Re: [PATCHv4 1/4] iio: adc: exynos_adc: Add exynos_adc_ops structure to improve readability

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Chanwoo,

On 18.06.2014 04:20, Chanwoo Choi wrote:
> This patchset add 'exynos_adc_ops' structure which includes some functions
> to control ADC operation according to ADC version (v1 or v2).
> 
> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
>  drivers/iio/adc/exynos_adc.c | 174 +++++++++++++++++++++++++++++--------------
>  1 file changed, 120 insertions(+), 54 deletions(-)
> 
> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
> index 010578f..c30def6 100644
> --- a/drivers/iio/adc/exynos_adc.c
> +++ b/drivers/iio/adc/exynos_adc.c
> @@ -90,6 +90,7 @@ struct exynos_adc {
>  	struct clk		*clk;
>  	unsigned int		irq;
>  	struct regulator	*vdd;
> +	struct exynos_adc_ops	*ops;
>  
>  	struct completion	completion;
>  
> @@ -97,6 +98,13 @@ struct exynos_adc {
>  	unsigned int            version;
>  };
>  
> +struct exynos_adc_ops {
> +	void (*init_hw)(struct exynos_adc *info);
> +	void (*clear_irq)(struct exynos_adc *info);
> +	void (*start_conv)(struct exynos_adc *info, unsigned long addr);
> +	void (*stop_conv)(struct exynos_adc *info);
> +};
> +
>  static const struct of_device_id exynos_adc_match[] = {
>  	{ .compatible = "samsung,exynos-adc-v1", .data = (void *)ADC_V1 },
>  	{ .compatible = "samsung,exynos-adc-v2", .data = (void *)ADC_V2 },
> @@ -112,30 +120,98 @@ static inline unsigned int exynos_adc_get_version(struct platform_device *pdev)
>  	return (unsigned int)match->data;
>  }
>  
> -static void exynos_adc_hw_init(struct exynos_adc *info)
> +static void exynos_adc_v1_init_hw(struct exynos_adc *info)
> +{
> +	u32 con1;
> +
> +	/* set default prescaler values and Enable prescaler */
> +	con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
> +
> +	/* Enable 12-bit ADC resolution */
> +	con1 |= ADC_V1_CON_RES;
> +	writel(con1, ADC_V1_CON(info->regs));
> +}
> +
> +static void exynos_adc_v1_start_conv(struct exynos_adc *info, unsigned long addr)
> +{
> +	u32 con1;
> +
> +	writel(addr, ADC_V1_MUX(info->regs));
> +
> +	con1 = readl(ADC_V1_CON(info->regs));
> +	writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
> +}
> +
> +static void exynos_adc_v1_clear_irq(struct exynos_adc *info)
> +{
> +	writel(1, ADC_V1_INTCLR(info->regs));
> +}
> +
> +static void exynos_adc_v1_stop_conv(struct exynos_adc *info)
> +{
> +	u32 con;
> +
> +	con = readl(ADC_V1_CON(info->regs));
> +	con |= ADC_V1_CON_STANDBY;
> +	writel(con, ADC_V1_CON(info->regs));
> +}
> +
> +static struct exynos_adc_ops exynos_adc_v1_ops = {
> +	.init_hw	= exynos_adc_v1_init_hw,
> +	.clear_irq	= exynos_adc_v1_clear_irq,
> +	.start_conv	= exynos_adc_v1_start_conv,
> +	.stop_conv	= exynos_adc_v1_stop_conv,
> +};
> +
> +static void exynos_adc_v2_init_hw(struct exynos_adc *info)
>  {
>  	u32 con1, con2;
>  
> -	if (info->version == ADC_V2) {
> -		con1 = ADC_V2_CON1_SOFT_RESET;
> -		writel(con1, ADC_V2_CON1(info->regs));
> +	con1 = ADC_V2_CON1_SOFT_RESET;
> +	writel(con1, ADC_V2_CON1(info->regs));
>  
> -		con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
> -			ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
> -		writel(con2, ADC_V2_CON2(info->regs));
> +	con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
> +		ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
> +	writel(con2, ADC_V2_CON2(info->regs));
>  
> -		/* Enable interrupts */
> -		writel(1, ADC_V2_INT_EN(info->regs));
> -	} else {
> -		/* set default prescaler values and Enable prescaler */
> -		con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
> +	/* Enable interrupts */
> +	writel(1, ADC_V2_INT_EN(info->regs));
> +}
>  
> -		/* Enable 12-bit ADC resolution */
> -		con1 |= ADC_V1_CON_RES;
> -		writel(con1, ADC_V1_CON(info->regs));
> -	}
> +static void exynos_adc_v2_start_conv(struct exynos_adc *info, unsigned long addr)
> +{
> +	u32 con1, con2;
> +
> +	con2 = readl(ADC_V2_CON2(info->regs));
> +	con2 &= ~ADC_V2_CON2_ACH_MASK;
> +	con2 |= ADC_V2_CON2_ACH_SEL(addr);
> +	writel(con2, ADC_V2_CON2(info->regs));
> +
> +	con1 = readl(ADC_V2_CON1(info->regs));
> +	writel(con1 | ADC_CON_EN_START, ADC_V2_CON1(info->regs));
> +}
> +
> +static void exynos_adc_v2_clear_irq(struct exynos_adc *info)
> +{
> +	writel(1, ADC_V2_INT_ST(info->regs));
> +}
> +
> +static void exynos_adc_v2_stop_conv(struct exynos_adc *info)
> +{
> +	u32 con;
> +
> +	con = readl(ADC_V2_CON1(info->regs));
> +	con &= ~ADC_CON_EN_START;
> +	writel(con, ADC_V2_CON1(info->regs));
>  }
>  
> +static struct exynos_adc_ops exynos_adc_v2_ops = {
> +	.init_hw	= exynos_adc_v2_init_hw,
> +	.start_conv	= exynos_adc_v2_start_conv,
> +	.clear_irq	= exynos_adc_v2_clear_irq,
> +	.stop_conv	= exynos_adc_v2_stop_conv,
> +};
> +
>  static int exynos_read_raw(struct iio_dev *indio_dev,
>  				struct iio_chan_spec const *chan,
>  				int *val,
> @@ -144,7 +220,6 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
>  {
>  	struct exynos_adc *info = iio_priv(indio_dev);
>  	unsigned long timeout;
> -	u32 con1, con2;
>  	int ret;
>  
>  	if (mask != IIO_CHAN_INFO_RAW)
> @@ -154,28 +229,15 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
>  	reinit_completion(&info->completion);
>  
>  	/* Select the channel to be used and Trigger conversion */
> -	if (info->version == ADC_V2) {
> -		con2 = readl(ADC_V2_CON2(info->regs));
> -		con2 &= ~ADC_V2_CON2_ACH_MASK;
> -		con2 |= ADC_V2_CON2_ACH_SEL(chan->address);
> -		writel(con2, ADC_V2_CON2(info->regs));
> -
> -		con1 = readl(ADC_V2_CON1(info->regs));
> -		writel(con1 | ADC_CON_EN_START,
> -				ADC_V2_CON1(info->regs));
> -	} else {
> -		writel(chan->address, ADC_V1_MUX(info->regs));
> -
> -		con1 = readl(ADC_V1_CON(info->regs));
> -		writel(con1 | ADC_CON_EN_START,
> -				ADC_V1_CON(info->regs));
> -	}
> +	if (info->ops->start_conv)
> +		info->ops->start_conv(info, chan->address);
>  
>  	timeout = wait_for_completion_timeout
>  			(&info->completion, EXYNOS_ADC_TIMEOUT);
>  	if (timeout == 0) {
>  		dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
> -		exynos_adc_hw_init(info);
> +		if (info->ops->init_hw)
> +			info->ops->init_hw(info);
>  		ret = -ETIMEDOUT;
>  	} else {
>  		*val = info->value;
> @@ -193,13 +255,11 @@ static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
>  	struct exynos_adc *info = (struct exynos_adc *)dev_id;
>  
>  	/* Read value */
> -	info->value = readl(ADC_V1_DATX(info->regs)) &
> -						ADC_DATX_MASK;
> +	info->value = readl(ADC_V1_DATX(info->regs)) & ADC_DATX_MASK;
> +
>  	/* clear irq */
> -	if (info->version == ADC_V2)
> -		writel(1, ADC_V2_INT_ST(info->regs));
> -	else
> -		writel(1, ADC_V1_INTCLR(info->regs));
> +	if (info->ops->clear_irq)
> +		info->ops->clear_irq(info);
>  
>  	complete(&info->completion);
>  
> @@ -277,6 +337,19 @@ static int exynos_adc_probe(struct platform_device *pdev)
>  
>  	info = iio_priv(indio_dev);
>  
> +	info->version = exynos_adc_get_version(pdev);
> +	switch (info->version) {
> +	case ADC_V1:
> +		info->ops = &exynos_adc_v1_ops;
> +		break;
> +	case ADC_V2:
> +		info->ops = &exynos_adc_v2_ops;
> +		break;
> +	default:
> +		dev_err(&pdev->dev, "failed to identify ADC version\n");
> +		return -EINVAL;
> +	};

Just drop the enum completely and assign the struct pointer directly to
driver data fields in match tables. I also suspect that the struct
should be "variant" not "ops", because it will also require other data
than function pointers, e.g. "needs_sclk".

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux