> + Lee Jones in the loop. I missed out on these because they weren't sent to LKML. Please ensure you always CC any patches due for Mainline there too. I have some things to say about these patches, but can't as they're not in my inbox. When you send them again, can you CC both LKML and myself please? > On 07/02/2013 02:15 PM, Lukasz Czerwinski wrote: > > Hi, > > > > This is the patchset that adds device tree and event subsytem support > > for generic st_common library. > > > > I tested our patches with Exynos4x12 board. We tested sensors: > > - LSM330DLC accelerometer and gyroscope (I2C) > > - LPS331AP pressure sensor (I2C) > > > > Generally it works fine. > > I couldn't implement event patch for lsm330dlc gyroscope because I > > don't have connected INT1 pin to SoC. > > > > My implementation allows to use event system or triggered buffer by > > proper declaration of irqs in device tree/platform data. > > > > Jacek Anaszewski (1): > > iio: lps331ap: Add support for DT > > > > Lukasz Czerwinski (3): > > iio: st_sensors: Add DT bindings for st_accel and st_gyro > > iio: st_sensors: Add threshold events support > > iio: accel: Add event subsystem to st_accel driver > > > > .../bindings/iio/accelerometer/st_accel.txt | 54 +++++ > > .../devicetree/bindings/iio/gyroscope/st_gyro.txt | 51 +++++ > > .../bindings/iio/pressure/st_pressure.txt | 41 ++++ > > drivers/iio/accel/st_accel.h | 19 +- > > drivers/iio/accel/st_accel_core.c | 159 +++++++++++++- > > drivers/iio/accel/st_accel_i2c.c | 19 +- > > drivers/iio/accel/st_accel_spi.c | 19 +- > > drivers/iio/common/st_sensors/st_sensors_core.c | 225 +++++++++++++++++++- > > drivers/iio/common/st_sensors/st_sensors_i2c.c | 59 ++++- > > drivers/iio/common/st_sensors/st_sensors_spi.c | 59 ++++- > > drivers/iio/gyro/st_gyro.h | 15 +- > > drivers/iio/gyro/st_gyro_core.c | 8 +- > > drivers/iio/gyro/st_gyro_i2c.c | 18 +- > > drivers/iio/gyro/st_gyro_spi.c | 18 +- > > drivers/iio/magnetometer/st_magn.h | 3 +- > > drivers/iio/magnetometer/st_magn_core.c | 5 +- > > drivers/iio/magnetometer/st_magn_i2c.c | 2 +- > > drivers/iio/magnetometer/st_magn_spi.c | 2 +- > > drivers/iio/pressure/st_pressure.h | 3 +- > > drivers/iio/pressure/st_pressure_core.c | 12 +- > > drivers/iio/pressure/st_pressure_i2c.c | 11 +- > > drivers/iio/pressure/st_pressure_spi.c | 11 +- > > include/linux/iio/common/st_sensors.h | 88 +++++++- > > include/linux/platform_data/st_sensors_pdata.h | 2 + > > 24 files changed, 837 insertions(+), 66 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/iio/accelerometer/st_accel.txt > > create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/st_gyro.txt > > create mode 100644 Documentation/devicetree/bindings/iio/pressure/st_pressure.txt > > -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
