On 06/05/2013 05:24 PM, Sebastian Andrzej Siewior wrote:
> The TSC part allows to specify the input lines. The IIO part assumes
> that it usues always the last few, that means if IIO has adc-channels
> set to 2 it will use channel 6 and 7. However it might make sense to use
> only 6.
> This patch changes the device property (which was introduced recently
> and was never in an official release) in a way that the user can specify
> which of the AIN lines should be used. In Addition to this, the name is
> now AINx where x is the channel number i.e. for AIN6 we would have 6.
> Prior this, it always started counting at 0 which is confusing. In
> addition to this, it also checks for correct step number during reading
> and does not rely on proper FIFO depth.
>
Looks like a typo below... Also the change that is in doesn't directly seem
to be described in this description.
> Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/am335x-evm.dts | 2 +-
> drivers/iio/adc/ti_am335x_adc.c | 59 +++++++++++++++++++++++++-------------
> drivers/mfd/ti_am335x_tscadc.c | 20 +++++++++++--
> 3 files changed, 58 insertions(+), 23 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index 26fea97..0fa4c7f 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -255,6 +255,6 @@
> };
>
> adc {
> - ti,adc-channels = <4>;
> + ti,adc-channels = <4 5 6 7>;
> };
> };
> diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
> index 031f8e5..4bf34f2 100644
> --- a/drivers/iio/adc/ti_am335x_adc.c
> +++ b/drivers/iio/adc/ti_am335x_adc.c
> @@ -32,6 +32,8 @@
> struct tiadc_device {
> struct ti_tscadc_dev *mfd_tscadc;
> int channels;
> + u8 channel_line[8];
> + u8 channel_step[8];
> struct iio_map *map;
> };
>
> @@ -58,7 +60,7 @@ static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
> static void tiadc_step_config(struct tiadc_device *adc_dev)
> {
> unsigned int stepconfig;
> - int i, channels = 0, steps;
> + int i, steps;
> u32 step_en;
>
> /*
> @@ -72,16 +74,18 @@ static void tiadc_step_config(struct tiadc_device *adc_dev)
> */
>
> steps = TOTAL_STEPS - adc_dev->channels;
> - channels = TOTAL_CHANNELS - adc_dev->channels;
> -
> stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
>
> - for (i = steps; i < TOTAL_STEPS; i++) {
> - tiadc_writel(adc_dev, REG_STEPCONFIG(i),
> - stepconfig | STEPCONFIG_INP(channels));
> - tiadc_writel(adc_dev, REG_STEPDELAY(i),
> + for (i = 0; i < adc_dev->channels; i++) {
> + int chan;
> +
> + chan = adc_dev->channel_line[i];
> + tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
> + stepconfig | STEPCONFIG_INP(chan));
> + tiadc_writel(adc_dev, REG_STEPDELAY(steps),
> STEPCONFIG_OPENDLY);
> - channels++;
> + adc_dev->channel_step[i] = steps;
> + steps++;
> }
> step_en = get_adc_step_mask(adc_dev);
> am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en);
> @@ -116,9 +120,9 @@ static int tiadc_channel_init(struct iio_dev *indio_dev, int channels)
>
> chan->type = IIO_VOLTAGE;
> chan->indexed = 1;
> - chan->channel = i;
> + chan->channel = adc_dev->channel_line[i];
> chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
> - chan->datasheet_name = chan_name_ain[i];
> + chan->datasheet_name = chan_name_ain[chan->channel];
> chan->scan_type.sign = 'u';
> chan->scan_type.realbits = 12;
> chan->scan_type.storagebits = 32;
> @@ -165,7 +169,8 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
> {
> struct tiadc_device *adc_dev = iio_priv(indio_dev);
> int i;
> - unsigned int fifo1count, readx1;
> + unsigned int fifo1count, read;
> + u32 step = UINT_MAX;
>
> /*
> * When the sub-system is first enabled,
> @@ -178,11 +183,20 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
> * Hence we need to flush out this data.
> */
>
> + for (i = 0; i < ARRAY_SIZE(adc_dev->channel_step); i++) {
> + if (chan->channel == adc_dev->channel_line[i]) {
> + step = adc_dev->channel_step[i];
> + break;
> + }
> + }
> + if (WARN_ON_ONCE(step == UINT_MAX))
> + return -EINVAL;
> +
> fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
> for (i = 0; i < fifo1count; i++) {
> - readx1 = tiadc_readl(adc_dev, REG_FIFO1);
> - if (i == chan->channel)
> - *val = readx1 & 0xfff;
> + read = tiadc_readl(adc_dev, REG_FIFO1);
> + if (read >> 16 == step)
> + *val = read & 0xfff;
> }
> am335x_tsc_se_update(adc_dev->mfd_tscadc);
>
> @@ -199,8 +213,11 @@ static int tiadc_probe(struct platform_device *pdev)
> struct tiadc_device *adc_dev;
> struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);
> struct device_node *node = tscadc_dev->dev->of_node;
> + struct property *prop;
> + const __be32 *cur;
> int err;
> - u32 val32;
> + u32 val;
> + int channels = 0;
>
> if (!node) {
> dev_err(&pdev->dev, "Could not find valid DT data.\n");
> @@ -222,11 +239,13 @@ static int tiadc_probe(struct platform_device *pdev)
> err = -EINVAL;
> goto err_free_device;
> }
> - err = of_property_read_u32(node,
> - "ti,adc-channels", &val32);
> - if (err < 0)
> - goto err_free_device;
> - adc_dev->channels = val32;
> +
> + of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
> +
> + adc_dev->channel_line[channels] = val;
> + channels++;
> + }
> + adc_dev->channels = channels;
>
> indio_dev->dev.parent = &pdev->dev;
> indio_dev->name = dev_name(&pdev->dev);
> diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
> index 8bdab8d..acdb7b9 100644
> --- a/drivers/mfd/ti_am335x_tscadc.c
> +++ b/drivers/mfd/ti_am335x_tscadc.c
> @@ -80,9 +80,13 @@ static int ti_tscadc_probe(struct platform_device *pdev)
> struct clk *clk;
> struct device_node *node = pdev->dev.of_node;
> struct mfd_cell *cell;
> + struct property *prop;
> + const __be32 *cur;
> + u32 val;
> int err, ctrl;
> int clk_value, clock_rate;
> int tsc_wires = 0, adc_channels = 0, total_channels;
> + int readouts = 0;
>
> if (!pdev->dev.of_node) {
> dev_err(&pdev->dev, "Could not find valid DT data.\n");
> @@ -91,10 +95,17 @@ static int ti_tscadc_probe(struct platform_device *pdev)
>
> node = of_get_child_by_name(pdev->dev.of_node, "tsc");
> of_property_read_u32(node, "ti,wires", &tsc_wires);
> + of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
Coordiante? I'm guessing coordinate
>
> node = of_get_child_by_name(pdev->dev.of_node, "adc");
> - of_property_read_u32(node, "ti,adc-channels", &adc_channels);
> -
> + of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
> + adc_channels++;
> + if (val > 7) {
> + dev_err(&pdev->dev, " PIN numbers are 0..7 (not %d)\n",
> + val);
> + return -EINVAL;
> + }
> + }
> total_channels = tsc_wires + adc_channels;
> if (total_channels > 8) {
> dev_err(&pdev->dev, "Number of i/p channels more than 8\n");
> @@ -105,6 +116,11 @@ static int ti_tscadc_probe(struct platform_device *pdev)
> return -EINVAL;
> }
>
> + if (readouts * 2 + 2 + adc_channels > 16) {
> + dev_err(&pdev->dev, "Too many step configurations requested\n");
> + return -EINVAL;
> + }
> +
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (!res) {
> dev_err(&pdev->dev, "no memory resource defined.\n");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
