usage attribute exists in the sensor hub device */
+ status = sensor_hub_input_get_attribute_info(hsdev,
+ HID_INPUT_REPORT,
+ usage_id,
+ address,
+ &(st->magn[i]));
+ if (!status)
+ attr_count++;
+ }
- for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) {
- ret = sensor_hub_input_get_attribute_info(hsdev,
- HID_INPUT_REPORT,
- usage_id,
- HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS + i,
- &st->magn[CHANNEL_SCAN_INDEX_X + i]);
- if (ret < 0)
- break;
- magn_3d_adjust_channel_bit_mask(channels,
- CHANNEL_SCAN_INDEX_X + i,
- st->magn[CHANNEL_SCAN_INDEX_X + i].size);
+ if (attr_count <= 0) {
+ dev_err(&pdev->dev,
+ "failed to find any supported usage attributes in report\n");
+ return -EINVAL;
}
- dev_dbg(&pdev->dev, "magn_3d %x:%x, %x:%x, %x:%x\n",
+
+ dev_dbg(&pdev->dev, "magn_3d Found %d usage attributes\n",
+ attr_count);
+ dev_dbg(&pdev->dev, "magn_3d X: %x:%x Y: %x:%x Z: %x:%x\n",
st->magn[0].index,
st->magn[0].report_id,
st->magn[1].index, st->magn[1].report_id,
st->magn[2].index, st->magn[2].report_id);
+ /* Setup IIO channel array */
+ _channels = devm_kcalloc(&pdev->dev, attr_count,
+ sizeof(struct iio_chan_spec),
+ GFP_KERNEL);
+ if (!_channels) {
+ dev_err(&pdev->dev,
+ "failed to allocate space for iio channels\n");
+ return -ENOMEM;
+ }
+
+ st->iio_vals = devm_kcalloc(&pdev->dev, attr_count,
+ sizeof(u32),
+ GFP_KERNEL);
+ if (!st->iio_vals) {
+ dev_err(&pdev->dev,
+ "failed to allocate space for iio values array\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0, *chan_count = 0;
+ i < MAGN_3D_CHANNEL_MAX && *chan_count < attr_count;
+ i++){
+ if (st->magn[i].index >= 0) {
+ /* Setup IIO channel struct */
+ (_channels[*chan_count]) = magn_3d_channels[i];
+ (_channels[*chan_count]).scan_index = *chan_count;
+ (_channels[*chan_count]).address = i;
+
+ /* Set magn_val_addr to iio value address */
+ st->magn_val_addr[i] = &(st->iio_vals[*chan_count]);
+ magn_3d_adjust_channel_bit_mask(_channels,
+ *chan_count,
+ st->magn[i].size);
+ (*chan_count)++;
+ }
+ }
+
+ if (*chan_count <= 0) {
+ dev_err(&pdev->dev,
+ "failed to find any magnetic channels setup\n");
+ return -EINVAL;
+ }
+
+ *channels = _channels;
+
+ dev_dbg(&pdev->dev, "magn_3d Setup %d IIO channels\n",
+ *chan_count);
+
st->scale_precision = hid_sensor_format_scale(
HID_USAGE_SENSOR_COMPASS_3D,
&st->magn[CHANNEL_SCAN_INDEX_X],
@@ -296,7 +365,7 @@ static int magn_3d_parse_report(struct platform_device *pdev,
st->common_attributes.sensitivity.report_id);
}
- return ret;
+ return 0;
}
/* Function to initialize the processing for usage id */
@@ -308,6 +377,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
struct magn_3d_state *magn_state;
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_chan_spec *channels;
+ int chan_count = 0;
indio_dev = devm_iio_device_alloc(&pdev->dev,
sizeof(struct magn_3d_state));
@@ -328,22 +398,16 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
return ret;
}
- channels = kmemdup(magn_3d_channels, sizeof(magn_3d_channels),
- GFP_KERNEL);
- if (!channels) {
- dev_err(&pdev->dev, "failed to duplicate channels\n");
- return -ENOMEM;
- }
-
- ret = magn_3d_parse_report(pdev, hsdev, channels,
+ ret = magn_3d_parse_report(pdev, hsdev,
+ &channels, &chan_count,
HID_USAGE_SENSOR_COMPASS_3D, magn_state);
if (ret) {
- dev_err(&pdev->dev, "failed to setup attributes\n");
- goto error_free_dev_mem;
+ dev_err(&pdev->dev, "failed to parse report\n");
+ return ret;
}
indio_dev->channels = channels;
- indio_dev->num_channels = ARRAY_SIZE(magn_3d_channels);
+ indio_dev->num_channels = chan_count;
indio_dev->dev.parent = &pdev->dev;
indio_dev->info = &magn_3d_info;
indio_dev->name = name;
@@ -353,7 +417,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
NULL, NULL);
if (ret) {
dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
- goto error_free_dev_mem;
+ return ret;
}
atomic_set(&magn_state->common_attributes.data_ready, 0);
ret = hid_sensor_setup_trigger(indio_dev, name,
@@ -387,8 +451,6 @@ error_remove_trigger:
hid_sensor_remove_trigger(&magn_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
-error_free_dev_mem:
- kfree(indio_dev->channels);
return ret;
}
@@ -403,7 +465,6 @@ static int hid_magn_3d_remove(struct platform_device *pdev)
iio_device_unregister(indio_dev);
hid_sensor_remove_trigger(&magn_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
- kfree(indio_dev->channels);
return 0;
}
