Re: [PATCHv4 2/4] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tomasz,

On 06/18/2014 04:58 PM, Tomasz Figa wrote:
> Hi Chanwoo,
> 
> On 18.06.2014 04:20, Chanwoo Choi wrote:
>> This patch control special clock for ADC in Exynos series's FSYS block.
>> If special clock of ADC is registerd on clock list of common clk framework,
>> Exynos ADC drvier have to control this clock.
>>
>> Exynos3250/Exynos4/Exynos5 has 'adc' clock as following:
>> - 'adc' clock: bus clock for ADC
>>
>> Exynos3250 has additional 'sclk_adc' clock as following:
>> - 'sclk_adc' clock: special clock for ADC which provide clock to internal ADC
>>
>> Exynos 4210/4212/4412 and Exynos5250/5420 has not included 'sclk_adc' clock
>> in FSYS_BLK. But, Exynos3250 based on Cortex-A7 has only included 'sclk_adc'
>> clock in FSYS_BLK.
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>> ---
>>  drivers/iio/adc/exynos_adc.c | 93 ++++++++++++++++++++++++++++++++++++++------
>>  1 file changed, 81 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
>> index c30def6..6b026ac 100644
>> --- a/drivers/iio/adc/exynos_adc.c
>> +++ b/drivers/iio/adc/exynos_adc.c
>> @@ -41,7 +41,8 @@
>>  
>>  enum adc_version {
>>  	ADC_V1,
>> -	ADC_V2
>> +	ADC_V2,
>> +	ADC_V2_EXYNOS3250,
>>  };
>>  
>>  /* EXYNOS4412/5250 ADC_V1 registers definitions */
>> @@ -85,9 +86,11 @@ enum adc_version {
>>  #define EXYNOS_ADC_TIMEOUT	(msecs_to_jiffies(100))
>>  
>>  struct exynos_adc {
>> +	struct device		*dev;
>>  	void __iomem		*regs;
>>  	void __iomem		*enable_reg;
>>  	struct clk		*clk;
>> +	struct clk		*sclk;
>>  	unsigned int		irq;
>>  	struct regulator	*vdd;
>>  	struct exynos_adc_ops	*ops;
>> @@ -96,6 +99,7 @@ struct exynos_adc {
>>  
>>  	u32			value;
>>  	unsigned int            version;
>> +	bool			needs_sclk;
> 
> This should be rather a part of the variant struct. See my comments to
> patch 1/4.

OK, I'll include 'needs_sclk' in "variant" structure.

> 
>>  };
>>  
>>  struct exynos_adc_ops {
>> @@ -103,11 +107,21 @@ struct exynos_adc_ops {
>>  	void (*clear_irq)(struct exynos_adc *info);
>>  	void (*start_conv)(struct exynos_adc *info, unsigned long addr);
>>  	void (*stop_conv)(struct exynos_adc *info);
>> +	void (*disable_clk)(struct exynos_adc *info);
>> +	int (*enable_clk)(struct exynos_adc *info);
>>  };
>>  
>>  static const struct of_device_id exynos_adc_match[] = {
>> -	{ .compatible = "samsung,exynos-adc-v1", .data = (void *)ADC_V1 },
>> -	{ .compatible = "samsung,exynos-adc-v2", .data = (void *)ADC_V2 },
>> +	{
>> +		.compatible = "samsung,exynos-adc-v1",
>> +		.data = (void *)ADC_V1,
>> +	}, {
>> +		.compatible = "samsung,exynos-adc-v2",
>> +		.data = (void *)ADC_V2,
>> +	}, {
>> +		.compatible = "samsung,exynos3250-adc-v2",
>> +		.data = (void *)ADC_V2_EXYNOS3250,
>> +	},
>>  	{},
>>  };
>>  MODULE_DEVICE_TABLE(of, exynos_adc_match);
>> @@ -156,11 +170,42 @@ static void exynos_adc_v1_stop_conv(struct exynos_adc *info)
>>  	writel(con, ADC_V1_CON(info->regs));
>>  }
>>  
>> +static void exynos_adc_disable_clk(struct exynos_adc *info)
>> +{
>> +	if (info->needs_sclk)
>> +		clk_disable_unprepare(info->sclk);
>> +	clk_disable_unprepare(info->clk);
>> +}
>> +
>> +static int exynos_adc_enable_clk(struct exynos_adc *info)
>> +{
>> +	int ret;
>> +
>> +	ret = clk_prepare_enable(info->clk);
>> +	if (ret) {
>> +		dev_err(info->dev, "failed enabling adc clock: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	if (info->needs_sclk) {
>> +		ret = clk_prepare_enable(info->sclk);
>> +		if (ret) {
>> +			clk_disable_unprepare(info->clk);
>> +			dev_err(info->dev,
>> +				"failed enabling sclk_tsadc clock: %d\n", ret);
>> +		}
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>>  static struct exynos_adc_ops exynos_adc_v1_ops = {
>>  	.init_hw	= exynos_adc_v1_init_hw,
>>  	.clear_irq	= exynos_adc_v1_clear_irq,
>>  	.start_conv	= exynos_adc_v1_start_conv,
>>  	.stop_conv	= exynos_adc_v1_stop_conv,
>> +	.disable_clk	= exynos_adc_disable_clk,
>> +	.enable_clk	= exynos_adc_enable_clk,
>>  };
>>  
>>  static void exynos_adc_v2_init_hw(struct exynos_adc *info)
>> @@ -210,6 +255,8 @@ static struct exynos_adc_ops exynos_adc_v2_ops = {
>>  	.start_conv	= exynos_adc_v2_start_conv,
>>  	.clear_irq	= exynos_adc_v2_clear_irq,
>>  	.stop_conv	= exynos_adc_v2_stop_conv,
>> +	.disable_clk	= exynos_adc_disable_clk,
>> +	.enable_clk	= exynos_adc_enable_clk,
> 
> Based on the fact that all variants use the same function, I don't think
> there is a reason to add .{disable,enable}_clk in the ops struct. If
> they diverge in future, they could be added later, but right now it
> doesn't have any value.

OK, I'll not add .{disable,enable}_clk and then just use following functions for clock control:
- exynos_adc_prepare_clk() : once execute this function in _probe()
- exynos_adc_unprepare_clk() : once execute this function in _remove()
- exynos_adc_enable_clk()
- exynos_adc_disable_clk()

Best Regards,
Chanwoo Choi

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux