Re: [PATCH] iio: adc: add exynos5 adc driver under iio framwork

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 26 January 2013 16:27, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> On 01/24/2013 04:58 AM, Naveen Krishna Chatradhi wrote:
>> This patch adds driver for ADC IP found on EXYNOS5250 and EXYNOS5410
>> from Samsung. Also adds the Documentation for device tree bindings.
>>
>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
> Just a quick general comment on patch formatting. For later versions give
> a title of
> [PATCH V5]...
> to the email as then it's easy for those of us who have been sitting
> back and quitely not reading the thread to figure out which the latest
> patch is.
>
> Thanks
>
> Jonathan
Sure Jonathan (I was assuming using message id would be enough), i
will correct it.
>
>> ---
>> Changes since v1:
>>
>> 1. Fixed comments from Lars
>> 2. Added support for ADC on EXYNOS5410
>>
>> Changes since v2:
>>
>> 1. Changed the instance name for (struct iio_dev *) to indio_dev
>> 2. Changed devm_request_irq to request_irq
>>
>> Few doubts regarding the mappings and child device handling.
>> Kindly, suggest me better methods.
>>
>> Changes since v3:
>>
>> 1. Added clk_prepare_disable and regulator_disable calls in _remove()
>> 2. Moved init_completion before irq_request
>> 3. Added NULL pointer check for devm_request_and_ioremap() return value.
>> 4. Use number of channels as per the ADC version
>> 5. Change the define ADC_V1_CHANNEL to ADC_CHANNEL
>> 6. Update the Documentation to include EXYNOS5410 compatible
>>
>> Doug, i've used
>>       chan = iio_channel_get(dev_name(&pdev->dev), "adc3");
>> in ntc thermistor driver during probe and
>>       iio_read_channel_raw(chan, &val);
>> for read.
>>
>> But, then the drivers become kind of coupled. Right.
>>
>> Lars, Is there an other way.
>>
>> Thanks for the comments
>>
>>  .../bindings/arm/samsung/exynos5-adc.txt           |   38 ++
>>  drivers/iio/adc/Kconfig                            |    7 +
>>  drivers/iio/adc/Makefile                           |    1 +
>>  drivers/iio/adc/exynos5_adc.c                      |  475 ++++++++++++++++++++
>>  4 files changed, 521 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
>>  create mode 100644 drivers/iio/adc/exynos5_adc.c
>>
>> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
>> new file mode 100644
>> index 0000000..0f281d9
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
>> @@ -0,0 +1,38 @@
>> +Samsung Exynos5 Analog to Digital Converter bindings
>> +
>> +Required properties:
>> +- compatible:                Must be "samsung,exynos5250-adc" for exynos5250 controllers.
>> +                     Must be "samsung,exynos5410-adc" for exynos5410 controllers.
>> +- reg:                       Contains ADC register address range (base address and
>> +                     length).
>> +- interrupts:                Contains the interrupt information for the timer. The
>> +                     format is being dependent on which interrupt controller
>> +                     the Samsung device uses.
>> +
>> +Note: child nodes can be added for auto probing from device tree.
>> +
>> +Example: adding device info in dtsi file
>> +
>> +adc@12D10000 {
>> +     compatible = "samsung,exynos5250-adc";
>> +     reg = <0x12D10000 0x100>;
>> +     interrupts = <0 106 0>;
>> +     #address-cells = <1>;
>> +     #size-cells = <1>;
>> +     ranges;
>> +};
>> +
>> +
>> +Example: Adding child nodes in dts file
>> +
>> +adc@12D10000 {
>> +
>> +     /* NTC thermistor is a hwmon device */
>> +     ncp15wb473@0 {
>> +             compatible = "ntc,ncp15wb473";
>> +             reg = <0x0>;
>> +             pullup-uV = <1800000>;
>> +             pullup-ohm = <47000>;
>> +             pulldown-ohm = <0>;
>> +     };
>> +};
>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>> index fe822a1..33ceabf 100644
>> --- a/drivers/iio/adc/Kconfig
>> +++ b/drivers/iio/adc/Kconfig
>> @@ -91,6 +91,13 @@ config AT91_ADC
>>       help
>>         Say yes here to build support for Atmel AT91 ADC.
>>
>> +config EXYNOS5_ADC
>> +     bool "Exynos5 ADC driver support"
>> +     help
>> +       Core support for the ADC block found in the Samsung EXYNOS5 series
>> +       of SoCs for drivers such as the touchscreen and hwmon to use to share
>> +       this resource.
>> +
>>  config LP8788_ADC
>>       bool "LP8788 ADC driver"
>>       depends on MFD_LP8788
>> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
>> index 2d5f100..5b4a4f6 100644
>> --- a/drivers/iio/adc/Makefile
>> +++ b/drivers/iio/adc/Makefile
>> @@ -10,6 +10,7 @@ obj-$(CONFIG_AD7791) += ad7791.o
>>  obj-$(CONFIG_AD7793) += ad7793.o
>>  obj-$(CONFIG_AD7887) += ad7887.o
>>  obj-$(CONFIG_AT91_ADC) += at91_adc.o
>> +obj-$(CONFIG_EXYNOS5_ADC) += exynos5_adc.o
>>  obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
>>  obj-$(CONFIG_MAX1363) += max1363.o
>>  obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
>> diff --git a/drivers/iio/adc/exynos5_adc.c b/drivers/iio/adc/exynos5_adc.c
>> new file mode 100644
>> index 0000000..4963649
>> --- /dev/null
>> +++ b/drivers/iio/adc/exynos5_adc.c
>> @@ -0,0 +1,475 @@
>> +/*
>> + *  exynos5_adc.c - Support for ADC in EXYNOS5 SoCs
>> + *
>> + *  8 ~ 10 channel, 10/12-bit ADC
>> + *
>> + *  Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
>> + *
>> + *  This program is free software; you can redistribute it and/or modify
>> + *  it under the terms of the GNU General Public License as published by
>> + *  the Free Software Foundation; either version 2 of the License, or
>> + *  (at your option) any later version.
>> + *
>> + *  This program is distributed in the hope that it will be useful,
>> + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + *  GNU General Public License for more details.
>> + *
>> + *  You should have received a copy of the GNU General Public License
>> + *  along with this program; if not, write to the Free Software
>> + *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/delay.h>
>> +#include <linux/kernel.h>
>> +#include <linux/slab.h>
>> +#include <linux/io.h>
>> +#include <linux/clk.h>
>> +#include <linux/completion.h>
>> +#include <linux/of.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/of_platform.h>
>> +
>> +#include <linux/iio/iio.h>
>> +#include <linux/iio/machine.h>
>> +#include <linux/iio/driver.h>
>> +
>> +enum adc_version {
>> +     ADC_V1,
>> +     ADC_V2
>> +};
>> +
>> +/* EXYNOS5250 ADC_V1 registers definitions */
>> +#define ADC_V1_CON(x)                ((x) + 0x00)
>> +#define ADC_V1_DLY(x)                ((x) + 0x08)
>> +#define ADC_V1_DATX(x)               ((x) + 0x0C)
>> +#define ADC_V1_INTCLR(x)     ((x) + 0x18)
>> +#define ADC_V1_MUX(x)                ((x) + 0x1c)
>> +
>> +/* EXYNOS5410 ADC_V2 registers definitions */
>> +#define ADC_V2_CON1(x)               ((x) + 0x00)
>> +#define ADC_V2_CON2(x)               ((x) + 0x04)
>> +#define ADC_V2_STAT(x)               ((x) + 0x08)
>> +#define ADC_V2_INT_EN(x)     ((x) + 0x10)
>> +#define ADC_V2_INT_ST(x)     ((x) + 0x14)
>> +#define ADC_V2_VER(x)                ((x) + 0x20)
>> +
>> +/* Bit definitions for ADC_V1 */
>> +#define ADC_V1_CON_RES               (1u << 16)
>> +#define ADC_V1_CON_PRSCEN    (1u << 14)
>> +#define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6)
>> +#define ADC_V1_CON_STANDBY   (1u << 2)
>> +
>> +/* Bit definitions for ADC_V2 */
>> +#define ADC_V2_CON1_SOFT_RESET       (1u << 2)
>> +
>> +#define ADC_V2_CON2_OSEL     (1u << 10)
>> +#define ADC_V2_CON2_ESEL     (1u << 9)
>> +#define ADC_V2_CON2_HIGHF    (1u << 8)
>> +#define ADC_V2_CON2_C_TIME(x)        (((x) & 7) << 4)
>> +#define ADC_V2_CON2_ACH_SEL(x)       (((x) & 0xF) << 0)
>> +#define ADC_V2_CON2_ACH_MASK 0xF
>> +
>> +/* Bit definitions common for ADC_V1 and ADC_V2 */
>> +#define ADC_V1_CON_EN_START          (1u << 0)
>> +#define ADC_V1_DATX_MASK     0xFFF
>> +
>> +struct exynos5_adc {
>> +     void __iomem            *regs;
>> +     struct clk              *clk;
>> +     unsigned int            irq;
>> +     struct regulator        *vdd;
>> +
>> +     struct completion       completion;
>> +
>> +     struct iio_map          *map;
>> +     u32                     value;
>> +     unsigned int            version;
>> +};
>> +
>> +static const struct of_device_id exynos5_adc_match[] = {
>> +     { .compatible = "samsung,exynos5250-adc", .data = (void *)ADC_V1 },
>> +     { .compatible = "samsung,exynos5410-adc", .data = (void *)ADC_V2 },
>> +     {},
>> +};
>> +MODULE_DEVICE_TABLE(of, exynos5_adc_match);
>> +
>> +static inline unsigned int exynos5_adc_get_version(struct platform_device *pdev)
>> +{
>> +     const struct of_device_id *match;
>> +
>> +     match = of_match_node(exynos5_adc_match, pdev->dev.of_node);
>> +     return (unsigned int)match->data;
>> +}
>> +
>> +/* default maps used by iio consumer (ex: ntc-thermistor driver) */
>> +static struct iio_map exynos5_adc_iio_map[] = {
>> +     {
>> +             .consumer_dev_name = "0.ncp15wb473",
>> +             .consumer_channel = "adc3",
>> +             .adc_channel_label = "adc3",
>> +     },
>> +     {
>> +             .consumer_dev_name = "1.ncp15wb473",
>> +             .consumer_channel = "adc4",
>> +             .adc_channel_label = "adc4",
>> +     },
>> +     {
>> +             .consumer_dev_name = "2.ncp15wb473",
>> +             .consumer_channel = "adc5",
>> +             .adc_channel_label = "adc5",
>> +     },
>> +     {
>> +             .consumer_dev_name = "3.ncp15wb473",
>> +             .consumer_channel = "adc6",
>> +             .adc_channel_label = "adc6",
>> +     },
>> +     {},
>> +};
>> +
>> +static int exynos5_read_raw(struct iio_dev *indio_dev,
>> +                             struct iio_chan_spec const *chan,
>> +                             int *val,
>> +                             int *val2,
>> +                             long mask)
>> +{
>> +     struct exynos5_adc *info = iio_priv(indio_dev);
>> +     u32 con1, con2;
>> +
>> +     if (mask == IIO_CHAN_INFO_RAW) {
>> +             mutex_lock(&indio_dev->mlock);
>> +
>> +             /* Select the channel to be used and Trigger conversion */
>> +             if (info->version == ADC_V2) {
>> +                     con2 = readl(ADC_V2_CON2(info->regs));
>> +                     con2 &= ~ADC_V2_CON2_ACH_MASK;
>> +                     con2 |= ADC_V2_CON2_ACH_SEL(chan->address);
>> +                     writel(con2, ADC_V2_CON2(info->regs));
>> +
>> +                     con1 = readl(ADC_V2_CON1(info->regs));
>> +                     writel(con1 | ADC_V1_CON_EN_START,
>> +                                     ADC_V2_CON1(info->regs));
>> +             } else {
>> +                     writel(chan->address, ADC_V1_MUX(info->regs));
>> +
>> +                     con1 = readl(ADC_V1_CON(info->regs));
>> +                     writel(con1 | ADC_V1_CON_EN_START,
>> +                                     ADC_V1_CON(info->regs));
>> +             }
>> +
>> +             wait_for_completion(&info->completion);
>> +             *val = info->value;
>> +
>> +             mutex_unlock(&indio_dev->mlock);
>> +
>> +             return IIO_VAL_INT;
>> +     }
>> +
>> +     return -EINVAL;
>> +}
>> +
>> +static irqreturn_t exynos5_adc_isr(int irq, void *dev_id)
>> +{
>> +     struct exynos5_adc *info = (struct exynos5_adc *)dev_id;
>> +
>> +     /* Read value */
>> +     info->value = readl(ADC_V1_DATX(info->regs)) &
>> +                                             ADC_V1_DATX_MASK;
>> +     /* clear irq */
>> +     if (info->version == ADC_V2)
>> +             writel(1, ADC_V2_INT_ST(info->regs));
>> +     else
>> +             writel(1, ADC_V1_INTCLR(info->regs));
>> +
>> +     complete(&info->completion);
>> +
>> +     return IRQ_HANDLED;
>> +}
>> +
>> +static int exynos5_adc_reg_access(struct iio_dev *indio_dev,
>> +                           unsigned reg, unsigned writeval,
>> +                           unsigned *readval)
>> +{
>> +     struct exynos5_adc *info = iio_priv(indio_dev);
>> +     u32 ret;
>> +
>> +     mutex_lock(&indio_dev->mlock);
>> +
>> +     if (readval != NULL) {
>> +             ret = readl(info->regs + reg);
>> +             *readval = ret;
>> +     } else
>> +             ret = -EINVAL;
>> +
>> +     mutex_unlock(&indio_dev->mlock);
>> +
>> +     return ret;
>> +}
>> +
>> +static const struct iio_info exynos5_adc_iio_info = {
>> +     .read_raw = &exynos5_read_raw,
>> +     .debugfs_reg_access = &exynos5_adc_reg_access,
>> +     .driver_module = THIS_MODULE,
>> +};
>> +
>> +#define ADC_CHANNEL(_index, _id) {                   \
>> +     .type = IIO_VOLTAGE,                            \
>> +     .indexed = 1,                                   \
>> +     .channel = _index,                              \
>> +     .address = _index,                              \
>> +     .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,    \
>> +     .datasheet_name = _id,                          \
>> +}
>> +
>> +static const struct iio_chan_spec exynos5_adc_iio_channels[] = {
>> +     ADC_CHANNEL(0, "adc0"),
>> +     ADC_CHANNEL(1, "adc1"),
>> +     ADC_CHANNEL(2, "adc2"),
>> +     ADC_CHANNEL(3, "adc3"),
>> +     ADC_CHANNEL(4, "adc4"),
>> +     ADC_CHANNEL(5, "adc5"),
>> +     ADC_CHANNEL(6, "adc6"),
>> +     ADC_CHANNEL(7, "adc7"),
>> +     ADC_CHANNEL(8, "adc8"),
>> +     ADC_CHANNEL(9, "adc9"),
>> +};
>> +
>> +static int exynos5_adc_remove_devices(struct device *dev, void *c)
>> +{
>> +     struct platform_device *pdev = to_platform_device(dev);
>> +
>> +     platform_device_unregister(pdev);
>> +
>> +     return 0;
>> +}
>> +
>> +static void exynos5_adc_hw_init(struct exynos5_adc *info)
>> +{
>> +     u32 con1, con2;
>> +
>> +     if (info->version == ADC_V2) {
>> +             con1 = ADC_V2_CON1_SOFT_RESET;
>> +             writel(con1, ADC_V2_CON1(info->regs));
>> +
>> +             con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
>> +                     ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
>> +             writel(con2, ADC_V2_CON2(info->regs));
>> +
>> +             /* Enable interrupts */
>> +             writel(1, ADC_V2_INT_EN(info->regs));
>> +     } else {
>> +             /* set default prescaler values and Enable prescaler */
>> +             con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
>> +
>> +             /* Enable 12-bit ADC resolution */
>> +             con1 |= ADC_V1_CON_RES;
>> +             writel(con1, ADC_V1_CON(info->regs));
>> +     }
>> +}
>> +
>> +static int exynos5_adc_probe(struct platform_device *pdev)
>> +{
>> +     struct exynos5_adc *info = NULL;
>> +     struct device_node *np = pdev->dev.of_node;
>> +     struct iio_dev *indio_dev = NULL;
>> +     struct resource *mem;
>> +     int ret = -ENODEV;
>> +     int irq;
>> +
>> +     if (!np)
>> +             return ret;
>> +
>> +     indio_dev = iio_device_alloc(sizeof(struct exynos5_adc));
>> +     if (!indio_dev) {
>> +             dev_err(&pdev->dev, "failed allocating iio device\n");
>> +             return -ENOMEM;
>> +     }
>> +
>> +     info = iio_priv(indio_dev);
>> +
>> +     mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +
>> +     info->regs = devm_request_and_ioremap(&pdev->dev, mem);
>> +     if (!info->regs)
>> +             return -ENOMEM;
>> +
>> +     irq = platform_get_irq(pdev, 0);
>> +     if (irq < 0) {
>> +             dev_err(&pdev->dev, "no irq resource?\n");
>> +             ret = irq;
>> +             goto err_iio;
>> +     }
>> +
>> +     info->irq = irq;
>> +
>> +     init_completion(&info->completion);
>> +
>> +     ret = request_irq(info->irq, exynos5_adc_isr,
>> +                                     0, dev_name(&pdev->dev), info);
>> +     if (ret < 0) {
>> +             dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
>> +                                                     info->irq);
>> +             goto err_iio;
>> +     }
>> +
>> +     info->clk = devm_clk_get(&pdev->dev, "adc");
>> +     if (IS_ERR(info->clk)) {
>> +             dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
>> +                                                     PTR_ERR(info->clk));
>> +             ret = PTR_ERR(info->clk);
>> +             goto err_irq;
>> +     }
>> +
>> +     info->vdd = devm_regulator_get(&pdev->dev, "vdd");
>> +     if (IS_ERR(info->vdd)) {
>> +             dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
>> +                                                     PTR_ERR(info->vdd));
>> +             ret = PTR_ERR(info->vdd);
>> +             goto err_irq;
>> +     }
>> +
>> +     info->version = exynos5_adc_get_version(pdev);
>> +
>> +     platform_set_drvdata(pdev, indio_dev);
>> +
>> +     indio_dev->name = dev_name(&pdev->dev);
>> +     indio_dev->dev.parent = &pdev->dev;
>> +     indio_dev->dev.of_node = pdev->dev.of_node;
>> +     indio_dev->info = &exynos5_adc_iio_info;
>> +     indio_dev->modes = INDIO_DIRECT_MODE;
>> +     indio_dev->channels = exynos5_adc_iio_channels;
>> +
>> +     if (info->version == ADC_V1)
>> +             /* ADC core in EXYNOS5250 has 8 channels */
>> +             indio_dev->num_channels =
>> +                             ARRAY_SIZE(exynos5_adc_iio_channels) - 2;
>> +     else
>> +             /* ADC core in EXYNOS5410 has 10 channels */
>> +             indio_dev->num_channels =
>> +                             ARRAY_SIZE(exynos5_adc_iio_channels);
>> +
>> +     info->map = exynos5_adc_iio_map;
>> +
>> +     ret = iio_map_array_register(indio_dev, info->map);
>> +     if (ret) {
>> +             dev_err(&indio_dev->dev, "failed mapping iio, err: %d\n", ret);
>> +             goto err_irq;
>> +     }
>> +
>> +     ret = iio_device_register(indio_dev);
>> +     if (ret)
>> +             goto err_map;
>> +
>> +     ret = regulator_enable(info->vdd);
>> +     if (ret)
>> +             goto err_iio_dev;
>> +
>> +     clk_prepare_enable(info->clk);
>> +
>> +     exynos5_adc_hw_init(info);
>> +
>> +     ret = of_platform_populate(np, exynos5_adc_match, NULL, &pdev->dev);
>> +     if (ret < 0) {
>> +             dev_err(&pdev->dev, "failed adding child nodes\n");
>> +             goto err_of_populate;
>> +     }
>> +
>> +     return 0;
>> +
>> +err_of_populate:
>> +     device_for_each_child(&pdev->dev, NULL, exynos5_adc_remove_devices);
>> +     clk_disable_unprepare(info->clk);
>> +     regulator_disable(info->vdd);
>> +err_iio_dev:
>> +     iio_device_unregister(indio_dev);
>> +err_map:
>> +     iio_map_array_unregister(indio_dev, info->map);
>> +err_irq:
>> +     free_irq(info->irq, info);
>> +err_iio:
>> +     iio_device_free(indio_dev);
>> +     return ret;
>> +}
>> +
>> +static int exynos5_adc_remove(struct platform_device *pdev)
>> +{
>> +     struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>> +     struct exynos5_adc *info = iio_priv(indio_dev);
>> +
>> +     clk_disable_unprepare(info->clk);
>> +     regulator_disable(info->vdd);
>> +     iio_device_unregister(indio_dev);
>> +     iio_map_array_unregister(indio_dev, info->map);
>> +     free_irq(info->irq, info);
>> +     iio_device_free(indio_dev);
>> +
>> +     return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int exynos5_adc_suspend(struct device *dev)
>> +{
>> +     struct exynos5_adc *info = dev_get_data(dev);
>> +     u32 con;
>> +
>> +     if (info->version == ADC_V2) {
>> +             con = readl(ADC_V2_CON1(info->regs));
>> +             con &= ~ADC_V1_CON_EN_START;
>> +             writel(con, ADC_V2_CON1(info->regs));
>> +     } else {
>> +             con = readl(ADC_V1_CON(info->regs));
>> +             con |= ADC_V1_CON_STANDBY;
>> +             writel(con, ADC_V1_CON(info->regs));
>> +     }
>> +
>> +     clk_disable_unprepare(info->clk);
>> +     regulator_disable(info->vdd);
>> +
>> +     return 0;
>> +}
>> +
>> +static int exynos5_adc_resume(struct device *dev)
>> +{
>> +     struct exynos5_adc *info = dev_get_data(dev);
>> +     int ret;
>> +
>> +     ret = regulator_enable(info->vdd);
>> +     if (ret)
>> +             return ret;
>> +
>> +     clk_prepare_enable(info->clk);
>> +
>> +     exynos5_adc_hw_init(info);
>> +
>> +     return 0;
>> +}
>> +
>> +#else
>> +#define exynos5_adc_suspend NULL
>> +#define exynos5_adc_resume NULL
>> +#endif
>> +
>> +static SIMPLE_DEV_PM_OPS(exynos5_adc_pm_ops,
>> +                     exynos5_adc_suspend,
>> +                     exynos5_adc_resume);
>> +
>> +static struct platform_driver exynos5_adc_driver = {
>> +     .probe          = exynos5_adc_probe,
>> +     .remove         = exynos5_adc_remove,
>> +     .driver         = {
>> +             .name   = "exynos5-adc",
>> +             .owner  = THIS_MODULE,
>> +             .of_match_table = of_match_ptr(exynos5_adc_match),
>> +             .pm     = &exynos5_adc_pm_ops,
>> +     },
>> +};
>> +
>> +module_platform_driver(exynos5_adc_driver);
>> +
>> +MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>");
>> +MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver");
>> +MODULE_LICENSE("GPL");
>>



--
Shine bright,
(: Nav :)
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux