Re: [PATCH v2 2/4] iio: adc: Add dt support for turning on the phy in exynos-adc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14 March 2013 02:10, Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
> Without this change the exynos adc controller needed to have its phy
> enabled in some out-of-driver C code.  Add support for specifying the
> phy enable register by listing it in the reg list.
>
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>

Worked for me, Its needed for Exynos5250 and future versions too.
Tested on SMDK5250.
> ---
> Changes in v2: None
>
>  .../devicetree/bindings/arm/samsung/exynos-adc.txt         |  4 ++--
>  drivers/iio/adc/exynos_adc.c                               | 14 +++++++++++++-
>  2 files changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
> index 96db940..05be151 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
> @@ -15,7 +15,7 @@ Required properties:
>                         Must be "samsung,exynos-adc-v2" for
>                                 future controllers.
>  - reg:                 Contains ADC register address range (base address and
> -                       length).
> +                       length) and the address of the phy enable register.
>  - interrupts:          Contains the interrupt information for the timer. The
>                         format is being dependent on which interrupt controller
>                         the Samsung device uses.
> @@ -30,7 +30,7 @@ Example: adding device info in dtsi file
>
>  adc: adc@12D10000 {
>         compatible = "samsung,exynos-adc-v1";
> -       reg = <0x12D10000 0x100>;
> +       reg = <0x12D10000 0x100>, <0x10040718 0x4>;
>         interrupts = <0 106 0>;
>         #io-channel-cells = <1>;
>         io-channel-ranges;
> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
> index ed6fdd7..5ab0dfd 100644
> --- a/drivers/iio/adc/exynos_adc.c
> +++ b/drivers/iio/adc/exynos_adc.c
> @@ -85,6 +85,7 @@ enum adc_version {
>
>  struct exynos_adc {
>         void __iomem            *regs;
> +       void __iomem            *enable_reg;
>         struct clk              *clk;
>         unsigned int            irq;
>         struct regulator        *vdd;
> @@ -269,13 +270,19 @@ static int exynos_adc_probe(struct platform_device *pdev)
>         info = iio_priv(indio_dev);
>
>         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -
>         info->regs = devm_request_and_ioremap(&pdev->dev, mem);
>         if (!info->regs) {
>                 ret = -ENOMEM;
>                 goto err_iio;
>         }
>
> +       mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +       info->enable_reg = devm_request_and_ioremap(&pdev->dev, mem);
> +       if (!info->enable_reg) {
> +               ret = -ENOMEM;
> +               goto err_iio;
> +       }
> +
>         irq = platform_get_irq(pdev, 0);
>         if (irq < 0) {
>                 dev_err(&pdev->dev, "no irq resource?\n");
> @@ -295,6 +302,8 @@ static int exynos_adc_probe(struct platform_device *pdev)
>                 goto err_iio;
>         }
>
> +       writel(1, info->enable_reg);
> +
>         info->clk = devm_clk_get(&pdev->dev, "adc");
>         if (IS_ERR(info->clk)) {
>                 dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
> @@ -370,6 +379,7 @@ static int exynos_adc_remove(struct platform_device *pdev)
>                                 exynos_adc_remove_devices);
>         regulator_disable(info->vdd);
>         clk_disable_unprepare(info->clk);
> +       writel(0, info->enable_reg);
>         iio_device_unregister(indio_dev);
>         free_irq(info->irq, info);
>         iio_device_free(indio_dev);
> @@ -395,6 +405,7 @@ static int exynos_adc_suspend(struct device *dev)
>         }
>
>         clk_disable_unprepare(info->clk);
> +       writel(0, info->enable_reg);
>         regulator_disable(info->vdd);
>
>         return 0;
> @@ -410,6 +421,7 @@ static int exynos_adc_resume(struct device *dev)
>         if (ret)
>                 return ret;
>
> +       writel(1, info->enable_reg);
>         clk_prepare_enable(info->clk);
>
>         exynos_adc_hw_init(info);
> --
> 1.8.1.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/



-- 
Shine bright,
(: Nav :)
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux