No need to swap the upper and lower byte by hand if there is a helper function which already does this. Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx> --- drivers/staging/iio/adc/ad7291.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/staging/iio/adc/ad7291.c b/drivers/staging/iio/adc/ad7291.c index bf8d689..2a7e6a7 100644 --- a/drivers/staging/iio/adc/ad7291.c +++ b/drivers/staging/iio/adc/ad7291.c @@ -87,20 +87,20 @@ static int ad7291_i2c_read(struct ad7291_chip_info *chip, u8 reg, u16 *data) struct i2c_client *client = chip->client; int ret = 0; - ret = i2c_smbus_read_word_data(client, reg); + ret = i2c_smbus_read_word_swapped(client, reg); if (ret < 0) { dev_err(&client->dev, "I2C read error\n"); return ret; } - *data = swab16((u16)ret); + *data = ret; return 0; } static int ad7291_i2c_write(struct ad7291_chip_info *chip, u8 reg, u16 data) { - return i2c_smbus_write_word_data(chip->client, reg, swab16(data)); + return i2c_smbus_write_word_swapped(chip->client, reg, data); } static irqreturn_t ad7291_event_handler(int irq, void *private) @@ -418,35 +418,33 @@ static int ad7291_read_raw(struct iio_dev *indio_dev, return ret; } /* Read voltage */ - ret = i2c_smbus_read_word_data(chip->client, + ret = i2c_smbus_read_word_swapped(chip->client, AD7291_VOLTAGE); if (ret < 0) { mutex_unlock(&chip->state_lock); return ret; } - *val = swab16((u16)ret) & AD7291_VALUE_MASK; + *val = ret & AD7291_VALUE_MASK; mutex_unlock(&chip->state_lock); return IIO_VAL_INT; case IIO_TEMP: /* Assumes tsense bit of command register always set */ - ret = i2c_smbus_read_word_data(chip->client, + ret = i2c_smbus_read_word_swapped(chip->client, AD7291_T_SENSE); if (ret < 0) return ret; - signval = (s16)((swab16((u16)ret) & - AD7291_VALUE_MASK) << 4) >> 4; + signval = (s16)((ret & AD7291_VALUE_MASK) << 4) >> 4; *val = signval; return IIO_VAL_INT; default: return -EINVAL; } case IIO_CHAN_INFO_AVERAGE_RAW: - ret = i2c_smbus_read_word_data(chip->client, + ret = i2c_smbus_read_word_swapped(chip->client, AD7291_T_AVERAGE); if (ret < 0) return ret; - signval = (s16)((swab16((u16)ret) & - AD7291_VALUE_MASK) << 4) >> 4; + signval = (s16)((ret & AD7291_VALUE_MASK) << 4) >> 4; *val = signval; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html