Re: iio: adc: add exynos5 adc driver under iio framwork

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13 February 2013 19:00, Lars-Peter Clausen <lars@xxxxxxxxxx> wrote:
> On 02/13/2013 02:16 PM, Naveen Krishna Ch wrote:
>> Please ignore the unfinished previous mail.
>>
>>
>>
>> On 13 February 2013 08:18, Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx> wrote:
>>> On 13 February 2013 02:37, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>>>> On Wed, Jan 23, 2013 at 04:58:06AM -0000, Naveen Krishna Chatradhi wrote:
>>>>> This patch add an ADC IP found on EXYNOS5 series socs from Samsung.
>>>>> Also adds the Documentation for device tree bindings.
>>>>>
>>>>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
>>>>>
>>>>> ---
>>>>> Changes since v1:
>>>>>
>>>>> 1. Fixed comments from Lars
>>>>> 2. Added support for ADC on EXYNOS5410
>>>>>
>>>>> Changes since v2:
>>>>>
>>>>> 1. Changed the instance name for (struct iio_dev *) to indio_dev
>>>>> 2. Changed devm_request_irq to request_irq
>>>>>
>>>>> Few doubts regarding the mappings and child device handling.
>>>>> Kindly, suggest me better methods.
>>>>>
>>>>>  .../bindings/arm/samsung/exynos5-adc.txt           |   37 ++
>>>>>  drivers/iio/adc/Kconfig                            |    7 +
>>>>>  drivers/iio/adc/Makefile                           |    1 +
>>>>>  drivers/iio/adc/exynos5_adc.c                      |  464 ++++++++++++++++++++
>>>>>  4 files changed, 509 insertions(+)
>>>>>  create mode 100644 Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
>>>>>  create mode 100644 drivers/iio/adc/exynos5_adc.c
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
>>>>> new file mode 100644
>>>>> index 0000000..9a5b515
>>>>> --- /dev/null
>>>>> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
>>>>> @@ -0,0 +1,37 @@
>>>>> +Samsung Exynos5 Analog to Digital Converter bindings
>>>>> +
>>>>> +Required properties:
>>>>> +- compatible:                Must be "samsung,exynos5250-adc" for exynos5250 controllers.
>>>>> +- reg:                       Contains ADC register address range (base address and
>>>>> +                     length).
>>>>> +- interrupts:                Contains the interrupt information for the timer. The
>>>>> +                     format is being dependent on which interrupt controller
>>>>> +                     the Samsung device uses.
>>>>> +
>>>>> +Note: child nodes can be added for auto probing from device tree.
>>>>> +
>>>>> +Example: adding device info in dtsi file
>>>>> +
>>>>> +adc@12D10000 {
>>>>> +     compatible = "samsung,exynos5250-adc";
>>>>> +     reg = <0x12D10000 0x100>;
>>>>> +     interrupts = <0 106 0>;
>>>>> +     #address-cells = <1>;
>>>>> +     #size-cells = <1>;
>>>>> +     ranges;
>>>>> +};
>>>>> +
>>>>> +
>>>>> +Example: Adding child nodes in dts file
>>>>> +
>>>>> +adc@12D10000 {
>>>>> +
>>>>> +     /* NTC thermistor is a hwmon device */
>>>>> +     ncp15wb473@0 {
>>>>> +             compatible = "ntc,ncp15wb473";
>>>>> +             reg = <0x0>;
>>>>> +             pullup-uV = <1800000>;
>>>>> +             pullup-ohm = <47000>;
>>>>> +             pulldown-ohm = <0>;
>>>>> +     };
>>>>> +};
>>>>
>>>> How about:
>>>>
>>>>         adc: adc@12D10000 {
>>>>                 compatible = "samsung,exynos5250-adc";
>>>>                 reg = <0x12D10000 0x100>;
>>>>                 interrupts = <0 106 0>;
>>>>                 #io-channel-cells = <1>;
>>>>         };
>>>>
>>>>         ...
>>>>
>>>>         ncp15wb473@0 {
>>>>                 compatible = "ntc,ncp15wb473";
>>>>                 reg = <0x0>; /* is this needed ? */
>>>>                 io-channels = <&adc 0>;
>>>>                 io-channel-names = "adc";
>>>>                 pullup-uV = <1800000>;  /* uV or uv ? */
>>>>                 pullup-ohm = <47000>;
>>>>                 pulldown-ohm = <0>;
>>>>         };
>>>>
>>>> The ncp15wb473 driver would then use either iio_channel_get_all() to get the iio
>>>> channel list or, if it only supports one adc channel per instance, iio_channel_get().
>>>>
>>>> In that context, it would probably make sense to rework the ntc_thermistor
>>>> driver to support both DT as well as direct instantiation using access functions
>>>> and platform data (as it does today).
>>>>
>>>> Also see https://patchwork.kernel.org/patch/2112171/.
>>
>> Hello Guenter,
>>
>> I've rebase my adc driver on top of your (OF for IIO patch)
>>
>> My setup is like the below one. kindly, help me find the right device
>> tree node params
>>
>> One ADC controller with 8 channels,
>>   4 NTC thermistors are connected to channel 3, 4, 5 and 6 of ADC respectively
>>
>> ADC ch - 0
>> ADC ch - 1
>> ADC ch - 2
>> ADC ch - 3 ------------------NTC
>> ADC ch - 4 ------------------NTC
>> ADC ch - 5 ------------------NTC
>> ADC ch - 6 ------------------NTC
>> ADC ch - 7
>>
>> I've started off with something like this.
>>
>>         adc0: adc@12D10000 {
>>                 compatible = "samsung,exynos5250-adc";
>>                 reg = <0x12D10000 0x100>;
>>                 interrupts = <0 106 0>;
>>                 #io-channel-cells = <1>;
>>         };
This is in SOC dtsi file
>>
>>         adc0: adc@12D10000 {
>
> This is a copy paste error, right? you only have one dt node for the adc?
>
>>                 vdd-supply = <&buck5_reg>;
>>
>>                 ncp15wb473@0 {
>>                         compatible = "ntc,ncp15wb473";
>>                         io-channels = <&adc0 3>;
>>                         io-channel-names = "adc3";
>>                         pullup-uV = <1800000>;
>>                         pullup-ohm = <47000>;
>>                         pulldown-ohm = <0>;
>>                         id = <3>;
>>                 };
>>
>>                 ncp15wb473@1 {
>>                         compatible = "ntc,ncp15wb473";
>>                         pullup-uV = <1800000>;
>>                         pullup-ohm = <47000>;
>>                         pulldown-ohm = <0>;
>>                         io-channels = <&adc0 4>;
>>                         io-channel-names = "adc4";
>>                         id = <4>;
>>                 };
>>                 ncp15wb473@2 {
>>                         compatible = "ntc,ncp15wb473";
>>                         pullup-uV = <1800000>;
>>                         pullup-ohm = <47000>;
>>                         pulldown-ohm = <0>;
>>                         io-channels = <&adc0 5>;
>>                         io-channel-names = "adc5";
>>                         id = <5>;
>>                 };
>>                 ncp15wb473@3 {
>>                         compatible = "ntc,ncp15wb473";
>>                         pullup-uV = <1800000>;
>>                         pullup-ohm = <47000>;
>>                         pulldown-ohm = <0>;
>>                         io-channels = <&adc0 6>;
>>                         io-channel-names = "adc6";
>>                         id = <6>;
>>                 };
>>         };
This is in board dts file.
>>
>> ADC driver will use of_platform_populate() to populate the child nodes
>> (ntc thermistors in my case)
>>
>> I've modified the NTC driver to support DT. in probe
>> chan = iio_channel_get(&pdev->dev, "adcX");
>> and using "id" field to use respective ADC channel to do the raw_read()
>
> The beauty of the interface is that the consumer doesn't need to know the
> number of the channel it is using. This is already fully described in the
> io-channels property. Since you only have one channel per consumer just use
>
>         iio_chanel_get(&pdev->dev, NULL)
Right this helped me get the channels properly.

I've a doubt in the driver posted at https://lkml.org/lkml/2013/1/24/2
i don't need to use this anymore right use iio_map_array_register() Right.

Thats so simple then.. Thanks
>
>>
>> Issue:
>> 1. I get weird device names for thermistors starting from ncp15wb473.2
>> to ncp15wb473.5
>> 2. ADC doesn't looks like creating valid channels
>>
>> Any clues please
>>
>>>>
>>>> Thanks,
>>>> Guenter
>>> Yes Guenter, I will rebase and submit the ADC driver based on your patch set.
>>>>
>>>>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>>>>> index fe822a1..33ceabf 100644
>>>>> --- a/drivers/iio/adc/Kconfig
>>>>> +++ b/drivers/iio/adc/Kconfig
>>>>> @@ -91,6 +91,13 @@ config AT91_ADC
>>>>>       help
>>>>>         Say yes here to build support for Atmel AT91 ADC.
>>>>>
>>>>> +config EXYNOS5_ADC
>>>>> +     bool "Exynos5 ADC driver support"
>>>>> +     help
>>>>> +       Core support for the ADC block found in the Samsung EXYNOS5 series
>>>>> +       of SoCs for drivers such as the touchscreen and hwmon to use to share
>>>>> +       this resource.
>>>>> +
>>>>>  config LP8788_ADC
>>>>>       bool "LP8788 ADC driver"
>>>>>       depends on MFD_LP8788
>>>>> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
>>>>> index 2d5f100..5b4a4f6 100644
>>>>> --- a/drivers/iio/adc/Makefile
>>>>> +++ b/drivers/iio/adc/Makefile
>>>>> @@ -10,6 +10,7 @@ obj-$(CONFIG_AD7791) += ad7791.o
>>>>>  obj-$(CONFIG_AD7793) += ad7793.o
>>>>>  obj-$(CONFIG_AD7887) += ad7887.o
>>>>>  obj-$(CONFIG_AT91_ADC) += at91_adc.o
>>>>> +obj-$(CONFIG_EXYNOS5_ADC) += exynos5_adc.o
>>>>>  obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
>>>>>  obj-$(CONFIG_MAX1363) += max1363.o
>>>>>  obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
>>>>> diff --git a/drivers/iio/adc/exynos5_adc.c b/drivers/iio/adc/exynos5_adc.c
>>>>> new file mode 100644
>>>>> index 0000000..8982675
>>>>> --- /dev/null
>>>>> +++ b/drivers/iio/adc/exynos5_adc.c
>>>>> @@ -0,0 +1,464 @@
>>>>> +/*
>>>>> + *  exynos5_adc.c - Support for ADC in EXYNOS5 SoCs
>>>>> + *
>>>>> + *  8 ~ 10 channel, 10/12-bit ADC
>>>>> + *
>>>>> + *  Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
>>>>> + *
>>>>> + *  This program is free software; you can redistribute it and/or modify
>>>>> + *  it under the terms of the GNU General Public License as published by
>>>>> + *  the Free Software Foundation; either version 2 of the License, or
>>>>> + *  (at your option) any later version.
>>>>> + *
>>>>> + *  This program is distributed in the hope that it will be useful,
>>>>> + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>>> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>>>> + *  GNU General Public License for more details.
>>>>> + *
>>>>> + *  You should have received a copy of the GNU General Public License
>>>>> + *  along with this program; if not, write to the Free Software
>>>>> + *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>>>>> + */
>>>>> +
>>>>> +#include <linux/module.h>
>>>>> +#include <linux/platform_device.h>
>>>>> +#include <linux/interrupt.h>
>>>>> +#include <linux/delay.h>
>>>>> +#include <linux/kernel.h>
>>>>> +#include <linux/slab.h>
>>>>> +#include <linux/io.h>
>>>>> +#include <linux/clk.h>
>>>>> +#include <linux/completion.h>
>>>>> +#include <linux/of.h>
>>>>> +#include <linux/of_irq.h>
>>>>> +#include <linux/regulator/consumer.h>
>>>>> +#include <linux/of_platform.h>
>>>>> +
>>>>> +#include <linux/iio/iio.h>
>>>>> +#include <linux/iio/machine.h>
>>>>> +#include <linux/iio/driver.h>
>>>>> +
>>>>> +enum adc_version {
>>>>> +     ADC_V1,
>>>>> +     ADC_V2
>>>>> +};
>>>>> +
>>>>> +/* EXYNOS5250 ADC_V1 registers definitions */
>>>>> +#define ADC_V1_CON(x)                ((x) + 0x00)
>>>>> +#define ADC_V1_DLY(x)                ((x) + 0x08)
>>>>> +#define ADC_V1_DATX(x)               ((x) + 0x0C)
>>>>> +#define ADC_V1_INTCLR(x)     ((x) + 0x18)
>>>>> +#define ADC_V1_MUX(x)                ((x) + 0x1c)
>>>>> +
>>>>> +/* EXYNOS5410 ADC_V2 registers definitions */
>>>>> +#define ADC_V2_CON1(x)               ((x) + 0x00)
>>>>> +#define ADC_V2_CON2(x)               ((x) + 0x04)
>>>>> +#define ADC_V2_STAT(x)               ((x) + 0x08)
>>>>> +#define ADC_V2_INT_EN(x)     ((x) + 0x10)
>>>>> +#define ADC_V2_INT_ST(x)     ((x) + 0x14)
>>>>> +#define ADC_V2_VER(x)                ((x) + 0x20)
>>>>> +
>>>>> +/* Bit definitions for ADC_V1 */
>>>>> +#define ADC_V1_CON_RES               (1u << 16)
>>>>> +#define ADC_V1_CON_PRSCEN    (1u << 14)
>>>>> +#define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6)
>>>>> +#define ADC_V1_CON_STANDBY   (1u << 2)
>>>>> +
>>>>> +/* Bit definitions for ADC_V2 */
>>>>> +#define ADC_V2_CON1_SOFT_RESET       (1u << 2)
>>>>> +
>>>>> +#define ADC_V2_CON2_OSEL     (1u << 10)
>>>>> +#define ADC_V2_CON2_ESEL     (1u << 9)
>>>>> +#define ADC_V2_CON2_HIGHF    (1u << 8)
>>>>> +#define ADC_V2_CON2_C_TIME(x)        (((x) & 7) << 4)
>>>>> +#define ADC_V2_CON2_ACH_SEL(x)       (((x) & 0xF) << 0)
>>>>> +#define ADC_V2_CON2_ACH_MASK 0xF
>>>>> +
>>>>> +/* Bit definitions common for ADC_V1 and ADC_V2 */
>>>>> +#define ADC_V1_CON_EN_START          (1u << 0)
>>>>> +#define ADC_V1_DATX_MASK     0xFFF
>>>>> +
>>>>> +struct exynos5_adc {
>>>>> +     void __iomem            *regs;
>>>>> +     struct clk              *clk;
>>>>> +     unsigned int            irq;
>>>>> +     struct regulator        *vdd;
>>>>> +
>>>>> +     struct completion       completion;
>>>>> +
>>>>> +     struct iio_map          *map;
>>>>> +     u32                     value;
>>>>> +     unsigned int            version;
>>>>> +};
>>>>> +
>>>>> +static const struct of_device_id exynos5_adc_match[] = {
>>>>> +     { .compatible = "samsung,exynos5250-adc", .data = (void *)ADC_V1 },
>>>>> +     { .compatible = "samsung,exynos5410-adc", .data = (void *)ADC_V2 },
>>>>> +     {},
>>>>> +};
>>>>> +MODULE_DEVICE_TABLE(of, exynos5_adc_match);
>>>>> +
>>>>> +static inline unsigned int exynos5_adc_get_version(struct platform_device *pdev)
>>>>> +{
>>>>> +     const struct of_device_id *match;
>>>>> +
>>>>> +     match = of_match_node(exynos5_adc_match, pdev->dev.of_node);
>>>>> +     return (unsigned int)match->data;
>>>>> +}
>>>>> +
>>>>> +/* default maps used by iio consumer (ex: ntc-thermistor driver) */
>>>>> +static struct iio_map exynos5_adc_iio_maps[] = {
>>>>> +     {
>>>>> +             .consumer_dev_name = "0.ncp15wb473",
>>>>> +             .consumer_channel = "adc3",
>>>>> +             .adc_channel_label = "adc3",
>>>>> +     },
>>>>> +     {
>>>>> +             .consumer_dev_name = "1.ncp15wb473",
>>>>> +             .consumer_channel = "adc4",
>>>>> +             .adc_channel_label = "adc4",
>>>>> +     },
>>>>> +     {
>>>>> +             .consumer_dev_name = "2.ncp15wb473",
>>>>> +             .consumer_channel = "adc5",
>>>>> +             .adc_channel_label = "adc5",
>>>>> +     },
>>>>> +     {
>>>>> +             .consumer_dev_name = "3.ncp15wb473",
>>>>> +             .consumer_channel = "adc6",
>>>>> +             .adc_channel_label = "adc6",
>>>>> +     },
>>>>> +     {},
>>>>> +};
>>>>> +
>>>>> +static int exynos5_read_raw(struct iio_dev *indio_dev,
>>>>> +                             struct iio_chan_spec const *chan,
>>>>> +                             int *val,
>>>>> +                             int *val2,
>>>>> +                             long mask)
>>>>> +{
>>>>> +     struct exynos5_adc *info = iio_priv(indio_dev);
>>>>> +     u32 con1, con2;
>>>>> +
>>>>> +     if (mask == IIO_CHAN_INFO_RAW) {
>>>>> +             mutex_lock(&indio_dev->mlock);
>>>>> +
>>>>> +             /* Select the channel to be used and Trigger conversion */
>>>>> +             if (info->version == ADC_V2) {
>>>>> +                     con2 = readl(ADC_V2_CON2(info->regs));
>>>>> +                     con2 &= ~ADC_V2_CON2_ACH_MASK;
>>>>> +                     con2 |= ADC_V2_CON2_ACH_SEL(chan->address);
>>>>> +                     writel(con2, ADC_V2_CON2(info->regs));
>>>>> +
>>>>> +                     con1 = readl(ADC_V2_CON1(info->regs));
>>>>> +                     writel(con1 | ADC_V1_CON_EN_START,
>>>>> +                                     ADC_V2_CON1(info->regs));
>>>>> +             } else {
>>>>> +                     writel(chan->address, ADC_V1_MUX(info->regs));
>>>>> +
>>>>> +                     con1 = readl(ADC_V1_CON(info->regs));
>>>>> +                     writel(con1 | ADC_V1_CON_EN_START,
>>>>> +                                     ADC_V1_CON(info->regs));
>>>>> +             }
>>>>> +
>>>>> +             wait_for_completion(&info->completion);
>>>>> +             *val = info->value;
>>>>> +
>>>>> +             mutex_unlock(&indio_dev->mlock);
>>>>> +
>>>>> +             return IIO_VAL_INT;
>>>>> +     }
>>>>> +
>>>>> +     return -EINVAL;
>>>>> +}
>>>>> +
>>>>> +static irqreturn_t exynos5_adc_isr(int irq, void *dev_id)
>>>>> +{
>>>>> +     struct exynos5_adc *info = (struct exynos5_adc *)dev_id;
>>>>> +
>>>>> +     /* Read value */
>>>>> +     info->value = readl(ADC_V1_DATX(info->regs)) &
>>>>> +                                             ADC_V1_DATX_MASK;
>>>>> +     /* clear irq */
>>>>> +     if (info->version == ADC_V2)
>>>>> +             writel(1, ADC_V2_INT_ST(info->regs));
>>>>> +     else
>>>>> +             writel(1, ADC_V1_INTCLR(info->regs));
>>>>> +
>>>>> +     complete(&info->completion);
>>>>> +
>>>>> +     return IRQ_HANDLED;
>>>>> +}
>>>>> +
>>>>> +static int exynos5_adc_reg_access(struct iio_dev *indio_dev,
>>>>> +                           unsigned reg, unsigned writeval,
>>>>> +                           unsigned *readval)
>>>>> +{
>>>>> +     struct exynos5_adc *info = iio_priv(indio_dev);
>>>>> +     u32 ret;
>>>>> +
>>>>> +     mutex_lock(&indio_dev->mlock);
>>>>> +
>>>>> +     if (readval != NULL) {
>>>>> +             ret = readl(info->regs + reg);
>>>>> +             *readval = ret;
>>>>> +     } else
>>>>> +             ret = -EINVAL;
>>>>> +
>>>>> +     mutex_unlock(&indio_dev->mlock);
>>>>> +
>>>>> +     return ret;
>>>>> +}
>>>>> +
>>>>> +static const struct iio_info exynos5_adc_iio_info = {
>>>>> +     .read_raw = &exynos5_read_raw,
>>>>> +     .debugfs_reg_access = &exynos5_adc_reg_access,
>>>>> +     .driver_module = THIS_MODULE,
>>>>> +};
>>>>> +
>>>>> +#define ADC_V1_CHANNEL(_index, _id) {                \
>>>>> +     .type = IIO_VOLTAGE,                            \
>>>>> +     .indexed = 1,                                   \
>>>>> +     .channel = _index,                              \
>>>>> +     .address = _index,                              \
>>>>> +     .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,    \
>>>>> +     .datasheet_name = _id,                          \
>>>>> +}
>>>>> +
>>>>> +/** ADC core in EXYNOS5410 has 10 channels,
>>>>> + * ADC core in EXYNOS5250 has 8 channels
>>>>> +*/
>>>>> +static const struct iio_chan_spec exynos5_adc_iio_channels[] = {
>>>>> +     ADC_V1_CHANNEL(0, "adc0"),
>>>>> +     ADC_V1_CHANNEL(1, "adc1"),
>>>>> +     ADC_V1_CHANNEL(2, "adc2"),
>>>>> +     ADC_V1_CHANNEL(3, "adc3"),
>>>>> +     ADC_V1_CHANNEL(4, "adc4"),
>>>>> +     ADC_V1_CHANNEL(5, "adc5"),
>>>>> +     ADC_V1_CHANNEL(6, "adc6"),
>>>>> +     ADC_V1_CHANNEL(7, "adc7"),
>>>>> +     ADC_V1_CHANNEL(8, "adc8"),
>>>>> +     ADC_V1_CHANNEL(9, "adc9"),
>>>>> +};
>>>>> +
>>>>> +static int exynos5_adc_remove_devices(struct device *dev, void *c)
>>>>> +{
>>>>> +     struct platform_device *pdev = to_platform_device(dev);
>>>>> +
>>>>> +     platform_device_unregister(pdev);
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +static void exynos5_adc_hw_init(struct exynos5_adc *info)
>>>>> +{
>>>>> +     u32 con1, con2;
>>>>> +
>>>>> +     if (info->version == ADC_V2) {
>>>>> +             con1 = ADC_V2_CON1_SOFT_RESET;
>>>>> +             writel(con1, ADC_V2_CON1(info->regs));
>>>>> +
>>>>> +             con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
>>>>> +                     ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
>>>>> +             writel(con2, ADC_V2_CON2(info->regs));
>>>>> +
>>>>> +             /* Enable interrupts */
>>>>> +             writel(1, ADC_V2_INT_EN(info->regs));
>>>>> +     } else {
>>>>> +             /* set default prescaler values and Enable prescaler */
>>>>> +             con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
>>>>> +
>>>>> +             /* Enable 12-bit ADC resolution */
>>>>> +             con1 |= ADC_V1_CON_RES;
>>>>> +             writel(con1, ADC_V1_CON(info->regs));
>>>>> +     }
>>>>> +}
>>>>> +
>>>>> +static int exynos5_adc_probe(struct platform_device *pdev)
>>>>> +{
>>>>> +     struct exynos5_adc *info = NULL;
>>>>> +     struct device_node *np = pdev->dev.of_node;
>>>>> +     struct iio_dev *indio_dev = NULL;
>>>>> +     struct resource *mem;
>>>>> +     int ret = -ENODEV;
>>>>> +     int irq;
>>>>> +
>>>>> +     if (!np)
>>>>> +             return ret;
>>>>> +
>>>>> +     indio_dev = iio_device_alloc(sizeof(struct exynos5_adc));
>>>>> +     if (!indio_dev) {
>>>>> +             dev_err(&pdev->dev, "failed allocating iio device\n");
>>>>> +             return -ENOMEM;
>>>>> +     }
>>>>> +
>>>>> +     info = iio_priv(indio_dev);
>>>>> +
>>>>> +     mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>>> +
>>>>> +     info->regs = devm_request_and_ioremap(&pdev->dev, mem);
>>>>> +
>>>>> +     irq = platform_get_irq(pdev, 0);
>>>>> +     if (irq < 0) {
>>>>> +             dev_err(&pdev->dev, "no irq resource?\n");
>>>>> +             ret = irq;
>>>>> +             goto err_iio;
>>>>> +     }
>>>>> +
>>>>> +     info->irq = irq;
>>>>> +
>>>>> +     ret = request_irq(info->irq, exynos5_adc_isr,
>>>>> +                                     0, dev_name(&pdev->dev), info);
>>>>> +     if (ret < 0) {
>>>>> +             dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
>>>>> +                                                     info->irq);
>>>>> +             goto err_iio;
>>>>> +     }
>>>>> +
>>>>> +     info->clk = devm_clk_get(&pdev->dev, "adc");
>>>>> +     if (IS_ERR(info->clk)) {
>>>>> +             dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
>>>>> +                                                     PTR_ERR(info->clk));
>>>>> +             ret = PTR_ERR(info->clk);
>>>>> +             goto err_irq;
>>>>> +     }
>>>>> +
>>>>> +     info->vdd = devm_regulator_get(&pdev->dev, "vdd");
>>>>> +     if (IS_ERR(info->vdd)) {
>>>>> +             dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
>>>>> +                                                     PTR_ERR(info->vdd));
>>>>> +             ret = PTR_ERR(info->vdd);
>>>>> +             goto err_irq;
>>>>> +     }
>>>>> +
>>>>> +     info->version = exynos5_adc_get_version(pdev);
>>>>> +
>>>>> +     platform_set_drvdata(pdev, indio_dev);
>>>>> +
>>>>> +     init_completion(&info->completion);
>>>>> +
>>>>> +     indio_dev->name = dev_name(&pdev->dev);
>>>>> +     indio_dev->dev.parent = &pdev->dev;
>>>>> +     indio_dev->dev.of_node = pdev->dev.of_node;
>>>>> +     indio_dev->info = &exynos5_adc_iio_info;
>>>>> +     indio_dev->modes = INDIO_DIRECT_MODE;
>>>>> +     indio_dev->channels = exynos5_adc_iio_channels;
>>>>> +     indio_dev->num_channels = ARRAY_SIZE(exynos5_adc_iio_channels);
>>>>> +
>>>>> +     info->map = exynos5_adc_iio_maps;
>>>>> +
>>>>> +     ret = iio_map_array_register(indio_dev, info->map);
>>>>> +     if (ret) {
>>>>> +             dev_err(&indio_dev->dev, "failed mapping iio, err: %d\n", ret);
>>>>> +             goto err_irq;
>>>>> +     }
>>>>> +
>>>>> +     ret = iio_device_register(indio_dev);
>>>>> +     if (ret)
>>>>> +             goto err_map;
>>>>> +
>>>>> +     ret = regulator_enable(info->vdd);
>>>>> +     if (ret)
>>>>> +             goto err_iio_dev;
>>>>> +
>>>>> +     clk_prepare_enable(info->clk);
>>>>> +
>>>>> +     exynos5_adc_hw_init(info);
>>>>> +
>>>>> +     ret = of_platform_populate(np, exynos5_adc_match, NULL, &pdev->dev);
>>>>> +     if (ret < 0) {
>>>>> +             dev_err(&pdev->dev, "failed adding child nodes\n");
>>>>> +             goto err_of_populate;
>>>>> +     }
>>>>> +
>>>>> +     return 0;
>>>>> +
>>>>> +err_of_populate:
>>>>> +     device_for_each_child(&pdev->dev, NULL, exynos5_adc_remove_devices);
>>>>> +err_iio_dev:
>>>>> +     iio_device_unregister(indio_dev);
>>>>> +err_map:
>>>>> +     iio_map_array_unregister(indio_dev, info->map);
>>>>> +err_irq:
>>>>> +     free_irq(info->irq, info);
>>>>> +err_iio:
>>>>> +     iio_device_free(indio_dev);
>>>>> +     return ret;
>>>>> +}
>>>>> +
>>>>> +static int exynos5_adc_remove(struct platform_device *pdev)
>>>>> +{
>>>>> +     struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>>>>> +     struct exynos5_adc *info = iio_priv(indio_dev);
>>>>> +
>>>>> +     iio_device_unregister(indio_dev);
>>>>> +     iio_map_array_unregister(indio_dev, info->map);
>>>>> +     free_irq(info->irq, info);
>>>>> +     iio_device_free(indio_dev);
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +#ifdef CONFIG_PM_SLEEP
>>>>> +static int exynos5_adc_suspend(struct device *dev)
>>>>> +{
>>>>> +     struct exynos5_adc *info = dev_get_data(dev);
>>>>> +     u32 con;
>>>>> +
>>>>> +     if (info->version == ADC_V2) {
>>>>> +             con = readl(ADC_V2_CON1(info->regs));
>>>>> +             con &= ~ADC_V1_CON_EN_START;
>>>>> +             writel(con, ADC_V2_CON1(info->regs));
>>>>> +     } else {
>>>>> +             con = readl(ADC_V1_CON(info->regs));
>>>>> +             con |= ADC_V1_CON_STANDBY;
>>>>> +             writel(con, ADC_V1_CON(info->regs));
>>>>> +     }
>>>>> +
>>>>> +     clk_unprepare_disable(info->clk);
>>>>> +     regulator_disable(info->vdd);
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +static int exynos5_adc_resume(struct device *dev)
>>>>> +{
>>>>> +     struct exynos5_adc *info = dev_get_data(dev);
>>>>> +     int ret;
>>>>> +
>>>>> +     ret = regulator_enable(info->vdd);
>>>>> +     if (ret)
>>>>> +             return ret;
>>>>> +
>>>>> +     clk_prepare_enable(info->clk);
>>>>> +
>>>>> +     exynos5_adc_hw_init(info);
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +#else
>>>>> +#define exynos5_adc_suspend NULL
>>>>> +#define exynos5_adc_resume NULL
>>>>> +#endif
>>>>> +
>>>>> +static SIMPLE_DEV_PM_OPS(exynos5_adc_pm_ops,
>>>>> +                     exynos5_adc_suspend,
>>>>> +                     exynos5_adc_resume);
>>>>> +
>>>>> +static struct platform_driver exynos5_adc_driver = {
>>>>> +     .probe          = exynos5_adc_probe,
>>>>> +     .remove         = exynos5_adc_remove,
>>>>> +     .driver         = {
>>>>> +             .name   = "exynos5-adc",
>>>>> +             .owner  = THIS_MODULE,
>>>>> +             .of_match_table = of_match_ptr(exynos5_adc_match),
>>>>> +             .pm     = &exynos5_adc_pm_ops,
>>>>> +     },
>>>>> +};
>>>>> +
>>>>> +module_platform_driver(exynos5_adc_driver);
>>>>> +
>>>>> +MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>");
>>>>> +MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver");
>>>>> +MODULE_LICENSE("GPL");
>>>
>>>
>>>
>>> --
>>> Shine bright,
>>> (: Nav :)
>>
>>
>>
>> --
>> Shine bright,
>> (: Nav :)
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>



--
Shine bright,
(: Nav :)
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux