Keeping Makefile and Kconfig entries in alphabetical order usually works better than just appending new entries at the end, since it reduces the amount of conflicts. This patch adds a comment to the IIO Kconfig and Makefile files to document that the entries should be kept in alphabetical order. Also reorder those entries which weren't in alphabetical order yet. Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx> --- drivers/iio/accel/Kconfig | 16 +++++++++------- drivers/iio/accel/Makefile | 4 ++-- drivers/iio/adc/Kconfig | 36 +++++++++++++++++++----------------- drivers/iio/adc/Makefile | 1 + drivers/iio/amplifiers/Kconfig | 2 ++ drivers/iio/amplifiers/Makefile | 1 + drivers/iio/common/Makefile | 1 + drivers/iio/dac/Kconfig | 38 ++++++++++++++++++++------------------ drivers/iio/dac/Makefile | 1 + drivers/iio/frequency/Kconfig | 1 + drivers/iio/frequency/Makefile | 1 + drivers/iio/gyro/Kconfig | 2 ++ drivers/iio/gyro/Makefile | 1 + drivers/iio/imu/Kconfig | 2 ++ drivers/iio/imu/Makefile | 1 + drivers/iio/light/Kconfig | 24 +++++++++++++----------- drivers/iio/light/Makefile | 3 ++- drivers/iio/magnetometer/Kconfig | 2 ++ drivers/iio/magnetometer/Makefile | 1 + drivers/iio/pressure/Kconfig | 2 ++ drivers/iio/pressure/Makefile | 1 + drivers/iio/trigger/Kconfig | 2 ++ drivers/iio/trigger/Makefile | 1 + 23 files changed, 88 insertions(+), 56 deletions(-) diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index a002675..61ca7ec 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -1,6 +1,8 @@ # # Accelerometer drivers # +# When adding new entries keep the list in alphabetical order + menu "Accelerometers" config HID_SENSOR_ACCEL_3D @@ -14,13 +16,6 @@ config HID_SENSOR_ACCEL_3D Say yes here to build support for the HID SENSOR accelerometers 3D. -config KXSD9 - tristate "Kionix KXSD9 Accelerometer Driver" - depends on SPI - help - Say yes here to build support for the Kionix KXSD9 accelerometer. - Currently this only supports the device via an SPI interface. - config IIO_ST_ACCEL_3AXIS tristate "STMicroelectronics accelerometers 3-Axis Driver" depends on (I2C || SPI_MASTER) && SYSFS @@ -51,4 +46,11 @@ config IIO_ST_ACCEL_SPI_3AXIS depends on IIO_ST_ACCEL_3AXIS depends on IIO_ST_SENSORS_SPI +config KXSD9 + tristate "Kionix KXSD9 Accelerometer Driver" + depends on SPI + help + Say yes here to build support for the Kionix KXSD9 accelerometer. + Currently this only supports the device via an SPI interface. + endmenu diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 87d8fa2..2f95a3d 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -2,7 +2,9 @@ # Makefile for industrial I/O accelerometer drivers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o +obj-$(CONFIG_KXSD9) += kxsd9.o obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o st_accel-y := st_accel_core.o @@ -10,5 +12,3 @@ st_accel-$(CONFIG_IIO_BUFFER) += st_accel_buffer.o obj-$(CONFIG_IIO_ST_ACCEL_I2C_3AXIS) += st_accel_i2c.o obj-$(CONFIG_IIO_ST_ACCEL_SPI_3AXIS) += st_accel_spi.o - -obj-$(CONFIG_KXSD9) += kxsd9.o diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 2eced9d..dd6bd1b 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -1,6 +1,8 @@ # # ADC drivers # +# When adding new entries keep the list in alphabetical order + menu "Analog to digital converters" config AD_SIGMA_DELTA @@ -30,17 +32,20 @@ config AD7298 To compile this driver as a module, choose M here: the module will be called ad7298. -config AD7923 - tristate "Analog Devices AD7923 and similar ADCs driver" +config AD7476 + tristate "Analog Devices AD7476 and similar 1-channel ADCs driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - Say yes here to build support for Analog Devices - AD7904, AD7914, AD7923, AD7924 4 Channel ADCs. + Say yes here to build support for Analog Devices AD7273, AD7274, AD7276, + AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, + AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC). + + If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the - module will be called ad7923. + module will be called ad7476. config AD7791 tristate "Analog Devices AD7791 ADC driver" @@ -66,33 +71,30 @@ config AD7793 To compile this driver as a module, choose M here: the module will be called AD7793. -config AD7476 - tristate "Analog Devices AD7476 and similar 1-channel ADCs driver" +config AD7887 + tristate "Analog Devices AD7887 ADC driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - Say yes here to build support for Analog Devices AD7273, AD7274, AD7276, - AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, - AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC). - + Say yes here to build support for Analog Devices + AD7887 SPI analog to digital converter (ADC). If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the - module will be called ad7476. + module will be called ad7887. -config AD7887 - tristate "Analog Devices AD7887 ADC driver" +config AD7923 + tristate "Analog Devices AD7923 and similar ADCs driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices - AD7887 SPI analog to digital converter (ADC). - If unsure, say N (but it's safe to say "Y"). + AD7904, AD7914, AD7923, AD7924 4 Channel ADCs. To compile this driver as a module, choose M here: the - module will be called ad7887. + module will be called ad7923. config AT91_ADC tristate "Atmel AT91 ADC" diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index d184139..2a4324e 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -2,6 +2,7 @@ # Makefile for IIO ADC drivers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o obj-$(CONFIG_AD7266) += ad7266.o obj-$(CONFIG_AD7298) += ad7298.o diff --git a/drivers/iio/amplifiers/Kconfig b/drivers/iio/amplifiers/Kconfig index 05d707e..e9c5f2c 100644 --- a/drivers/iio/amplifiers/Kconfig +++ b/drivers/iio/amplifiers/Kconfig @@ -1,6 +1,8 @@ # # Gain Amplifiers, etc. # +# When adding new entries keep the list in alphabetical order + menu "Amplifiers" config AD8366 diff --git a/drivers/iio/amplifiers/Makefile b/drivers/iio/amplifiers/Makefile index a6ca366..8da4b78 100644 --- a/drivers/iio/amplifiers/Makefile +++ b/drivers/iio/amplifiers/Makefile @@ -2,4 +2,5 @@ # Makefile iio/amplifiers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_AD8366) += ad8366.o diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile index c2352be..3112df0 100644 --- a/drivers/iio/common/Makefile +++ b/drivers/iio/common/Makefile @@ -6,5 +6,6 @@ # instead of duplicating in each module. # +# When adding new entries keep the list in alphabetical order obj-y += hid-sensors/ obj-y += st_sensors/ diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index b9fd4c7..3c6a78a 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -1,6 +1,8 @@ # # DAC drivers # +# When adding new entries keep the list in alphabetical order + menu "Digital to analog converters" config AD5064 @@ -48,13 +50,6 @@ config AD5421 To compile this driver as module choose M here: the module will be called ad5421. -config AD5624R_SPI - tristate "Analog Devices AD5624/44/64R DAC spi driver" - depends on SPI - help - Say yes here to build support for Analog Devices AD5624R, AD5644R and - AD5664R converters (DAC). This driver uses the common SPI interface. - config AD5446 tristate "Analog Devices AD5446 and similar single channel DACs driver" depends on (SPI_MASTER && I2C!=m) || I2C @@ -87,6 +82,24 @@ config AD5504 To compile this driver as a module, choose M here: the module will be called ad5504. +config AD5624R_SPI + tristate "Analog Devices AD5624/44/64R DAC spi driver" + depends on SPI + help + Say yes here to build support for Analog Devices AD5624R, AD5644R and + AD5664R converters (DAC). This driver uses the common SPI interface. + +config AD5686 + tristate "Analog Devices AD5686R/AD5685R/AD5684R DAC SPI driver" + depends on SPI + help + Say yes here to build support for Analog Devices AD5686R, AD5685R, + AD5684R, AD5791 Voltage Output Digital to + Analog Converter. + + To compile this driver as a module, choose M here: the + module will be called ad5686. + config AD5755 tristate "Analog Devices AD5755/AD5755-1/AD5757/AD5735/AD5737 DAC driver" depends on SPI_MASTER @@ -119,17 +132,6 @@ config AD5791 To compile this driver as a module, choose M here: the module will be called ad5791. -config AD5686 - tristate "Analog Devices AD5686R/AD5685R/AD5684R DAC SPI driver" - depends on SPI - help - Say yes here to build support for Analog Devices AD5686R, AD5685R, - AD5684R, AD5791 Voltage Output Digital to - Analog Converter. - - To compile this driver as a module, choose M here: the - module will be called ad5686. - config AD7303 tristate "Analog Devices AD7303 DAC driver" depends on SPI diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index c8d7ab6..bb84ad6 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -2,6 +2,7 @@ # Makefile for industrial I/O DAC drivers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_AD5360) += ad5360.o obj-$(CONFIG_AD5380) += ad5380.o obj-$(CONFIG_AD5421) += ad5421.o diff --git a/drivers/iio/frequency/Kconfig b/drivers/iio/frequency/Kconfig index 6aaa33e..dc5e0b7 100644 --- a/drivers/iio/frequency/Kconfig +++ b/drivers/iio/frequency/Kconfig @@ -4,6 +4,7 @@ # Clock Distribution device drivers # Phase-Locked Loop (PLL) frequency synthesizers # +# When adding new entries keep the list in alphabetical order menu "Frequency Synthesizers DDS/PLL" diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile index 00d26e5..2bca03f 100644 --- a/drivers/iio/frequency/Makefile +++ b/drivers/iio/frequency/Makefile @@ -2,5 +2,6 @@ # Makefile iio/frequency # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_AD9523) += ad9523.o obj-$(CONFIG_ADF4350) += adf4350.o diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index 1fdcc84..5913735 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -1,6 +1,8 @@ # # IIO Digital Gyroscope Sensor drivers configuration # +# When adding new entries keep the list in alphabetical order + menu "Digital gyroscope sensors" config ADIS16080 diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile index e9dc034..36091d5 100644 --- a/drivers/iio/gyro/Makefile +++ b/drivers/iio/gyro/Makefile @@ -2,6 +2,7 @@ # Makefile for industrial I/O gyroscope sensor drivers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_ADIS16080) += adis16080.o obj-$(CONFIG_ADIS16130) += adis16130.o obj-$(CONFIG_ADIS16136) += adis16136.o diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig index 4f40a10..663e88a 100644 --- a/drivers/iio/imu/Kconfig +++ b/drivers/iio/imu/Kconfig @@ -1,6 +1,8 @@ # # IIO imu drivers configuration # +# When adding new entries keep the list in alphabetical order + menu "Inertial measurement units" config ADIS16400 diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile index f2f56ce..114d2c1 100644 --- a/drivers/iio/imu/Makefile +++ b/drivers/iio/imu/Makefile @@ -2,6 +2,7 @@ # Makefile for Inertial Measurement Units # +# When adding new entries keep the list in alphabetical order adis16400-y := adis16400_core.o adis16400-$(CONFIG_IIO_BUFFER) += adis16400_buffer.o obj-$(CONFIG_ADIS16400) += adis16400.o diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 5ef1a39..3bd29f8 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -1,6 +1,8 @@ # # Light sensors # +# When adding new entries keep the list in alphabetical order + menu "Light sensors" config ADJD_S311 @@ -15,6 +17,17 @@ config ADJD_S311 This driver can also be built as a module. If so, the module will be called adjd_s311. +config HID_SENSOR_ALS + depends on HID_SENSOR_HUB + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID ALS" + help + Say yes here to build support for the HID SENSOR + Ambient light sensor. + config SENSORS_LM3533 tristate "LM3533 ambient light sensor" depends on MFD_LM3533 @@ -52,15 +65,4 @@ config VCNL4000 To compile this driver as a module, choose M here: the module will be called vcnl4000. -config HID_SENSOR_ALS - depends on HID_SENSOR_HUB - select IIO_BUFFER - select IIO_TRIGGERED_BUFFER - select HID_SENSOR_IIO_COMMON - select HID_SENSOR_IIO_TRIGGER - tristate "HID ALS" - help - Say yes here to build support for the HID SENSOR - Ambient light sensor. - endmenu diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index 040d9c7..edef939 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -2,8 +2,9 @@ # Makefile for IIO Light sensors # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_ADJD_S311) += adjd_s311.o +obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o obj-$(CONFIG_VCNL4000) += vcnl4000.o -obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 4d55b1b..4fa923f 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -1,6 +1,8 @@ # # Magnetometer sensors # +# When adding new entries keep the list in alphabetical order + menu "Magnetometer sensors" config AK8975 diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile index 7f328e3..f91b1b6 100644 --- a/drivers/iio/magnetometer/Makefile +++ b/drivers/iio/magnetometer/Makefile @@ -2,6 +2,7 @@ # Makefile for industrial I/O Magnetometer sensor drivers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_AK8975) += ak8975.o obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 56ae890..26fdc0b 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -1,6 +1,8 @@ # # Pressure drivers # +# When adding new entries keep the list in alphabetical order + menu "Pressure sensors" config IIO_ST_PRESS diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index d4bb33e..be71464 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -2,6 +2,7 @@ # Makefile for industrial I/O pressure drivers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o st_pressure-y := st_pressure_core.o st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o diff --git a/drivers/iio/trigger/Kconfig b/drivers/iio/trigger/Kconfig index 0a4a516..7999612 100644 --- a/drivers/iio/trigger/Kconfig +++ b/drivers/iio/trigger/Kconfig @@ -1,6 +1,8 @@ # # Industrial I/O standalone triggers # +# When adding new entries keep the list in alphabetical order + menu "Triggers - standalone" config IIO_INTERRUPT_TRIGGER diff --git a/drivers/iio/trigger/Makefile b/drivers/iio/trigger/Makefile index ce319a5..0694dae 100644 --- a/drivers/iio/trigger/Makefile +++ b/drivers/iio/trigger/Makefile @@ -2,5 +2,6 @@ # Makefile for triggers not associated with iio-devices # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_IIO_INTERRUPT_TRIGGER) += iio-trig-interrupt.o obj-$(CONFIG_IIO_SYSFS_TRIGGER) += iio-trig-sysfs.o -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
