The following changes since commit 36e607a16b8def1b184d48a4489b716d6dbe3379:
staging: lustre: remove ll_crypto_alloc_blkcipher (2013-08-03 14:44:31 +0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-3.12a
for you to fetch changes up to cd6fe06588423ff4cca85c85c4402027b04dccf1:
staging:iio:hmc5843: Use i2c_smbus_read_word_swapped() (2013-08-04 11:22:55 +0100)
----------------------------------------------------------------
First round of new IIO drivers, features and cleanups for the 3.12 cycle.
There has been a lot of good work going into IIO recently, some of which
missed this pull request purely because I haven't caught up with all my
emails.
Core changes
1) Introduction of devm_iio_device_alloc/free and conversions of lots of
drivers (37 + patches so far mostly from Sachin)
2) A Kconfig option to enabled some debug logging subsystem wide.
New drivers
1) Nuvoton NAU7802 adc driver
2) Avago APDS9300 ambient light sensor driver.
Staging graduations
1) ADIS16260 gyroscope (after a lot fo cleaning up from Lars-Peter)
New driver features
1) ST-sensors gain control of which pin is used for dataready.
2) mcp4725 gains eeprom saving (a later fix deals with a wrong return type
bug in that patch)
3) A number of drivers have gained module alias' to aid autoloading.
Cleanups and minor bug fixes.
1) A number of typos in Kconfig comments
2) Drop remaining mentions of ring buffers (now just buffers)
3) Overrestrictive i2c function checking in the invensense mpu6050 driver
4) Some help text clarifications.
5) store_eeprom is now used in several drivers so move to generic abi docs.
6) Update dac power down options.
7) Add some error handlign to mxs-lradc on stmp_reset_block call.
8) Lars fixed the alphabetical order in various files and added comments
to try and prevent them getting messed up again.
9) Dropped some remaining 'reset' attributes for drivers. We have never
seen a reason why these should be available. Finally the macro
used to define many of these has gone.
10) lps331ap gets an easier to check temperature scale implementation.
11) Various cleanups for the hmc5843 from Peter with a view to getting
it ready for a staging graduation.
Quite a few other little typo fixes etc.
----------------------------------------------------------------
Alexander Holler (4):
iio: hid-sensor-accel-3d: add module alias for autoload
iio: hid-sensor-gyro-3d: add module alias for autoload
iio: hid-sensor-als: add module alias for autoload
iio: hid-sensor-magn-3d: add module alias for autoload
Alexandre Belloni (1):
iio: Add Nuvoton NAU7802 ADC driver
Denis CIOCCA (1):
iio: Added ST-sensors platform data to select the DRDY interrupt pin
Fabio Estevam (1):
iio: mxs-lradc: Check the return value from stmp_reset_block()
Grygorii Strashko (1):
iio: core: implement devm_iio_device_alloc/devm_iio_device_free
Jacek Anaszewski (1):
iio: lps331ap: Modify in_temp_scale calculation way
Jonathan Cameron (1):
iio:dac:mcp4725 wrong return type of attribute _show function
Lars-Peter Clausen (20):
iio: Add a comment to about alphabetical order to Kconfigs and Makefiles
staging:iio:ad2s1210: Don't expose the chip reset to userspace
staging:iio:adt7316: Don't expose the chip reset to userspace
staging:iio:ade7xxx: Don't expose the chip reset to userspace
iio: Remove IIO_DEV_ATTR_RESET macro
staging:iio:adis16260: Fix reading calibscale
staging:iio:adis16260: Drop unused 'negate' property
staging:iio:adis16260: Remove support for orientation mapping
staging:iio:adis16260: Don't set default scan mask
staging:iio:adis16260: Remove separate header
staging:iio:adis16260: Add value range check for calibscale/-bias
staging:iio:adis16260: Use sign_extend32() instead of open-coding it
staging:iio:adis16260: Simplify calibscale and caliboffset reading
staging:iio:adis16260: Fix minor style issue
staging:iio:adis16260: Remove 'SPS' suffix from samplerate attribute
staging:iio:adis16260: Add scale for the inclination channel
staging:iio:adis16260: Remove unused includes
staging:iio:adis16260: Add proper range checks to write_frequency()
staging:iio:adis16260: Remove sampling_frequency_available attribute
staging:iio:adis16260: Move out of staging
Oleksandr Kravchenko (4):
of: Add Avago Technologies vendor prefix
iio: add APDS9300 ambilent light sensor driver
Documentation: devres: add IIO device alloc/free functions to list
iio: core: Avoid double minus in sysfs output
Otavio Salvador (1):
iio: add configuration option for debug support
Peter Meerwald (24):
iio: fix typos in dac Kconfig
iio: use I2C_FUNC_SMBUS_I2C_BLOCK macro
iio: fix Kconfig typos
iio: remove mention of ring buffer from CONFIG_IIO_KFIFO_BUF, CONFIG_IIO_TRIGGER description
iio: reword help text of several IIO_ST drivers
iio: add store_eeprom to mcp4725 dac driver
iio: add powerdown to mcp4725 dac drive
iio: add DAC 500kohm_to_gnd to possible powerdown_modes
iio: move ABI specification for store_eeprom; is used by ad9523, mcp4725 and ds1077 devices
iio: staging: fix device.txt documentation
iio: fix typo, Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
iio: staging: fix typo in ade758_ring.c
iio: fix semicolon in io_core_trigger.h
iio:adjd_s311: Use devm_iio_device_alloc
iio:vcnl4000: Use devm_iio_device_alloc
iio:mcp4725: Use devm_iio_device_alloc
iio: Fix documentation of devm_iio_device_free()
staging:iio:hmc5843: Drop I2C detection code
staging:iio:hmc5843: Remove id register #defines, not used anymore
staging:iio:hmc5843: Implement timeout in read function
staging:iio:hmc5843: 'add' is a poor abbreviation for address
staging:iio:hmc5843: Device has 3 channels, no need to store separately
staging:iio:hmc5843: Drop unneeded #includes
staging:iio:hmc5843: Use i2c_smbus_read_word_swapped()
Sachin Kamat (36):
iio: adc: ad7266: Use devm_* APIs
iio: adc: ad7298: Use devm_* APIs
iio: adc: ad7476: Use devm_* APIs
iio: adc: ad7791: Use devm_* APIs
iio: adc: ad7793: Use devm_* APIs
iio: adc: ad7887: Use devm_* APIs
iio: adc: ad7923: Use devm_* APIs
iio: adc: lp8788_adc: Use devm_* APIs
iio: adc: mcp320x: Use devm_* APIs
iio: adc: nau7802: Use devm_iio_device_alloc
iio: adc: ti-adc081c: Use devm_* APIs
iio: adc: viperboard_adc: Use devm_iio_device_alloc
iio: at91: Use devm_iio_device_alloc
iio: exynos_adc: Use devm_iio_device_alloc
iio: max1363: Use devm_iio_device_alloc
iio: frequency: adf4350: Use devm_* APIs
staging: iio: mxs-lradc: Use devm_iio_device_alloc
staging: iio: spear_adc: Use devm_iio_device_alloc
staging: iio: light: isl29018: Use devm_iio_device_alloc
staging: iio: light: isl29028: Use devm_iio_device_alloc
iio: hid-sensor-accel-3d: Use devm_iio_device_alloc
iio: accel: kxsd9: Use devm_iio_device_alloc
iio: accel: st_accel: Use devm_iio_device_alloc
iio: adc: ti_am335x_adc: Use devm_iio_device_alloc
iio: adc: Update ti_am335x_adc Kconfig entry
iio: magnetometer: hid-sensor-magn-3d: Use devm_iio_device_alloc
iio: magnetometer: st_magn: Use devm_iio_device_alloc
iio: imu: adis16400: Use devm_iio_device_alloc
iio: imu: adis16480: Use devm_iio_device_alloc
iio: imu: inv_mpu6050: Use devm_iio_device_alloc
iio: light: hid-sensor-als: Use devm_iio_device_alloc
iio: light: lm3533-als: Use devm_iio_device_alloc
iio: light: tsl2563: Use devm_* APIs
iio: amplifiers: ad8366: Use devm_* APIs
iio: frequency: ad9523: Use devm_* APIs
iio: pressure: st_pressure: Use devm_iio_device_alloc
Documentation/ABI/testing/sysfs-bus-iio | 9 +
.../ABI/testing/sysfs-bus-iio-frequency-ad9523 | 8 -
.../ABI/testing/sysfs-bus-iio-frequency-adf4350 | 2 +-
.../bindings/iio/adc/nuvoton-nau7802.txt | 18 +
.../devicetree/bindings/iio/light/apds9300.txt | 22 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
Documentation/driver-model/devres.txt | 4 +
drivers/iio/Kconfig | 14 +-
drivers/iio/Makefile | 2 +
drivers/iio/accel/Kconfig | 20 +-
drivers/iio/accel/Makefile | 4 +-
drivers/iio/accel/hid-sensor-accel-3d.c | 35 +-
drivers/iio/accel/kxsd9.c | 17 +-
drivers/iio/accel/st_accel.h | 11 +-
drivers/iio/accel/st_accel_core.c | 28 +-
drivers/iio/accel/st_accel_i2c.c | 17 +-
drivers/iio/accel/st_accel_spi.c | 17 +-
drivers/iio/adc/Kconfig | 47 +-
drivers/iio/adc/Makefile | 2 +
drivers/iio/adc/ad7266.c | 16 +-
drivers/iio/adc/ad7298.c | 24 +-
drivers/iio/adc/ad7476.c | 26 +-
drivers/iio/adc/ad7791.c | 19 +-
drivers/iio/adc/ad7793.c | 23 +-
drivers/iio/adc/ad7887.c | 23 +-
drivers/iio/adc/ad7923.c | 20 +-
drivers/iio/adc/at91_adc.c | 23 +-
drivers/iio/adc/exynos_adc.c | 23 +-
drivers/iio/adc/lp8788_adc.c | 7 +-
drivers/iio/adc/max1363.c | 15 +-
drivers/iio/adc/mcp320x.c | 18 +-
drivers/iio/adc/nau7802.c | 581 +++++++++++++++++++++
drivers/iio/adc/ti-adc081c.c | 18 +-
drivers/iio/adc/ti_am335x_adc.c | 13 +-
drivers/iio/adc/viperboard_adc.c | 9 +-
drivers/iio/amplifiers/Kconfig | 2 +
drivers/iio/amplifiers/Makefile | 1 +
drivers/iio/amplifiers/ad8366.c | 13 +-
drivers/iio/common/Makefile | 1 +
drivers/iio/common/st_sensors/st_sensors_core.c | 41 +-
drivers/iio/dac/Kconfig | 44 +-
drivers/iio/dac/Makefile | 1 +
drivers/iio/dac/mcp4725.c | 177 ++++++-
drivers/iio/frequency/Kconfig | 1 +
drivers/iio/frequency/Makefile | 1 +
drivers/iio/frequency/ad9523.c | 17 +-
drivers/iio/frequency/adf4350.c | 31 +-
drivers/iio/gyro/Kconfig | 18 +-
drivers/iio/gyro/Makefile | 2 +
.../gyro/adis16260_core.c => iio/gyro/adis16260.c} | 305 +++++------
drivers/iio/gyro/hid-sensor-gyro-3d.c | 16 +-
drivers/iio/gyro/st_gyro.h | 11 +-
drivers/iio/gyro/st_gyro_core.c | 13 +-
drivers/iio/gyro/st_gyro_i2c.c | 3 +-
drivers/iio/gyro/st_gyro_spi.c | 3 +-
drivers/iio/iio_core_trigger.h | 7 +-
drivers/iio/imu/Kconfig | 2 +
drivers/iio/imu/Makefile | 1 +
drivers/iio/imu/adis16400_core.c | 10 +-
drivers/iio/imu/adis16480.c | 10 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 29 +-
drivers/iio/industrialio-core.c | 51 +-
drivers/iio/light/Kconfig | 34 +-
drivers/iio/light/Makefile | 4 +-
drivers/iio/light/adjd_s311.c | 15 +-
drivers/iio/light/apds9300.c | 512 ++++++++++++++++++
drivers/iio/light/hid-sensor-als.c | 33 +-
drivers/iio/light/lm3533-als.c | 7 +-
drivers/iio/light/tsl2563.c | 25 +-
drivers/iio/light/vcnl4000.c | 16 +-
drivers/iio/magnetometer/Kconfig | 6 +-
drivers/iio/magnetometer/Makefile | 1 +
drivers/iio/magnetometer/hid-sensor-magn-3d.c | 35 +-
drivers/iio/magnetometer/st_magn.h | 3 +-
drivers/iio/magnetometer/st_magn_core.c | 6 +-
drivers/iio/magnetometer/st_magn_i2c.c | 17 +-
drivers/iio/magnetometer/st_magn_spi.c | 17 +-
drivers/iio/pressure/Kconfig | 14 +-
drivers/iio/pressure/Makefile | 1 +
drivers/iio/pressure/st_pressure.h | 11 +-
drivers/iio/pressure/st_pressure_core.c | 21 +-
drivers/iio/pressure/st_pressure_i2c.c | 17 +-
drivers/iio/pressure/st_pressure_spi.c | 17 +-
drivers/iio/trigger/Kconfig | 4 +-
drivers/iio/trigger/Makefile | 1 +
drivers/staging/iio/Documentation/device.txt | 4 +-
drivers/staging/iio/adc/mxs-lradc.c | 33 +-
drivers/staging/iio/adc/spear_adc.c | 30 +-
drivers/staging/iio/addac/adt7316.c | 27 -
drivers/staging/iio/gyro/Kconfig | 12 -
drivers/staging/iio/gyro/Makefile | 3 -
drivers/staging/iio/gyro/adis16260.h | 98 ----
drivers/staging/iio/gyro/adis16260_platform_data.h | 19 -
drivers/staging/iio/light/isl29018.c | 16 +-
drivers/staging/iio/light/isl29028.c | 13 +-
drivers/staging/iio/magnetometer/hmc5843.c | 71 +--
drivers/staging/iio/meter/ade7753.c | 18 -
drivers/staging/iio/meter/ade7754.c | 19 -
drivers/staging/iio/meter/ade7758_core.c | 18 -
drivers/staging/iio/meter/ade7758_ring.c | 2 +-
drivers/staging/iio/meter/ade7759.c | 18 -
drivers/staging/iio/meter/ade7854.c | 19 -
drivers/staging/iio/resolver/ad2s1210.c | 18 -
include/linux/iio/common/st_sensors.h | 14 +-
include/linux/iio/iio.h | 25 +
include/linux/iio/sysfs.h | 5 -
include/linux/platform_data/st_sensors_pdata.h | 24 +
107 files changed, 2126 insertions(+), 1144 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt
create mode 100644 Documentation/devicetree/bindings/iio/light/apds9300.txt
create mode 100644 drivers/iio/adc/nau7802.c
rename drivers/{staging/iio/gyro/adis16260_core.c => iio/gyro/adis16260.c} (53%)
create mode 100644 drivers/iio/light/apds9300.c
delete mode 100644 drivers/staging/iio/gyro/adis16260.h
delete mode 100644 drivers/staging/iio/gyro/adis16260_platform_data.h
create mode 100644 include/linux/platform_data/st_sensors_pdata.h
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
