Hi Marek, On Wednesday 04 September 2013 16:06:34 Marek Vasut wrote: > [...] > > +# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE (1 << 23) > > +# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE (1 << 22) > > +# define LRADC_CTRL0_MX28_YNNSW /* YM */ (1 << 21) > > +# define LRADC_CTRL0_MX28_YPNSW /* YP */ (1 << 20) > > +# define LRADC_CTRL0_MX28_YPPSW /* YP */ (1 << 19) > > +# define LRADC_CTRL0_MX28_XNNSW /* XM */ (1 << 18) > > +# define LRADC_CTRL0_MX28_XNPSW /* XM */ (1 << 17) > > +# define LRADC_CTRL0_MX28_XPPSW /* XP */ (1 << 16) > > Why do you put this space between # and define? Matter of taste: to visible show a difference between registers itself and their bits inside. Its my default state to help readers to read my code. > > [...] > > #define LRADC_CTRL1 0x10 > > #define LRADC_CTRL1_TOUCH_DETECT_IRQ_EN (1 << 24) > > #define LRADC_CTRL1_LRADC_IRQ_EN(n) (1 << ((n) + 16)) > > -#define LRADC_CTRL1_LRADC_IRQ_EN_MASK (0x1fff << 16) > > +#define LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK (0x1fff << 16) > > #define LRADC_CTRL1_LRADC_IRQ_EN_OFFSET 16 > > #define LRADC_CTRL1_TOUCH_DETECT_IRQ (1 << 8) > > #define LRADC_CTRL1_LRADC_IRQ(n) (1 << (n)) > > -#define LRADC_CTRL1_LRADC_IRQ_MASK 0x1fff > > +#define LRADC_CTRL1_MX28_LRADC_IRQ_MASK 0x1fff > > MIght just be easier to define this as > > LRADC....IRQ_MASK(id) (((id) == MX23) ? 0x1ff : 0x1fff) > > just like the MXS SSP driver does it. Then there won't be so much churn. Nice. Will change it. Regards, Juergen -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | http://www.pengutronix.de/ | -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
