On 07/14/2014 10:43 PM, Heiko Stübner wrote:
Looks really good overall.
[...]
+static int rockchip_saradc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct rockchip_saradc *info = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+
+ /* 8 clock periods as delay between power up and start cmd */
+ writel_relaxed(8, info->regs + SARADC_DLY_PU_SOC);
+
It makes sense to call reinit_completion() here.
+ /* Select the channel to be used and trigger conversion */
+ writel(SARADC_CTRL_POWER_CTRL
+ | (chan->channel & SARADC_CTRL_CHN_MASK)
+ | SARADC_CTRL_IRQ_ENABLE,
+ info->regs + SARADC_CTRL);
+
+ if (!wait_for_completion_timeout(&info->completion,
+ SARADC_TIMEOUT)) {
+ writel_relaxed(0, info->regs + SARADC_CTRL);
+ mutex_unlock(&indio_dev->mlock);
+ return -ETIMEDOUT;
+ }
+
+ *val = info->last_val;
+ mutex_unlock(&indio_dev->mlock);
+ return IIO_VAL_INT;
[...]
+static int rockchip_saradc_probe(struct platform_device *pdev)
+{
+ struct rockchip_saradc *info = NULL;
+ struct device_node *np = pdev->dev.of_node;
+ struct iio_dev *indio_dev = NULL;
+ struct resource *mem;
+ int ret;
+ int irq;
+ u32 rate;
+
+ if (!np)
+ return -ENODEV;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+ if (!indio_dev) {
+ dev_err(&pdev->dev, "failed allocating iio device\n");
+ return -ENOMEM;
+ }
+ info = iio_priv(indio_dev);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ info->regs = devm_request_and_ioremap(&pdev->dev, mem);
devm_request_and_ioremap() is deprecated an will be removed in the next
release[1]. Use devm_ioremap_resource(), note that devm_ioremap_resource()
returns a ERR_PTR instead of NULL on error.
[1] https://lkml.org/lkml/2014/6/11/26
+ if (!info->regs)
+ return -ENOMEM;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return irq;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, rockchip_saradc_isr,
+ 0, dev_name(&pdev->dev), info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed requesting irq %d\n", irq);
+ return ret;
+ }
+
+ init_completion(&info->completion);
Since the completion is used in the interrupt callback it must be
initialized before the interrupt is requested.
+
[...]
+ /* use a default of 1MHz for the converter clock */
+ ret = of_property_read_u32(np, "clock-frequency", &rate);
+ if (ret < 0)
+ rate = 1000000;
Should this really be in the devicetree or shouldn't this be user
configurable at runtime?
[...]
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
