Hi Jonathan, Hopefully I've covered all of your points in this new set. This patch-set includes a few clean-ups surrounding error handling and non-mandatory functionality along with regulator support and the addition of a new pressure/temperature sensor (LPS001WP). Everything has been tested with Device Tree. v2: - Rebased onto Linux -next as requested by Jonathan - Reworked clean-up patch to address Jonathan's concerns - Added binding document (inc regulators) - Extended regulator support in the driver - Re-worked Data Ready pin handling v3: - Standardise sensor names: <model>_<sensor-type> - Added error handling clean-ups - More binding documents; for magn, accel and gyro - Message on successful sensor bring-up; for press, magn, accel and gyro - More device enablement for ux500 by way of CONFIGs - New neat reorder/grouping of patches v4: - Remove "registered" prints - Remove *_<dev_name> appends - Fix patch mangle - CC DT ML on bindings - Realisation that we're using a different Accel & Magn chip - Move (irq > 0) back into the error path - Squash CONFIG enablement into one patch Documentation/devicetree/bindings/iio/accel/lsm303dlhc.txt | 21 +++++++++++++ Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt | 21 +++++++++++++ Documentation/devicetree/bindings/iio/magnetometer/lsm303dlhc.txt | 21 +++++++++++++ Documentation/devicetree/bindings/iio/pressure/lps001wp.txt | 21 +++++++++++++ arch/arm/boot/dts/ste-dbx5x0.dtsi | 5 ---- arch/arm/boot/dts/ste-snowball.dts | 34 +++++++++++++++++++++ arch/arm/configs/u8500_defconfig | 5 ++++ drivers/iio/accel/st_accel_core.c | 19 ++++++------ drivers/iio/common/st_sensors/st_sensors_core.c | 50 ++++++++++++++++++------------- drivers/iio/gyro/st_gyro_core.c | 19 ++++++------ drivers/iio/magnetometer/st_magn_core.c | 19 ++++++------ drivers/iio/pressure/st_pressure.h | 1 + drivers/iio/pressure/st_pressure_core.c | 154 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------- drivers/iio/pressure/st_pressure_i2c.c | 1 + include/linux/iio/common/st_sensors.h | 5 ++++ 15 files changed, 329 insertions(+), 67 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
