Re: [PATCH v5] iio: Add OF support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/20/2013 01:24 PM, Guenter Roeck wrote:
> On Wed, Feb 20, 2013 at 06:51:08PM +0000, Jonathan Cameron wrote:
>>
>>
>> Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>>
>>> On Wed, Feb 20, 2013 at 11:38:22AM -0600, Rob Herring wrote:
>>>> On 02/07/2013 11:09 AM, Guenter Roeck wrote:
>>>>> Provide bindings and parse OF data during initialization.
>>>>>
>>>>> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
>>>>> ---
>>>>> v5:
>>>>> - Updated examples in bindings.
>>>>> v4:
>>>>> - Fixed wrong parameter to dummy of_iio_channel_get_by_name if
>>> CONFIG_OF is
>>>>>   undefined, and wrong return value.
>>>>> - Initialize indio_dev->of_node in iio_device_register if the
>>> calling driver
>>>>>   neglected to do it.
>>>>> v3:
>>>>> - Cleaned up documentation (formatting, left-over clock references)
>>>>> - Updated bindings description to permit sub-devices
>>>>> - When searching for iio devices, use the pointer to the iio device
>>> type instead
>>>>>   of strcmp. Rename iio_dev_type to iio_device_type (to match other
>>> device
>>>>>   types) and make it global for that purpose. Check the OF node
>>> first, then the
>>>>>   device type, as the node is less likely to match.
>>>>> - Move the common code in of_iio_channel_get and
>>> of_iio_channel_get_all to
>>>>>   __of_iio_channel_get.
>>>>> - Return NULL from of_iio_channel_get_by_name if nothing is found,
>>> or
>>>>>   an error if there is a problem with consistency or if the
>>> provider device is
>>>>>   not yet available.
>>>>> - In iio_channel_get, return if of_iio_channel_get_by_name()
>>> returns a channel
>>>>>   or an error, and continue otherwise.
>>>>> v2:
>>>>> - Rebased to iio/togreg
>>>>> - Documentation update per feedback
>>>>> - Dropped io-channel-output-names from the bindings document. The
>>> property is
>>>>>   not used in the code, and it is not entirely clear what it would
>>> be used for.
>>>>>   If there is a need for it, we can add it back in later on.
>>>>> - Don't export OF specific API calls
>>>>> - For OF support, no longer depend on iio_map
>>>>> - Add #ifdef CONFIG_OF where appropriate, and ensure that the code
>>> still builds
>>>>>   if it is not selected.
>>>>> - Change iio_channel_get to take device pointer as argument instead
>>> of device
>>>>>   name. Retain old API as of_iio_channel_get_sys.
>>>>> - iio_channel_get now works for both OF and non-OF configurations
>>>>> - Use regulator to get vref for max1363 driver.
>>>>>
>>>>>  .../devicetree/bindings/iio/iio-bindings.txt       |   97
>>> +++++++++++
>>>>>  drivers/iio/iio_core.h                             |    1 +
>>>>>  drivers/iio/industrialio-core.c                    |    8 +-
>>>>>  drivers/iio/inkern.c                               |  171
>>> ++++++++++++++++++++
>>>>>  4 files changed, 275 insertions(+), 2 deletions(-)
>>>>>  create mode 100644
>>> Documentation/devicetree/bindings/iio/iio-bindings.txt
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt
>>> b/Documentation/devicetree/bindings/iio/iio-bindings.txt
>>>>> new file mode 100644
>>>>> index 0000000..1182845
>>>>> --- /dev/null
>>>>> +++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
>>>>> @@ -0,0 +1,97 @@
>>>>> +This binding is a work-in-progress. It is derived from clock
>>> bindings,
>>>>> +and based on suggestions from Lars-Peter Clausen [1].
>>>>
>>>> Bindings are an ABI. It should not be a WIP. What part is a WIP?
>>>>
>>> The text is copied from clock bindings. I do not claim to be better
>>> than the clock subsystem is doing in respect to its bindings.

That should be fixed. The clock bindings are fixed.

>>>
>>> I'll be more than happy to take this text out if it is a source of
>>> contention,
>>> even more so if that is what is holding up the patch. Jonathan ?
>> I don't really care about the wording though can see why Rob asked!
>> We will probably have other stuff to add anyway.
>>
> 
> Quite likely - for example, I did not add io-output-names since I did not
> know what to do with it.

Good because name strings are typically optional.

Adding to bindings is fine. Changing what's already there should be
avoided. New kernels need to work with old DTBs and vice-versa.

Rob

> What do you want me to do ? Submit another version with the sentence deleted,
> or keep it as-is ?
> 
> Thanks,
> Guenter
> 
>> Jonathan
>>>
>>> Thanks,
>>> Guenter
>>>
>>>> Knowing nothing about IIO, the binding seems sane.
>>>>
>>>> Rob
>>>>
>>>>> +Sources of IIO channels can be represented by any node in the
>>> device
>>>>> +tree. Those nodes are designated as IIO providers. IIO consumer
>>>>> +nodes use a phandle and IIO specifier pair to connect IIO provider
>>>>> +outputs to IIO inputs. Similar to the gpio specifiers, an IIO
>>>>> +specifier is an array of one or more cells identifying the IIO
>>>>> +output on a device. The length of an IIO specifier is defined by
>>> the
>>>>> +value of a #io-channel-cells property in the IIO provider node.
>>>>> +
>>>>> +[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
>>>>> +
>>>>> +==IIO providers==
>>>>> +
>>>>> +Required properties:
>>>>> +#io-channel-cells: Number of cells in an IIO specifier; Typically
>>> 0 for nodes
>>>>> +		   with a single IIO output and 1 for nodes with multiple
>>>>> +		   IIO outputs.
>>>>> +
>>>>> +Example for a simple configuration with no trigger:
>>>>> +
>>>>> +	adc: voltage-sensor@35 {
>>>>> +		compatible = "maxim,max1139";
>>>>> +		reg = <0x35>;
>>>>> +		#io-channel-cells = <1>;
>>>>> +	};
>>>>> +
>>>>> +Example for a configuration with trigger:
>>>>> +
>>>>> +	adc@35 {
>>>>> +		compatible = "some-vendor,some-adc";
>>>>> +		reg = <0x35>;
>>>>> +
>>>>> +		adc1: iio-device@0 {
>>>>> +			#io-channel-cells = <1>;
>>>>> +			/* other properties */
>>>>> +		};
>>>>> +		adc2: iio-device@1 {
>>>>> +			#io-channel-cells = <1>;
>>>>> +			/* other properties */
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +==IIO consumers==
>>>>> +
>>>>> +Required properties:
>>>>> +io-channels:	List of phandle and IIO specifier pairs, one pair
>>>>> +		for each IIO input to the device. Note: if the
>>>>> +		IIO provider specifies '0' for #io-channel-cells,
>>>>> +		then only the phandle portion of the pair will appear.
>>>>> +
>>>>> +Optional properties:
>>>>> +io-channel-names:
>>>>> +		List of IIO input name strings sorted in the same
>>>>> +		order as the io-channels property. Consumers drivers
>>>>> +		will use io-channel-names to match IIO input names
>>>>> +		with IIO specifiers.
>>>>> +io-channel-ranges:
>>>>> +		Empty property indicating that child nodes can inherit named
>>>>> +		IIO channels from this node. Useful for bus nodes to provide
>>>>> +		and IIO channel to their children.
>>>>> +
>>>>> +For example:
>>>>> +
>>>>> +	device {
>>>>> +		io-channels = <&adc 1>, <&ref 0>;
>>>>> +		io-channel-names = "vcc", "vdd";
>>>>> +	};
>>>>> +
>>>>> +This represents a device with two IIO inputs, named "vcc" and
>>> "vdd".
>>>>> +The vcc channel is connected to output 1 of the &adc device, and
>>> the
>>>>> +vdd channel is connected to output 0 of the &ref device.
>>>>> +
>>>>> +==Example==
>>>>> +
>>>>> +	adc: max1139@35 {
>>>>> +		compatible = "maxim,max1139";
>>>>> +		reg = <0x35>;
>>>>> +		#io-channel-cells = <1>;
>>>>> +	};
>>>>> +
>>>>> +	...
>>>>> +
>>>>> +	iio_hwmon {
>>>>> +		compatible = "iio-hwmon";
>>>>> +		io-channels = <&adc 0>, <&adc 1>, <&adc 2>,
>>>>> +			<&adc 3>, <&adc 4>, <&adc 5>,
>>>>> +			<&adc 6>, <&adc 7>, <&adc 8>,
>>>>> +			<&adc 9>;
>>>>> +	};
>>>>> +
>>>>> +	some_consumer {
>>>>> +		compatible = "some-consumer";
>>>>> +		io-channels = <&adc 10>, <&adc 11>;
>>>>> +		io-channel-names = "adc1", "adc2";
>>>>> +	};
>>>>> diff --git a/drivers/iio/iio_core.h b/drivers/iio/iio_core.h
>>>>> index f652e6a..05c1b74 100644
>>>>> --- a/drivers/iio/iio_core.h
>>>>> +++ b/drivers/iio/iio_core.h
>>>>> @@ -18,6 +18,7 @@
>>>>>  struct iio_chan_spec;
>>>>>  struct iio_dev;
>>>>>  
>>>>> +extern struct device_type iio_device_type;
>>>>>  
>>>>>  int __iio_add_chan_devattr(const char *postfix,
>>>>>  			   struct iio_chan_spec const *chan,
>>>>> diff --git a/drivers/iio/industrialio-core.c
>>> b/drivers/iio/industrialio-core.c
>>>>> index 8848f16..6d8b027 100644
>>>>> --- a/drivers/iio/industrialio-core.c
>>>>> +++ b/drivers/iio/industrialio-core.c
>>>>> @@ -847,7 +847,7 @@ static void iio_dev_release(struct device
>>> *device)
>>>>>  	kfree(indio_dev);
>>>>>  }
>>>>>  
>>>>> -static struct device_type iio_dev_type = {
>>>>> +struct device_type iio_device_type = {
>>>>>  	.name = "iio_device",
>>>>>  	.release = iio_dev_release,
>>>>>  };
>>>>> @@ -869,7 +869,7 @@ struct iio_dev *iio_device_alloc(int
>>> sizeof_priv)
>>>>>  
>>>>>  	if (dev) {
>>>>>  		dev->dev.groups = dev->groups;
>>>>> -		dev->dev.type = &iio_dev_type;
>>>>> +		dev->dev.type = &iio_device_type;
>>>>>  		dev->dev.bus = &iio_bus_type;
>>>>>  		device_initialize(&dev->dev);
>>>>>  		dev_set_drvdata(&dev->dev, (void *)dev);
>>>>> @@ -960,6 +960,10 @@ int iio_device_register(struct iio_dev
>>> *indio_dev)
>>>>>  {
>>>>>  	int ret;
>>>>>  
>>>>> +	/* If the calling driver did not initialize of_node, do it here
>>> */
>>>>> +	if (!indio_dev->dev.of_node && indio_dev->dev.parent)
>>>>> +		indio_dev->dev.of_node = indio_dev->dev.parent->of_node;
>>>>> +
>>>>>  	/* configure elements for the chrdev */
>>>>>  	indio_dev->dev.devt = MKDEV(MAJOR(iio_devt), indio_dev->id);
>>>>>  
>>>>> diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
>>>>> index b289915..795d100 100644
>>>>> --- a/drivers/iio/inkern.c
>>>>> +++ b/drivers/iio/inkern.c
>>>>> @@ -10,6 +10,7 @@
>>>>>  #include <linux/export.h>
>>>>>  #include <linux/slab.h>
>>>>>  #include <linux/mutex.h>
>>>>> +#include <linux/of.h>
>>>>>  
>>>>>  #include <linux/iio/iio.h>
>>>>>  #include "iio_core.h"
>>>>> @@ -92,6 +93,164 @@ static const struct iio_chan_spec
>>>>>  	return chan;
>>>>>  }
>>>>>  
>>>>> +#ifdef CONFIG_OF
>>>>> +
>>>>> +static int iio_dev_node_match(struct device *dev, void *data)
>>>>> +{
>>>>> +	return dev->of_node == data && dev->type == &iio_device_type;
>>>>> +}
>>>>> +
>>>>> +static int __of_iio_channel_get(struct iio_channel *channel,
>>>>> +				struct device_node *np, int index)
>>>>> +{
>>>>> +	struct device *idev;
>>>>> +	struct iio_dev *indio_dev;
>>>>> +	int err;
>>>>> +	struct of_phandle_args iiospec;
>>>>> +
>>>>> +	err = of_parse_phandle_with_args(np, "io-channels",
>>>>> +					 "#io-channel-cells",
>>>>> +					 index, &iiospec);
>>>>> +	if (err)
>>>>> +		return err;
>>>>> +
>>>>> +	idev = bus_find_device(&iio_bus_type, NULL, iiospec.np,
>>>>> +			       iio_dev_node_match);
>>>>> +	of_node_put(iiospec.np);
>>>>> +	if (idev == NULL)
>>>>> +		return -EPROBE_DEFER;
>>>>> +
>>>>> +	indio_dev = dev_to_iio_dev(idev);
>>>>> +	channel->indio_dev = indio_dev;
>>>>> +	index = iiospec.args_count ? iiospec.args[0] : 0;
>>>>> +	if (index >= indio_dev->num_channels) {
>>>>> +		return -EINVAL;
>>>>> +		goto err_put;
>>>>> +	}
>>>>> +	channel->channel = &indio_dev->channels[index];
>>>>> +
>>>>> +	return 0;
>>>>> +
>>>>> +err_put:
>>>>> +	iio_device_put(indio_dev);
>>>>> +	return err;
>>>>> +}
>>>>> +
>>>>> +static struct iio_channel *of_iio_channel_get(struct device_node
>>> *np, int index)
>>>>> +{
>>>>> +	struct iio_channel *channel;
>>>>> +	int err;
>>>>> +
>>>>> +	if (index < 0)
>>>>> +		return ERR_PTR(-EINVAL);
>>>>> +
>>>>> +	channel = kzalloc(sizeof(*channel), GFP_KERNEL);
>>>>> +	if (channel == NULL)
>>>>> +		return ERR_PTR(-ENOMEM);
>>>>> +
>>>>> +	err = __of_iio_channel_get(channel, np, index);
>>>>> +	if (err)
>>>>> +		goto err_free_channel;
>>>>> +
>>>>> +	return channel;
>>>>> +
>>>>> +err_free_channel:
>>>>> +	kfree(channel);
>>>>> +	return ERR_PTR(err);
>>>>> +}
>>>>> +
>>>>> +static struct iio_channel *of_iio_channel_get_by_name(struct
>>> device_node *np,
>>>>> +						      const char *name)
>>>>> +{
>>>>> +	struct iio_channel *chan = NULL;
>>>>> +
>>>>> +	/* Walk up the tree of devices looking for a matching iio channel
>>> */
>>>>> +	while (np) {
>>>>> +		int index = 0;
>>>>> +
>>>>> +		/*
>>>>> +		 * For named iio channels, first look up the name in the
>>>>> +		 * "io-channel-names" property.  If it cannot be found, the
>>>>> +		 * index will be an error code, and of_iio_channel_get()
>>>>> +		 * will fail.
>>>>> +		 */
>>>>> +		if (name)
>>>>> +			index = of_property_match_string(np, "io-channel-names",
>>>>> +							 name);
>>>>> +		chan = of_iio_channel_get(np, index);
>>>>> +		if (!IS_ERR(chan))
>>>>> +			break;
>>>>> +		else if (name && index >= 0) {
>>>>> +			pr_err("ERROR: could not get IIO channel %s:%s(%i)\n",
>>>>> +				np->full_name, name ? name : "", index);
>>>>> +			return chan;
>>>>> +		}
>>>>> +
>>>>> +		/*
>>>>> +		 * No matching IIO channel found on this node.
>>>>> +		 * If the parent node has a "io-channel-ranges" property,
>>>>> +		 * then we can try one of its channels.
>>>>> +		 */
>>>>> +		np = np->parent;
>>>>> +		if (np && !of_get_property(np, "io-channel-ranges", NULL))
>>>>> +			break;
>>>>> +	}
>>>>> +	return chan;
>>>>> +}
>>>>> +
>>>>> +static struct iio_channel *of_iio_channel_get_all(struct device
>>> *dev)
>>>>> +{
>>>>> +	struct iio_channel *chans;
>>>>> +	int i, mapind, nummaps = 0;
>>>>> +	int ret;
>>>>> +
>>>>> +	do {
>>>>> +		ret = of_parse_phandle_with_args(dev->of_node,
>>>>> +						 "io-channels",
>>>>> +						 "#io-channel-cells",
>>>>> +						 nummaps, NULL);
>>>>> +		if (ret < 0)
>>>>> +			break;
>>>>> +	} while (++nummaps);
>>>>> +
>>>>> +	if (nummaps == 0)	/* no error, return NULL to search map table */
>>>>> +		return NULL;
>>>>> +
>>>>> +	/* NULL terminated array to save passing size */
>>>>> +	chans = kcalloc(nummaps + 1, sizeof(*chans), GFP_KERNEL);
>>>>> +	if (chans == NULL)
>>>>> +		return ERR_PTR(-ENOMEM);
>>>>> +
>>>>> +	/* Search for OF matches */
>>>>> +	for (mapind = 0; mapind < nummaps; mapind++) {
>>>>> +		ret = __of_iio_channel_get(&chans[mapind], dev->of_node,
>>>>> +					   mapind);
>>>>> +		if (ret)
>>>>> +			goto error_free_chans;
>>>>> +	}
>>>>> +	return chans;
>>>>> +
>>>>> +error_free_chans:
>>>>> +	for (i = 0; i < mapind; i++)
>>>>> +		iio_device_put(chans[i].indio_dev);
>>>>> +	kfree(chans);
>>>>> +	return ERR_PTR(ret);
>>>>> +}
>>>>> +
>>>>> +#else /* CONFIG_OF */
>>>>> +
>>>>> +static inline struct iio_channel *
>>>>> +of_iio_channel_get_by_name(struct device_node *np, const char
>>> *name)
>>>>> +{
>>>>> +	return NULL;
>>>>> +}
>>>>> +
>>>>> +static inline struct iio_channel *of_iio_channel_get_all(struct
>>> device *dev)
>>>>> +{
>>>>> +	return NULL;
>>>>> +}
>>>>> +
>>>>> +#endif /* CONFIG_OF */
>>>>>  
>>>>>  static struct iio_channel *iio_channel_get_sys(const char *name,
>>>>>  					       const char *channel_name)
>>>>> @@ -150,7 +309,14 @@ struct iio_channel *iio_channel_get(struct
>>> device *dev,
>>>>>  				    const char *channel_name)
>>>>>  {
>>>>>  	const char *name = dev ? dev_name(dev) : NULL;
>>>>> +	struct iio_channel *channel;
>>>>>  
>>>>> +	if (dev) {
>>>>> +		channel = of_iio_channel_get_by_name(dev->of_node,
>>>>> +						     channel_name);
>>>>> +		if (channel != NULL)
>>>>> +			return channel;
>>>>> +	}
>>>>>  	return iio_channel_get_sys(name, channel_name);
>>>>>  }
>>>>>  EXPORT_SYMBOL_GPL(iio_channel_get);
>>>>> @@ -173,6 +339,11 @@ struct iio_channel *iio_channel_get_all(struct
>>> device *dev)
>>>>>  
>>>>>  	if (dev == NULL)
>>>>>  		return ERR_PTR(-EINVAL);
>>>>> +
>>>>> +	chans = of_iio_channel_get_all(dev);
>>>>> +	if (chans)
>>>>> +		return chans;
>>>>> +
>>>>>  	name = dev_name(dev);
>>>>>  
>>>>>  	mutex_lock(&iio_map_list_lock);
>>>>>
>>>>
>>>>
>>
>> -- 
>> Sent from my Android phone with K-9 Mail. Please excuse my brevity.
>>

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux