---
drivers/iio/accel/Kconfig | 12 ++
drivers/iio/accel/Makefile | 1 +
drivers/iio/accel/mma8452.c | 439 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 452 insertions(+)
create mode 100644 drivers/iio/accel/mma8452.c
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index e23e5085..1e120fa 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -65,4 +65,16 @@ config KXSD9
Say yes here to build support for the Kionix KXSD9 accelerometer.
Currently this only supports the device via an SPI interface.
+config MMA8452
+ tristate "Freescale MMA8452Q Accelerometer Driver"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for the Freescale MMA8452Q 3-axis
+ accelerometer.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mma8452.
+
endmenu
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index c48d15f..dc0e379 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_BMA180) += bma180.o
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
obj-$(CONFIG_KXSD9) += kxsd9.o
+obj-$(CONFIG_MMA8452) += mma8452.o
obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o
st_accel-y := st_accel_core.o
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
new file mode 100644
index 0000000..17aeea1
--- /dev/null
+++ b/drivers/iio/accel/mma8452.c
@@ -0,0 +1,439 @@
+/*
+ * mma8452.c - Support for Freescale MMA8452Q 3-axis 12-bit accelerometer
+ *
+ * Copyright 2014 Peter Meerwald <pmeerw@xxxxxxxxxx>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * 7-bit I2C slave address 0x1c/0x1d (pin selectable)
+ *
+ * TODO: interrupt, thresholding, orientation / freefall events, autosleep
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/delay.h>
+
+#define MMA8452_STATUS 0x00
+#define MMA8452_OUT_X 0x01 /* MSB first, 12-bit */
+#define MMA8452_OUT_Y 0x03
+#define MMA8452_OUT_Z 0x05
+#define MMA8452_WHO_AM_I 0x0d
+#define MMA8452_DATA_CFG 0x0e
+#define MMA8452_OFF_X 0x2f
+#define MMA8452_OFF_Y 0x30
+#define MMA8452_OFF_Z 0x31
+#define MMA8452_CTRL_REG1 0x2a
+#define MMA8452_CTRL_REG2 0x2b
+
+#define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
+
+#define MMA8452_CTRL_DR_MASK (BIT(5) | BIT(4) | BIT(3))
+#define MMA8452_CTRL_DR_SHIFT 3
+#define MMA8452_CTRL_DR_DEFAULT 0x4 /* 50 Hz sample frequency */
+#define MMA8452_CTRL_ACTIVE BIT(0)
+
+#define MMA8452_DATA_CFG_FS_MASK (BIT(1) | BIT(0))
+#define MMA8452_DATA_CFG_FS_2G 0
+#define MMA8452_DATA_CFG_FS_4G 1
+#define MMA8452_DATA_CFG_FS_8G 2
+
+#define MMA8452_DEVICE_ID 0x2a
+
+struct mma8452_data {
+ struct i2c_client *client;
+ struct mutex lock;
+ u8 ctrl_reg1;
+ u8 data_cfg;
+};
+
+static int mma8452_drdy(struct mma8452_data *data)
+{
+ int tries = 150;
+
+ while (tries-- > 0) {
+ int ret = i2c_smbus_read_byte_data(data->client,
+ MMA8452_STATUS);
+ if (ret < 0)
+ return ret;
+ if ((ret & MMA8452_STATUS_DRDY) == MMA8452_STATUS_DRDY)
+ return 0;
+ msleep(20);
+ }
+
+ dev_err(&data->client->dev, "data not ready\n");
+ return -EIO;
+}
+
+static int mma8452_read(struct mma8452_data *data, __be16 buf[3])
+{
+ int ret = mma8452_drdy(data);
+ if (ret < 0)
+ return ret;
+ return i2c_smbus_read_i2c_block_data(data->client,
+ MMA8452_OUT_X, 3 * sizeof(__be16), (u8 *) buf);
+}
+
+static ssize_t mma8452_show_int_plus_micros(char *buf,
+ const int (*vals)[2], int n)
+{
+ size_t len = 0;
+
+ while (n-- > 0)
+ len += scnprintf(buf + len, PAGE_SIZE - len,
+ "%d.%06d ", vals[n][0], vals[n][1]);
+
+ /* replace trailing space by newline */
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static int mma8452_get_int_plus_micros_index(const int (*vals)[2], int n,
+ int val, int val2)
+{
+ while (n-- > 0)
+ if (val == vals[n][0] && val2 == vals[n][1])
+ return n;
+
+ return -EINVAL;
+}
+
+static const int mma8452_samp_freq[8][2] = {
+ {800, 0}, {400, 0}, {200, 0}, {100, 0}, {50, 0}, {12, 500000},
+ {6, 250000}, {1, 560000}
+};
+
+static const int mma8452_scales[3][2] = {
+ {0, 977}, {0, 1953}, {0, 3906}
+};
+
+static ssize_t mma8452_show_samp_freq_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return mma8452_show_int_plus_micros(buf, mma8452_samp_freq,
+ ARRAY_SIZE(mma8452_samp_freq));
+}
+
+static ssize_t mma8452_show_scale_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return mma8452_show_int_plus_micros(buf, mma8452_scales,
+ ARRAY_SIZE(mma8452_scales));
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mma8452_show_samp_freq_avail);
+static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO,
+ mma8452_show_scale_avail, NULL, 0);
+
+static int mma8452_get_samp_freq_index(struct mma8452_data *data,
+ int val, int val2)
+{
+ return mma8452_get_int_plus_micros_index(mma8452_samp_freq,
+ ARRAY_SIZE(mma8452_samp_freq), val, val2);
+}
+
+static int mma8452_get_scale_index(struct mma8452_data *data,
+ int val, int val2)
+{
+ return mma8452_get_int_plus_micros_index(mma8452_scales,
+ ARRAY_SIZE(mma8452_scales), val, val2);
+}
+
+static int mma8452_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct mma8452_data *data = iio_priv(indio_dev);
+ __be16 buffer[3];
+ int i, ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+
+ mutex_lock(&data->lock);
+ ret = mma8452_read(data, buffer);
+ mutex_unlock(&data->lock);
+ if (ret < 0)
+ return ret;
+ *val = sign_extend32(
+ be16_to_cpu(buffer[chan->scan_index]) >> 4, 11);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ i = data->data_cfg & MMA8452_DATA_CFG_FS_MASK;
+ *val = mma8452_scales[i][0];
+ *val2 = mma8452_scales[i][1];
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ i = (data->ctrl_reg1 & MMA8452_CTRL_DR_MASK) >>
+ MMA8452_CTRL_DR_SHIFT;
+ *val = mma8452_samp_freq[i][0];
+ *val2 = mma8452_samp_freq[i][1];
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ ret = i2c_smbus_read_byte_data(data->client, MMA8452_OFF_X +
+ chan->scan_index);
+ if (ret < 0)
+ return ret;
+ *val = sign_extend32(ret, 7);
+ return IIO_VAL_INT;
+ }
+ return -EINVAL;
+}
+
+static int mma8452_standby(struct mma8452_data *data)
+{
+ return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1,
+ data->ctrl_reg1 & ~MMA8452_CTRL_ACTIVE);
+}
+
+static int mma8452_active(struct mma8452_data *data)
+{
+ return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1,
+ data->ctrl_reg1);
+}
+
+static int mma8452_change_config(struct mma8452_data *data, u8 reg, u8 val)
+{
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ /* config can only be changed when in standby */
+ ret = mma8452_standby(data);
+ if (ret < 0)
+ goto fail;
+
+ ret = i2c_smbus_write_byte_data(data->client, reg, val);
+ if (ret < 0)
+ goto fail;
+
+ ret = mma8452_active(data);
+ if (ret < 0)
+ goto fail;
+
+ ret = 0;
+fail:
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+static int mma8452_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct mma8452_data *data = iio_priv(indio_dev);
+ int i;
+
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ i = mma8452_get_samp_freq_index(data, val, val2);
+ if (i < 0)
+ return -EINVAL;
+
+ data->ctrl_reg1 &= ~MMA8452_CTRL_DR_MASK;
+ data->ctrl_reg1 |= i << MMA8452_CTRL_DR_SHIFT;
+ return mma8452_change_config(data, MMA8452_CTRL_REG1,
+ data->ctrl_reg1);
+ case IIO_CHAN_INFO_SCALE:
+ i = mma8452_get_scale_index(data, val, val2);
+ if (i < 0)
+ return -EINVAL;
+ data->data_cfg &= ~MMA8452_DATA_CFG_FS_MASK;
+ data->data_cfg |= i;
+ return mma8452_change_config(data, MMA8452_DATA_CFG,
+ data->data_cfg);
+ case IIO_CHAN_INFO_CALIBBIAS:
+ if (val < -128 || val > 127)
+ return -EINVAL;
+ return mma8452_change_config(data, MMA8452_OFF_X +
+ chan->scan_index, val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static irqreturn_t mma8452_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct mma8452_data *data = iio_priv(indio_dev);
+ u8 buffer[16]; /* 3 16-bit channels + padding + ts */
+ int ret;
+
+ ret = mma8452_read(data, (__be16 *) buffer);
+ if (ret < 0)
+ goto done;
+
+ iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+ iio_get_time_ns());
+
+done:
+ iio_trigger_notify_done(indio_dev->trig);
+ return IRQ_HANDLED;
+}
+
+#define MMA8452_CHANNEL(axis, idx) { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_CALIBBIAS), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .scan_index = idx, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 12, \
+ .storagebits = 16, \
+ .shift = 4, \
+ .endianness = IIO_BE, \
+ }, \
+}
+
+static const struct iio_chan_spec mma8452_channels[] = {
+ MMA8452_CHANNEL(X, 0),
+ MMA8452_CHANNEL(Y, 1),
+ MMA8452_CHANNEL(Z, 2),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static struct attribute *mma8452_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group mma8452_group = {
+ .attrs = mma8452_attributes,
+};
+
+static const struct iio_info mma8452_info = {
+ .attrs = &mma8452_group,
+ .read_raw = &mma8452_read_raw,
+ .write_raw = &mma8452_write_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static const unsigned long mma8452_scan_masks[] = {0x7, 0};
+
+static int mma8452_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct mma8452_data *data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
+ if (ret < 0)
+ return ret;
+ if (ret != MMA8452_DEVICE_ID)
+ return -ENODEV;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ data->client = client;
+ mutex_init(&data->lock);
+
+ i2c_set_clientdata(client, indio_dev);
+ indio_dev->info = &mma8452_info;
+ indio_dev->name = id->name;
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = mma8452_channels;
+ indio_dev->num_channels = ARRAY_SIZE(mma8452_channels);
+ indio_dev->available_scan_masks = mma8452_scan_masks;
+
+ data->ctrl_reg1 = MMA8452_CTRL_ACTIVE |
+ (MMA8452_CTRL_DR_DEFAULT << MMA8452_CTRL_DR_SHIFT);
+ ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG1,
+ data->ctrl_reg1);
+ if (ret < 0)
+ return ret;
+
+ data->data_cfg = MMA8452_DATA_CFG_FS_2G;
+ ret = i2c_smbus_write_byte_data(client, MMA8452_DATA_CFG,
+ data->data_cfg);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ mma8452_trigger_handler, NULL);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0)
+ goto buffer_cleanup;
+ return 0;
+
+buffer_cleanup:
+ iio_triggered_buffer_cleanup(indio_dev);
+ return ret;
+}
+
+static int mma8452_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
+ mma8452_standby(iio_priv(indio_dev));
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mma8452_suspend(struct device *dev)
+{
+ return mma8452_standby(iio_priv(i2c_get_clientdata(
+ to_i2c_client(dev))));
+}
+
+static int mma8452_resume(struct device *dev)
+{
+ return mma8452_active(iio_priv(i2c_get_clientdata(
+ to_i2c_client(dev))));
+}
+
+static SIMPLE_DEV_PM_OPS(mma8452_pm_ops, mma8452_suspend, mma8452_resume);
+#define MMA8452_PM_OPS (&mma8452_pm_ops)
+#else
+#define MMA8452_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id mma8452_id[] = {
+ { "mma8452", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mma8452_id);
+
+static struct i2c_driver mma8452_driver = {
+ .driver = {
+ .name = "mma8452",
+ .pm = MMA8452_PM_OPS,
+ },
+ .probe = mma8452_probe,
+ .remove = mma8452_remove,
+ .id_table = mma8452_id,
+};
+module_i2c_driver(mma8452_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Freescale MMA8452 accelerometer driver");
+MODULE_LICENSE("GPL");
