On 29/04/14 00:51, Srinivas Pandruvada wrote:
The current scan element type uses the following format:
[be|le]:[s|u]bits/storagebits[>>shift].
To specify multiple elements in this type, added a repeat value.
So new format is:
[be|le]:[s|u]bits/storagebitsXr[>>shift].
Here r is specifying how may times, real/storage bits are repeating.
When X is value is 0 or 1, then repeat value is not used in the format,
and it will be same as existing format.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
Applied to the togreg branch of iio.git
Thanks,
---
drivers/iio/industrialio-buffer.c | 41 +++++++++++++++++++++++++++++++++------
include/linux/iio/iio.h | 7 +++++++
2 files changed, 42 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index e472cff..36b1ae9 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -150,7 +150,16 @@ static ssize_t iio_show_fixed_type(struct device *dev,
type = IIO_BE;
#endif
}
- return sprintf(buf, "%s:%c%d/%d>>%u\n",
+ if (this_attr->c->scan_type.repeat > 1)
+ return sprintf(buf, "%s:%c%d/%dX%d>>%u\n",
+ iio_endian_prefix[type],
+ this_attr->c->scan_type.sign,
+ this_attr->c->scan_type.realbits,
+ this_attr->c->scan_type.storagebits,
+ this_attr->c->scan_type.repeat,
+ this_attr->c->scan_type.shift);
+ else
+ return sprintf(buf, "%s:%c%d/%d>>%u\n",
iio_endian_prefix[type],
this_attr->c->scan_type.sign,
this_attr->c->scan_type.realbits,
@@ -475,14 +484,22 @@ static int iio_compute_scan_bytes(struct iio_dev *indio_dev,
for_each_set_bit(i, mask,
indio_dev->masklength) {
ch = iio_find_channel_from_si(indio_dev, i);
- length = ch->scan_type.storagebits / 8;
+ if (ch->scan_type.repeat > 1)
+ length = ch->scan_type.storagebits / 8 *
+ ch->scan_type.repeat;
+ else
+ length = ch->scan_type.storagebits / 8;
bytes = ALIGN(bytes, length);
bytes += length;
}
if (timestamp) {
ch = iio_find_channel_from_si(indio_dev,
indio_dev->scan_index_timestamp);
- length = ch->scan_type.storagebits / 8;
+ if (ch->scan_type.repeat > 1)
+ length = ch->scan_type.storagebits / 8 *
+ ch->scan_type.repeat;
+ else
+ length = ch->scan_type.storagebits / 8;
bytes = ALIGN(bytes, length);
bytes += length;
}
@@ -959,7 +976,11 @@ static int iio_buffer_update_demux(struct iio_dev *indio_dev,
indio_dev->masklength,
in_ind + 1);
ch = iio_find_channel_from_si(indio_dev, in_ind);
- length = ch->scan_type.storagebits/8;
+ if (ch->scan_type.repeat > 1)
+ length = ch->scan_type.storagebits / 8 *
+ ch->scan_type.repeat;
+ else
+ length = ch->scan_type.storagebits / 8;
/* Make sure we are aligned */
in_loc += length;
if (in_loc % length)
@@ -971,7 +992,11 @@ static int iio_buffer_update_demux(struct iio_dev *indio_dev,
goto error_clear_mux_table;
}
ch = iio_find_channel_from_si(indio_dev, in_ind);
- length = ch->scan_type.storagebits/8;
+ if (ch->scan_type.repeat > 1)
+ length = ch->scan_type.storagebits / 8 *
+ ch->scan_type.repeat;
+ else
+ length = ch->scan_type.storagebits / 8;
if (out_loc % length)
out_loc += length - out_loc % length;
if (in_loc % length)
@@ -992,7 +1017,11 @@ static int iio_buffer_update_demux(struct iio_dev *indio_dev,
}
ch = iio_find_channel_from_si(indio_dev,
indio_dev->scan_index_timestamp);
- length = ch->scan_type.storagebits/8;
+ if (ch->scan_type.repeat > 1)
+ length = ch->scan_type.storagebits / 8 *
+ ch->scan_type.repeat;
+ else
+ length = ch->scan_type.storagebits / 8;
if (out_loc % length)
out_loc += length - out_loc % length;
if (in_loc % length)
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 5629c92..ccde917 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -177,6 +177,12 @@ struct iio_event_spec {
* shift: Shift right by this before masking out
* realbits.
* endianness: little or big endian
+ * repeat: Number of times real/storage bits
+ * repeats. When the repeat element is
+ * more than 1, then the type element in
+ * sysfs will show a repeat value.
+ * Otherwise, the number of repetitions is
+ * omitted.
* @info_mask_separate: What information is to be exported that is specific to
* this channel.
* @info_mask_shared_by_type: What information is to be exported that is shared
@@ -219,6 +225,7 @@ struct iio_chan_spec {
u8 realbits;
u8 storagebits;
u8 shift;
+ u8 repeat;
enum iio_endian endianness;
} scan_type;
long info_mask_separate;
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
