This patch add support to redirect the DRDY interrupt on INT1 or INT2
on accelerometer and pressure sensors.
Signed-off-by: Denis Ciocca <denis.ciocca@xxxxxx>
---
drivers/iio/accel/st_accel.h | 11 +++++-
drivers/iio/accel/st_accel_core.c | 27 +++++++++-----
drivers/iio/accel/st_accel_i2c.c | 2 +-
drivers/iio/accel/st_accel_spi.c | 2 +-
drivers/iio/common/st_sensors/st_sensors_core.c | 43 +++++++++++++++++++----
drivers/iio/gyro/st_gyro.h | 11 +++++-
drivers/iio/gyro/st_gyro_core.c | 13 +++----
drivers/iio/gyro/st_gyro_i2c.c | 3 +-
drivers/iio/gyro/st_gyro_spi.c | 3 +-
drivers/iio/magnetometer/st_magn.h | 3 +-
drivers/iio/magnetometer/st_magn_core.c | 5 +--
drivers/iio/magnetometer/st_magn_i2c.c | 2 +-
drivers/iio/magnetometer/st_magn_spi.c | 2 +-
drivers/iio/pressure/st_pressure.h | 14 ++++++--
drivers/iio/pressure/st_pressure_core.c | 15 +++++---
drivers/iio/pressure/st_pressure_i2c.c | 2 +-
drivers/iio/pressure/st_pressure_spi.c | 2 +-
include/linux/iio/common/st_sensors.h | 11 ++++--
include/linux/platform_data/st_sensors_pdata.h | 24 +++++++++++++
19 files changed, 153 insertions(+), 42 deletions(-)
create mode 100644 include/linux/platform_data/st_sensors_pdata.h
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index 37949b9..80253fb 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -25,7 +25,16 @@
#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
-int st_accel_common_probe(struct iio_dev *indio_dev);
+/**
+ * struct st_sensors_platform_data - default accel platform data
+ * @drdy_int_pin: default DRDY on accel is available on INT1 pin.
+ */
+static const struct st_sensors_platform_data default_accel_pdata = {
+ .drdy_int_pin = 1,
+};
+
+int st_accel_common_probe(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *pdata);
void st_accel_common_remove(struct iio_dev *indio_dev);
#ifdef CONFIG_IIO_BUFFER
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 2b8a7bd..bb8a217 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -63,7 +63,8 @@
#define ST_ACCEL_1_BDU_ADDR 0x23
#define ST_ACCEL_1_BDU_MASK 0x80
#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
-#define ST_ACCEL_1_DRDY_IRQ_MASK 0x10
+#define ST_ACCEL_1_DRDY_IRQ_INT1_MASK 0x10
+#define ST_ACCEL_1_DRDY_IRQ_INT2_MASK 0x08
#define ST_ACCEL_1_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 2 */
@@ -87,7 +88,8 @@
#define ST_ACCEL_2_BDU_ADDR 0x23
#define ST_ACCEL_2_BDU_MASK 0x80
#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
-#define ST_ACCEL_2_DRDY_IRQ_MASK 0x02
+#define ST_ACCEL_2_DRDY_IRQ_INT1_MASK 0x02
+#define ST_ACCEL_2_DRDY_IRQ_INT2_MASK 0x10
#define ST_ACCEL_2_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 3 */
@@ -119,7 +121,8 @@
#define ST_ACCEL_3_BDU_ADDR 0x20
#define ST_ACCEL_3_BDU_MASK 0x08
#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
-#define ST_ACCEL_3_DRDY_IRQ_MASK 0x80
+#define ST_ACCEL_3_DRDY_IRQ_INT1_MASK 0x80
+#define ST_ACCEL_3_DRDY_IRQ_INT2_MASK 0x00
#define ST_ACCEL_3_IG1_EN_ADDR 0x23
#define ST_ACCEL_3_IG1_EN_MASK 0x08
#define ST_ACCEL_3_MULTIREAD_BIT false
@@ -222,7 +225,8 @@ static const struct st_sensors st_accel_sensors[] = {
},
.drdy_irq = {
.addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
- .mask = ST_ACCEL_1_DRDY_IRQ_MASK,
+ .mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
+ .mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
},
.multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
.bootime = 2,
@@ -283,7 +287,8 @@ static const struct st_sensors st_accel_sensors[] = {
},
.drdy_irq = {
.addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
- .mask = ST_ACCEL_2_DRDY_IRQ_MASK,
+ .mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK,
+ .mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK,
},
.multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
.bootime = 2,
@@ -356,7 +361,8 @@ static const struct st_sensors st_accel_sensors[] = {
},
.drdy_irq = {
.addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
- .mask = ST_ACCEL_3_DRDY_IRQ_MASK,
+ .mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK,
+ .mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK,
.ig1 = {
.en_addr = ST_ACCEL_3_IG1_EN_ADDR,
.en_mask = ST_ACCEL_3_IG1_EN_MASK,
@@ -441,7 +447,8 @@ static const struct iio_trigger_ops st_accel_trigger_ops = {
#define ST_ACCEL_TRIGGER_OPS NULL
#endif
-int st_accel_common_probe(struct iio_dev *indio_dev)
+int st_accel_common_probe(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *plat_data)
{
int err;
struct st_sensor_data *adata = iio_priv(indio_dev);
@@ -463,7 +470,11 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
&adata->sensor->fs.fs_avl[0];
adata->odr = adata->sensor->odr.odr_avl[0].hz;
- err = st_sensors_init_sensor(indio_dev);
+ if (!plat_data)
+ plat_data =
+ (struct st_sensors_platform_data *)&default_accel_pdata;
+
+ err = st_sensors_init_sensor(indio_dev, plat_data);
if (err < 0)
goto st_accel_common_probe_error;
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index ffc9d09..58d164d 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -36,7 +36,7 @@ static int st_accel_i2c_probe(struct i2c_client *client,
st_sensors_i2c_configure(indio_dev, client, adata);
- err = st_accel_common_probe(indio_dev);
+ err = st_accel_common_probe(indio_dev, client->dev.platform_data);
if (err < 0)
goto st_accel_common_probe_error;
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index 22b35bf..21ed929 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -35,7 +35,7 @@ static int st_accel_spi_probe(struct spi_device *spi)
st_sensors_spi_configure(indio_dev, spi, adata);
- err = st_accel_common_probe(indio_dev);
+ err = st_accel_common_probe(indio_dev, spi->dev.platform_data);
if (err < 0)
goto st_accel_common_probe_error;
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index bd33473..5c14819a 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -17,7 +17,6 @@
#include <linux/iio/common/st_sensors.h>
-
#define ST_SENSORS_WAI_ADDRESS 0x0f
static int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
@@ -112,7 +111,8 @@ st_sensors_match_odr_error:
return ret;
}
-static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
+static int st_sensors_set_fullscale(struct iio_dev *indio_dev,
+ unsigned int fs)
{
int err, i = 0;
struct st_sensor_data *sdata = iio_priv(indio_dev);
@@ -192,13 +192,39 @@ int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable)
}
EXPORT_SYMBOL(st_sensors_set_axis_enable);
-int st_sensors_init_sensor(struct iio_dev *indio_dev)
+int st_sensors_init_sensor(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *pdata)
{
int err;
struct st_sensor_data *sdata = iio_priv(indio_dev);
mutex_init(&sdata->tb.buf_lock);
+ switch (pdata->drdy_int_pin) {
+ case 1:
+ if (sdata->sensor->drdy_irq.mask_int1 == 0) {
+ dev_err(&indio_dev->dev,
+ "DRDY on INT1 not available.\n");
+ err = -EINVAL;
+ goto init_error;
+ }
+ sdata->drdy_int_pin = 1;
+ break;
+ case 2:
+ if (sdata->sensor->drdy_irq.mask_int2 == 0) {
+ dev_err(&indio_dev->dev,
+ "DRDY on INT2 not available.\n");
+ err = -EINVAL;
+ goto init_error;
+ }
+ sdata->drdy_int_pin = 2;
+ break;
+ default:
+ dev_err(&indio_dev->dev, "DRDY on pdata not valid.\n");
+ err = -EINVAL;
+ goto init_error;
+ }
+
err = st_sensors_set_enable(indio_dev, false);
if (err < 0)
goto init_error;
@@ -227,7 +253,8 @@ EXPORT_SYMBOL(st_sensors_init_sensor);
int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
{
- int err;
+ int err = 0;
+ u8 drdy_mask;
struct st_sensor_data *sdata = iio_priv(indio_dev);
/* Enable/Disable the interrupt generator 1. */
@@ -239,10 +266,14 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
goto st_accel_set_dataready_irq_error;
}
+ if (sdata->drdy_int_pin == 1)
+ drdy_mask = sdata->sensor->drdy_irq.mask_int1;
+ else
+ drdy_mask = sdata->sensor->drdy_irq.mask_int2;
+
/* Enable/Disable the interrupt generator for data ready. */
err = st_sensors_write_data_with_mask(indio_dev,
- sdata->sensor->drdy_irq.addr,
- sdata->sensor->drdy_irq.mask, (int)enable);
+ sdata->sensor->drdy_irq.addr, drdy_mask, (int)enable);
st_accel_set_dataready_irq_error:
return err;
diff --git a/drivers/iio/gyro/st_gyro.h b/drivers/iio/gyro/st_gyro.h
index 3ad9907..a76c1cb 100644
--- a/drivers/iio/gyro/st_gyro.h
+++ b/drivers/iio/gyro/st_gyro.h
@@ -23,7 +23,16 @@
#define L3G4IS_GYRO_DEV_NAME "l3g4is_ui"
#define LSM330_GYRO_DEV_NAME "lsm330_gyro"
-int st_gyro_common_probe(struct iio_dev *indio_dev);
+/**
+ * struct st_sensors_platform_data - gyro platform data
+ * @drdy_int_pin: DRDY on gyros is available only on INT2 pin.
+ */
+static const struct st_sensors_platform_data gyro_pdata = {
+ .drdy_int_pin = 2,
+};
+
+int st_gyro_common_probe(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *pdata);
void st_gyro_common_remove(struct iio_dev *indio_dev);
#ifdef CONFIG_IIO_BUFFER
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 56e9253..9c16fb0 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -58,7 +58,7 @@
#define ST_GYRO_1_BDU_ADDR 0x23
#define ST_GYRO_1_BDU_MASK 0x80
#define ST_GYRO_1_DRDY_IRQ_ADDR 0x22
-#define ST_GYRO_1_DRDY_IRQ_MASK 0x08
+#define ST_GYRO_1_DRDY_IRQ_INT2_MASK 0x08
#define ST_GYRO_1_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 2 */
@@ -82,7 +82,7 @@
#define ST_GYRO_2_BDU_ADDR 0x23
#define ST_GYRO_2_BDU_MASK 0x80
#define ST_GYRO_2_DRDY_IRQ_ADDR 0x22
-#define ST_GYRO_2_DRDY_IRQ_MASK 0x08
+#define ST_GYRO_2_DRDY_IRQ_INT2_MASK 0x08
#define ST_GYRO_2_MULTIREAD_BIT true
static const struct iio_chan_spec st_gyro_16bit_channels[] = {
@@ -156,7 +156,7 @@ static const struct st_sensors st_gyro_sensors[] = {
},
.drdy_irq = {
.addr = ST_GYRO_1_DRDY_IRQ_ADDR,
- .mask = ST_GYRO_1_DRDY_IRQ_MASK,
+ .mask_int2 = ST_GYRO_1_DRDY_IRQ_INT2_MASK,
},
.multi_read_bit = ST_GYRO_1_MULTIREAD_BIT,
.bootime = 2,
@@ -219,7 +219,7 @@ static const struct st_sensors st_gyro_sensors[] = {
},
.drdy_irq = {
.addr = ST_GYRO_2_DRDY_IRQ_ADDR,
- .mask = ST_GYRO_2_DRDY_IRQ_MASK,
+ .mask_int2 = ST_GYRO_2_DRDY_IRQ_INT2_MASK,
},
.multi_read_bit = ST_GYRO_2_MULTIREAD_BIT,
.bootime = 2,
@@ -300,7 +300,8 @@ static const struct iio_trigger_ops st_gyro_trigger_ops = {
#define ST_GYRO_TRIGGER_OPS NULL
#endif
-int st_gyro_common_probe(struct iio_dev *indio_dev)
+int st_gyro_common_probe(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *pdata)
{
int err;
struct st_sensor_data *gdata = iio_priv(indio_dev);
@@ -322,7 +323,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
&gdata->sensor->fs.fs_avl[0];
gdata->odr = gdata->sensor->odr.odr_avl[0].hz;
- err = st_sensors_init_sensor(indio_dev);
+ err = st_sensors_init_sensor(indio_dev, pdata);
if (err < 0)
goto st_gyro_common_probe_error;
diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
index 8a31050..2345833 100644
--- a/drivers/iio/gyro/st_gyro_i2c.c
+++ b/drivers/iio/gyro/st_gyro_i2c.c
@@ -36,7 +36,8 @@ static int st_gyro_i2c_probe(struct i2c_client *client,
st_sensors_i2c_configure(indio_dev, client, gdata);
- err = st_gyro_common_probe(indio_dev);
+ err = st_gyro_common_probe(indio_dev,
+ (struct st_sensors_platform_data *)&gyro_pdata);
if (err < 0)
goto st_gyro_common_probe_error;
diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
index f354039..0dcceb5 100644
--- a/drivers/iio/gyro/st_gyro_spi.c
+++ b/drivers/iio/gyro/st_gyro_spi.c
@@ -35,7 +35,8 @@ static int st_gyro_spi_probe(struct spi_device *spi)
st_sensors_spi_configure(indio_dev, spi, gdata);
- err = st_gyro_common_probe(indio_dev);
+ err = st_gyro_common_probe(indio_dev,
+ (struct st_sensors_platform_data *)&gyro_pdata);
if (err < 0)
goto st_gyro_common_probe_error;
diff --git a/drivers/iio/magnetometer/st_magn.h b/drivers/iio/magnetometer/st_magn.h
index 7e81d00..b4940c7 100644
--- a/drivers/iio/magnetometer/st_magn.h
+++ b/drivers/iio/magnetometer/st_magn.h
@@ -18,7 +18,8 @@
#define LSM303DLM_MAGN_DEV_NAME "lsm303dlm_magn"
#define LIS3MDL_MAGN_DEV_NAME "lis3mdl"
-int st_magn_common_probe(struct iio_dev *indio_dev);
+int st_magn_common_probe(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *pdata);
void st_magn_common_remove(struct iio_dev *indio_dev);
#ifdef CONFIG_IIO_BUFFER
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 3208ba8..a6ff23d 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -343,7 +343,8 @@ static const struct iio_info magn_info = {
.write_raw = &st_magn_write_raw,
};
-int st_magn_common_probe(struct iio_dev *indio_dev)
+int st_magn_common_probe(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *pdata)
{
int err;
struct st_sensor_data *mdata = iio_priv(indio_dev);
@@ -365,7 +366,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
&mdata->sensor->fs.fs_avl[0];
mdata->odr = mdata->sensor->odr.odr_avl[0].hz;
- err = st_sensors_init_sensor(indio_dev);
+ err = st_sensors_init_sensor(indio_dev, pdata);
if (err < 0)
goto st_magn_common_probe_error;
diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c
index e6adc4a..1bed117 100644
--- a/drivers/iio/magnetometer/st_magn_i2c.c
+++ b/drivers/iio/magnetometer/st_magn_i2c.c
@@ -36,7 +36,7 @@ static int st_magn_i2c_probe(struct i2c_client *client,
st_sensors_i2c_configure(indio_dev, client, mdata);
- err = st_magn_common_probe(indio_dev);
+ err = st_magn_common_probe(indio_dev, NULL);
if (err < 0)
goto st_magn_common_probe_error;
diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
index 51adb79..a2333a1 100644
--- a/drivers/iio/magnetometer/st_magn_spi.c
+++ b/drivers/iio/magnetometer/st_magn_spi.c
@@ -35,7 +35,7 @@ static int st_magn_spi_probe(struct spi_device *spi)
st_sensors_spi_configure(indio_dev, spi, mdata);
- err = st_magn_common_probe(indio_dev);
+ err = st_magn_common_probe(indio_dev, NULL);
if (err < 0)
goto st_magn_common_probe_error;
diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h
index d817387..84dd663 100644
--- a/drivers/iio/pressure/st_pressure.h
+++ b/drivers/iio/pressure/st_pressure.h
@@ -19,7 +19,16 @@
#define ST_PRESS_BYTE_FOR_CHANNEL 3
#define ST_TEMP_BYTE_FOR_CHANNEL 2
-int st_press_common_probe(struct iio_dev *indio_dev);
+/**
+ * struct st_sensors_platform_data - default press platform data
+ * @drdy_int_pin: default DRDY on press is available on INT1 pin.
+ */
+static const struct st_sensors_platform_data default_press_pdata = {
+ .drdy_int_pin = 1,
+};
+
+int st_press_common_probe(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *pdata);
void st_press_common_remove(struct iio_dev *indio_dev);
#ifdef CONFIG_IIO_BUFFER
@@ -36,8 +45,7 @@ static inline int st_press_allocate_ring(struct iio_dev *indio_dev)
static inline void st_press_deallocate_ring(struct iio_dev *indio_dev)
{
}
-static int st_press_get_buffer_element(struct iio_dev *indio_dev,
- u8 *buf)
+static int st_press_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
{
return 0;
}
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index ae5703f..08b1d13 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -56,7 +56,8 @@
#define ST_PRESS_1_BDU_ADDR 0x20
#define ST_PRESS_1_BDU_MASK 0x04
#define ST_PRESS_1_DRDY_IRQ_ADDR 0x22
-#define ST_PRESS_1_DRDY_IRQ_MASK 0x04
+#define ST_PRESS_1_DRDY_IRQ_INT1_MASK 0x04
+#define ST_PRESS_1_DRDY_IRQ_INT2_MASK 0x20
#define ST_PRESS_1_MULTIREAD_BIT true
#define ST_PRESS_1_TEMP_OFFSET 42500
@@ -114,7 +115,8 @@ static const struct st_sensors st_press_sensors[] = {
},
.drdy_irq = {
.addr = ST_PRESS_1_DRDY_IRQ_ADDR,
- .mask = ST_PRESS_1_DRDY_IRQ_MASK,
+ .mask_int1 = ST_PRESS_1_DRDY_IRQ_INT1_MASK,
+ .mask_int2 = ST_PRESS_1_DRDY_IRQ_INT2_MASK,
},
.multi_read_bit = ST_PRESS_1_MULTIREAD_BIT,
.bootime = 2,
@@ -277,7 +279,8 @@ static const struct iio_trigger_ops st_press_trigger_ops = {
#define ST_PRESS_TRIGGER_OPS NULL
#endif
-int st_press_common_probe(struct iio_dev *indio_dev)
+int st_press_common_probe(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *plat_data)
{
int err;
struct st_sensor_data *pdata = iio_priv(indio_dev);
@@ -299,7 +302,11 @@ int st_press_common_probe(struct iio_dev *indio_dev)
&pdata->sensor->fs.fs_avl[0];
pdata->odr = pdata->sensor->odr.odr_avl[0].hz;
- err = st_sensors_init_sensor(indio_dev);
+ if (!plat_data)
+ plat_data =
+ (struct st_sensors_platform_data *)&default_press_pdata;
+
+ err = st_sensors_init_sensor(indio_dev, plat_data);
if (err < 0)
goto st_press_common_probe_error;
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index 7cebcc7..3065993 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -36,7 +36,7 @@ static int st_press_i2c_probe(struct i2c_client *client,
st_sensors_i2c_configure(indio_dev, client, pdata);
- err = st_press_common_probe(indio_dev);
+ err = st_press_common_probe(indio_dev, client->dev.platform_data);
if (err < 0)
goto st_press_common_probe_error;
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index 17a1490..b2aded6 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -35,7 +35,7 @@ static int st_press_spi_probe(struct spi_device *spi)
st_sensors_spi_configure(indio_dev, spi, pdata);
- err = st_press_common_probe(indio_dev);
+ err = st_press_common_probe(indio_dev, spi->dev.platform_data);
if (err < 0)
goto st_press_common_probe_error;
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index fd81707..9e8c1e4 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -17,6 +17,8 @@
#include <linux/iio/trigger.h>
#include <linux/bitops.h>
+#include <linux/platform_data/st_sensors_pdata.h>
+
#define ST_SENSORS_TX_MAX_LENGTH 2
#define ST_SENSORS_RX_MAX_LENGTH 6
@@ -127,7 +129,8 @@ struct st_sensor_bdu {
*/
struct st_sensor_data_ready_irq {
u8 addr;
- u8 mask;
+ u8 mask_int1;
+ u8 mask_int2;
struct {
u8 en_addr;
u8 en_mask;
@@ -202,6 +205,7 @@ struct st_sensors {
* @multiread_bit: Use or not particular bit for [I2C/SPI] multiread.
* @buffer_data: Data used by buffer part.
* @odr: Output data rate of the sensor [Hz].
+ * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
* @get_irq_data_ready: Function to get the IRQ used for data ready signal.
* @get_buffer_element: Function to get data from sensor and push on buffer.
* @tf: Transfer function structure used by I/O operations.
@@ -220,6 +224,8 @@ struct st_sensor_data {
unsigned int odr;
+ u8 drdy_int_pin;
+
unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev);
int (*get_buffer_element) (struct iio_dev *indio_dev, u8 *buf);
@@ -251,7 +257,8 @@ static inline void st_sensors_deallocate_trigger(struct iio_dev *indio_dev)
}
#endif
-int st_sensors_init_sensor(struct iio_dev *indio_dev);
+int st_sensors_init_sensor(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *pdata);
int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable);
diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h
new file mode 100644
index 0000000..1f6a4ce
--- /dev/null
+++ b/include/linux/platform_data/st_sensors_pdata.h
@@ -0,0 +1,24 @@
+/*
+ * STMicroelectronics sensors platform-data driver
+ *
+ * Copyright 2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@xxxxxx>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_SENSORS_PDATA_H
+#define ST_SENSORS_PDATA_H
+
+/**
+ * struct st_sensors_platform_data - Platform data for the ST sensors
+ * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
+ * Available only for accelerometer and pressure sensors.
+ * Accelerometer DRDY on LSM330 availbale only on pin 1 (see datasheet).
+ */
+struct st_sensors_platform_data {
+ u8 drdy_int_pin;
+};
+
+#endif /* ST_SENSORS_PDATA_H */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
