Hello all, Thank you for your advices. I have revised some minor issues of v4 revision. This patch is the fifth revision for Capella CM36651 proximity and RGB light sensor driver. The driver exposes five channnels: Red, Green, Clear and proximity. It also support detection proximity event. This dricer supports: - Event: rising and falling proximity events. - Reading channel through read_raw callback. - Writing sensor data integration time each channel through write_raw callback. v5 changed below: - Use *_REG_NUM macro at size of array. - Revise error handling in probe function. Subject: [PATCH 0/2] *** SUBJECT HERE *** *** BLURB HERE *** Beomho Seo (2): iio: cm36651: Add CM36651 proximity light/sensor driver DT: Add documentation for cm36651 proximity/light sensor .../devicetree/bindings/iio/light/cm36651.txt | 26 + .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/iio/light/Kconfig | 11 + drivers/iio/light/cm36651.c | 706 ++++++++++++++++++++ 4 files changed, 744 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/cm36651.txt create mode 100644 drivers/iio/light/cm36651.c -- 1.7.9.5 -- Best Regards, Beomho Seo, Assistant Engineer System S/W Lab., S/W Platform Team, Software Center Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
