On 10/05/2013 11:39 AM, leroy christophe wrote:
>
> Le 05/10/2013 11:35, Lars-Peter Clausen a écrit :
>> On 10/05/2013 11:18 AM, leroy christophe wrote:
>>> Le 05/10/2013 10:41, Lars-Peter Clausen a écrit :
>>>> On 10/05/2013 10:21 AM, Christophe Leroy wrote:
>>>>> + .consumer_channel = "channel_0",
>>>>> + .adc_channel_label = "0",
>>>>> + },
>>>>> + {
>>>>> + .consumer_dev_name = AD7923_NAME,
>>>>> + .consumer_channel = "channel_1",
>>>>> + .adc_channel_label = "1",
>>>>> + },
>>>>> + {
>>>>> + .consumer_dev_name = AD7923_NAME,
>>>>> + .consumer_channel = "channel_2",
>>>>> + .adc_channel_label = "2",
>>>>> + },
>>>>> + {
>>>>> + .consumer_dev_name = AD7923_NAME,
>>>>> + .consumer_channel = "channel_3",
>>>>> + .adc_channel_label = "3",
>>>>> + },
>>>>> + { }
>>>>> +};
>>>> This is a mapping between channel names of the provider between the channel
>>>> names of the consumer. So it is specific to a certain combination of
>>>> consumer and provider and usually depend on how things are physically wired
>>>> on your board. As such there can be no generic mapping and this needs to go
>>>> into your machine/board driver. The mapping is usually passed to the IIO
>>>> driver via its platform data.
>>>>
>>>> So e.g. imagine you have a provider like this driver and you have a
>>>> consumer
>>>> that has a "voltage" channel. And on your board channel 3 of the ADC is
>>>> what
>>>> you want to route to that consumer. Then your mapping would look like this:
>>>>
>>>> {
>>>> .consumer_dev_name = "your_consumer_device.1",
>>>> .consumer_channel = "voltage",
>>>> .adc_channel_label = "AIN3",
>>>> }
>>>>
>>>> And in your consumer driver you'd do:
>>>>
>>>> channel = iio_channel_get(dev, "voltage");
>>>>
>>>>
>>> Thanks for the explanation.
>>>
>>> Can the mapping be retrieved via of_platform ?
>>>
>>> Indeed, the only exemple I found was in the lp8788_adc driver, which
>>> includes iio/machine.h and declares a default mapping, but it is based on
>>> platform_data, not of_platform.
>>>
>> If you are using device tree you can specify the mapping inside the
>> devicetree. Have a look at
>> Documentation/devicetree/bindings/iio/iio-bindings.txt
>>
>>
> Yes, I saw that. Is there anything that shall be done in the driver to
> support it, or is it automatic ?
It should work out of the box. Just make sure to set the #io-channel-cells
property for the ADC device node in the devicetree.
- Lars
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
