Use the spi_sync_transfer() helper function instead of open-coding it. Makes
the code a bit shorter.
Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
---
drivers/iio/gyro/adxrs450.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/iio/gyro/adxrs450.c b/drivers/iio/gyro/adxrs450.c
index c1f40ef..1e546ba 100644
--- a/drivers/iio/gyro/adxrs450.c
+++ b/drivers/iio/gyro/adxrs450.c
@@ -90,7 +90,6 @@ static int adxrs450_spi_read_reg_16(struct iio_dev *indio_dev,
u8 reg_address,
u16 *val)
{
- struct spi_message msg;
struct adxrs450_state *st = iio_priv(indio_dev);
u32 tx;
int ret;
@@ -114,10 +113,7 @@ static int adxrs450_spi_read_reg_16(struct iio_dev *indio_dev,
tx |= ADXRS450_P;
st->tx = cpu_to_be32(tx);
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
+ ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
if (ret) {
dev_err(&st->us->dev, "problem while reading 16 bit register 0x%02x\n",
reg_address);
@@ -169,7 +165,6 @@ static int adxrs450_spi_write_reg_16(struct iio_dev *indio_dev,
**/
static int adxrs450_spi_sensor_data(struct iio_dev *indio_dev, s16 *val)
{
- struct spi_message msg;
struct adxrs450_state *st = iio_priv(indio_dev);
int ret;
struct spi_transfer xfers[] = {
@@ -188,10 +183,7 @@ static int adxrs450_spi_sensor_data(struct iio_dev *indio_dev, s16 *val)
mutex_lock(&st->buf_lock);
st->tx = cpu_to_be32(ADXRS450_SENSOR_DATA);
- spi_message_init(&msg);
- spi_message_add_tail(&xfers[0], &msg);
- spi_message_add_tail(&xfers[1], &msg);
- ret = spi_sync(st->us, &msg);
+ ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
if (ret) {
dev_err(&st->us->dev, "Problem while reading sensor data\n");
goto error_ret;
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
